• Journal of Korean Clinical Nursing Research
• /
• v.23 no.3
• /
• pp.267-280
• /
• 2017

Purpose: The purpose of this study was to describe the status of infection control nurses (ICNs) and their activities, and to identify the factors affecting the level of infection control activities. Methods: Data were collected from 199 hospitals from June 24 to July 26, 2016. The structured questionnaires included status of infection control nurses, type and level of infection control activities. Results: Most participating hospital were advanced general hospital (20.1%) and general hospital (67.8%). Among the hospitals, 86.4% had an infection control department (ICD). The average hospital work experience of ICNs was 14.62 years, and their average infection control career was for 4.94 years. Among the ICNs, 85.6% worked in full time and the average number of beds per ICN was 311.21. There were significant differences in the existence of ICD, infection control activities including surveillance, outbreak investigation, negative pressure room, hand hygiene monitoring, disinfection, and sterilization according to hospital size. The level of infection control activities was higher with more number of ICNs, ICN employment as full time, and healthcare institution accreditation status. The explanatory power was 37.5%. Conclusion: These results of this study which reflect infection control status of healthcare facilities with more than 150 beds in 2016 will provide baseline data to establish infection control system in small to medium sized hospitals after the Middle East Respiratory Syndrome outbreak in 2015.

• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2013

The toxic, Harmful Algal Blooms (HABs) caused by the Cochlodinium polykrikoides have a serious impact on the coastal waters of Korea. In this study, the acoustic detection system was developed for rapid HABs detection, based on the acoustic backscattering properties of the C. polykrikoides. The developed system was mainly composed of a pulser-receiver board, a signal processor board, a control board, a network board, a power board, ultrasonic sensors (3.5 and 5.0 MHz), an environmental sensor, GPS, and a land-based control unit. To evaluate the performance of the system, a trail was done at a laboratory, and two in situ trials were conducted: (1) when there was no red tide, and (2) when there was red tide. In the laboratory evaluation, the system performed well in accordance with the number of C. polykrikoides in the received level. Second, under the condition when there was no red tide in the field, there was a good correlation between the acoustic data and sampling data. Finally, under the condition when there was red tide in the field, the system successfully worked at various densities in accordance with the number of C. polykrikoides, and the results corresponded with the sampling data and monitoring result of NFRDI (National Fisheries Research & Development Institute). From the laboratory and field evaluations, the developed acoustic detection system for early detecting HABs has demonstrated that it could be a significant system to monitor the occurrence of HABs in coastal regions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.124-129
• /
• 2013

Hexapod walking robots are superior to biped or quadruped ones in terms of walking stability. Therefore hexapod robots have the advantage in performing intelligent tasks based on walking stability. In this paper, we propose a hexapod robot that has one fore leg, one hind leg, two left legs, and two right legs and can perform various intelligent tasks. We build the robot by using 26 motors and implement a controller which consists of a host PC, a DSP main controller, an AVR auxiliary controller, and smart phone/pad. We show by several experiments that the implemented robot can perform various intelligent tasks such as uneven surface walking, tracking and kicking a ball, remote control and 3D monitoring by using data obtained from stereo camera, infrared sensors, ultra sound sensors, and contact sensors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.265-270
• /
• 2022

With the advent of the Fourth Industrial Revolution, the paradigm of finance is also changing. As remote work becomes more active due to cloud computing and coronavirus, the work environment changes and attack techniques are becoming intelligent and advanced, companies should accept new security models to further strengthen their current security systems. Zero trust security increases security by monitoring all networks and allowing strict authentication and minimal access rights for access requesters with the core concept of doubting and not trusting everything. In addition, the use of NAC and EDR for identification subjects and data to strengthen access control of the zero trust-based security system, and strict identity authentication through MFA will be explained. Therefore, this paper introduces a zero-trust security solution that strengthens existing security systems and presents the direction and validity to be introduced in the financial sector.

• Smart Media Journal
• /
• v.13 no.3
• /
• pp.18-26
• /
• 2024

Road surface monitoring is essential for maintaining road environment safety through managing risk factors like rutting and crack detection. Using autonomous driving-based UGVs with high-performance 2D laser sensors enables more precise measurements. However, the increased energy consumption of these sensors is limited by constrained battery capacity. In this paper, we propose a fusion sensor system for efficient surface monitoring with UGVs. The proposed system combines color information from cameras and depth information from line laser sensors to accurately detect surface displacement. Furthermore, a dynamic sampling algorithm is applied to control the scanning frequency of line laser sensors based on the detection status of monitoring targets using camera sensors, reducing unnecessary energy consumption. A power consumption model of the fusion sensor system analyzes its energy efficiency considering various crack distributions and sensor characteristics in different mission environments. Performance analysis demonstrates that setting the power consumption of the line laser sensor to twice that of the saving state when in the active state increases power consumption efficiency by 13.3% compared to fixed sampling under the condition of λ=10, µ=10.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.19-26
• /
• 2011

We are carried out power performance testing for 3MW wind turbine system at Je-ju wind turbine testing Site and analyzed measured data which was stored through monitoring system. In this paper, we described the power performance testing results and analyzed an uncertainty of measured data sets. The power curve with measured power data is closely coincide with designed power curve except for the low wind speed sections(4m/s~7m/s) and the annual energy production which is given Ray leigh distribution was included with 1.5~5.9% of uncertainty in the wind speed region as 4~11m/s. Although the deviation of curve between measured power and designed power is high, the difference of annual energy production is low in the low wind speed region.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.21-26
• /
• 2019

This paper is purposed to develop hardware for controlling abnormal temperature that can occur environment and component itself in PCS. In order to be purpose, the hardware which is four part(sensing, PLC, monitoring and output) keep detecting temperature for critical components of PCS and can control the abnormal temperature. Apply to the hardware, it is selected to PV power generation facilities of 20 kW in Cheong-ju city and measured the data for one year in 2017. Through the temperature data, it is found critical components of four(discharge resistance, DC capacitor, IGBT, DSP board) and entered the setting value for operating the fan. The setting values for operating the fan are up to $130^{\circ}C$ in discharge resistance, $60^{\circ}C$ in DC capacitor, $55^{\circ}C$ in IGBT and DSP board. The hardware is installed at the same PCS(20 kW in Cheong-ju city) in 2018 and the power generation output is analyzed for the five days with the highest atmospheric temperature(Clear day) in July and August in 2017 and 2018 years. Therefore, the power generation output of the PV system with hardware increased up to 4 kWh.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.26-32
• /
• 2011

It is very important for more effective military operation to share information required in recognizing a situation by monitoring battlefield. The recognition of situations is offered visually though multi-media systems such as a COP(Common Operation Picture), UAV etc. The operating method has rapidly changed into Network-Centric Warfare (NCW). As a result, the data that these Multimedia systems should control is increasing. Improved performance of Multimedia systems is required to deal with them. In this paper, we propose Extended-Military Multimedia System(E-MMS) applying the most excellent scheduling method in terms of meet-ratio in real time when Multimedia systems carry out assigned information in real time for monitoring as the method of improved performance. As a result of utility about proposed system, it is verified that realtime EDF(Earliest Deadline First) scheduling method is more improved up to 20% compared to non-realtime FCFS(First Come First Service) in terms of the deadline meet ratio.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.5
• /
• pp.751-760
• /
• 2021

This study investigated the changes in water quality parameters and microbial colonies when ozone was applied to a semi-recirculating aquaculture system (semi-RAS) for the olive flounder Paralichthys olivaceus (500 g in average weight). Concentrations of ozone-produced oxidants (OPO) in rearing tanks were maintained at 0, 0.014, 0.025 mg/L as Cl₂ for 26 days. Except total ammonia nitrogen, nitrite nitrogen, nitrate nitrogen, phosphate phosphorus, chemical oxygen demand, and total suspended solids decreased significantly with increasing OPO concentration in daily and weekly monitoring (P<0.05). Colony forming unit (CFU) counts of heterotrophic marine bacteria decreased in an OPO concentration-dependent manner. Overall reduction rates of microbial colonies in the treatments were 80% higher than those of the control (P<0.05). During the experiment, the OPO concentration-driven ozonation was reliably practiced without any adverse effects on the animals cultured in semi-RAS. Considering the biohazard, operating cost, and stability of ozonation, an OPO concentration of 0.014 mg/L would be sufficient to control water quality parameters and microbial colonies in a semi-RAS.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.6
• /
• pp.115-124
• /
• 2019

In a climate change environment where heat damage and drought occur during a rainy season such as in 2018, a vegetation-based LID system that enables disaster prevention as well as environment improvement is suggested in lieu of an installation-type LID system that is limited to the prevention of floods. However, the quantification of its performance as against construction cost is limited. This study aims to present an experiment environment and evaluation method on quantitative performance, which is required in order to disseminate the vegetation-based LID system. To this end, a 3^rd quartile huff time distribution mass curve was generated for 20-year frequency, 60-minute probable rainfall of 68mm/hr in Cheonan, and effluent was analyzed by recreating artificial rainfall. In order to assess the reliability of the rainfall event simulator, 10 repeat tests were conducted at one-minute intervals for 20 minutes with minimum rainfall intensity of 22.29mm/hr and the maximum rainfall intensity of 140.69mm/hr from the calculated probable rainfall. Effective rainfall as against influent flow was 21.83mm/hr (sd=0.17~1.36, n=20) on average at the minimum rainfall intensity and 142.27mm/hr (sd=1.02~3.25, n=20) on average at the maximum rainfall intensity. In artificial rainfall recreation experiments repeated for three times, the most frequent quartile was found to be the third quartile, which is around 40 minutes after beginning the experiment. The peak flow was observed 70 minutes after beginning the experiment in the experiment zone and after 50 minutes in the control zone. While the control zone recorded the maximum runoff intensity of 2.26mm/min(sd=0.25) 50 minutes after beginning the experiment, the experiment zone recorded the maximum runoff intensity of 0.77mm/min (sd=0.15) 70 minutes after beginning the experiment, which is 20 minutes later than the control zone. Also, the maximum runoff intensity of the experiment zone was 79.6% lower than that of the control zone, which confirmed that vegetation unit-type LID system had rainfall runoff reduction and delay effects. Based on the above findings, the reliability of a lab-level rainfall simulator for monitoring the vegetation-based LID system was reviewed, and maximum runoff intensity reduction and runoff time delay were confirmed. As a result, the study presented a performance evaluation method that can be applied to the pre-design of the vegetation-based LID system for rainfall events on a location before construction.