• Journal of Food Hygiene and Safety
• /
• v.37 no.6
• /
• pp.394-399
• /
• 2022

This study was conducted to estimate hazardous heavy metal content, including lead (Pb), cadmium (Cd), arsenic (As) and mercury (Hg) in 120 collagen products currently marketed in Korea. Hg concentration was analyzed by a gold amalgamation method using a mercury analyzer, while concentrations of Pb, Cd, and As were analyzed by ICP-OES. The average Pb concentration was 0.097 mg/kg. For comparison, respective average concentrations were 0.108 mg/kg, 0.084 mg/kg, 0.131 mg/kg, and 0.149 mg/kg in functional health foods, other processed products, beverages, and fruit/vegetable processed products. The average concentration of Cd was 0.026 mg/kg. All products in which Cd was detected were functional health foods. The average concentration of As was 0.097 mg/kg, with respective average concentrations of 0.091 mg/kg, 0.133 mg/kg, and 0.086 mg/kg in functional health foods, other processed products, and fruit/vegetable processed products. The average Hg concentration was 0.0025 mg/kg, with respective average concentrations of 0.0012 mg/kg, 0.0028 mg/kg, 0.0013 mg/kg, and 0.0031 mg/kg in functional health foods, other processed products, fruit/vegetable processed products, and candies respectively. Heavy metal levels in beverages and candy products with set heavy metal standards were below the set standards. Even products without regulatory standards were found to be relatively safe compared with heavy metal standards set for domestic and foreign foods.

• Journal of Food Hygiene and Safety
• /
• v.37 no.6
• /
• pp.385-393
• /
• 2022

The contamination level of inorganic arsenic, a human carcinogen, was investigated in 87 grains and 66 processed grain foods. Two inorganic arsenic species arsenite (As(III)) and arsenate (As(V)) and four organic arsenic monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, arsenocholine were analyzed using HPLC-ICP/MS with high separation and sensitivity and ICP/MS was used to quantify total arsenic. Inorganic arsenic was detected in all grains. And the total arsenic in grains consists of about 70-85% inorganic arsenic and about 10-20% DMA. The concentration of inorganic arsenic was high in rice and black rice cultivated in paddy soil with irrigated water, while the miscellaneous grain in field was low. Mean concentration of inorganic arsenic in rice germ, brown rice and polished rice was 0.160 mg/kg, 0.135 mg/kg, 0.083 mg/kg, respectively, indicating that rice bran contains more arsenic. In processed grain foods, inorganic arsenic concentration varied according to the kind of ingredients and content, and the detection amount was high in processed food with brown rice and germ. The arsenic content of all samples did not exceed each standard, but the intake frequency is high and it is considered that continuous monitoring is necessary for food safety.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.613-621
• /
• 2022

The study aim was to investigate changes in the diameter, number of standing trees, stand volume per ha and site index by the forest survey order, climate zone (northern temperate, central temperate, southern temperate, and warm temperate regions), and altitude in 100 m intervals) by collecting samples of Robinia pseudoacacia from the fifth, sixth, and seventh national forest survey datasets. The rotation cutting age, which is a standard used for wood, was calculated. The changes were statistically analyzed by performing ANOVA and the Duncan multiple test. Diameter growth naturally increased according to the forest survey order and was lowest in the southern temperate region by climate zone and lowest at the 301-400 m altitude. The number of standing trees per ha did not change according to the forest survey order and altitude, and the density was highest in the central temperate region and lowest in the southern temperate region. The stand volume per ha increased according to the forest survey order, and the climate zone was divided into two groups: ① northern temperate region and central temperate region, ② southern temperate region and warm temperate region. The stand volume growth was highest at the 201-300 m point. Thesite index showed results similar to the change pattern of the stand volume per ha. The growth curve, which can be seen by the change in stand volume per ha, was estimated by applying theWeibull formula, and the stand volume per ha was estimated to reach approximately 200 m³/ha at 50-60 years. The rotation of the highest production in volume, which is the standard for using trees as wood rather than honey sources, was calculated to be 34 years.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.175-182
• /
• 2022

Heavy metals can be intentionally or unintentionally introduced into plastic food utensils, containers, and packaging (PFUCP) as additives or contaminants, which can be ingested with food by humans. Here, seven-heavy metals (lead, cadmium, nickel, chromium, antimony, copper, and manganese) with toxicity concerns were selected, and risk assessment was done by establishing their migration from 137 PFUCP products made of 16 materials distributed in Korea. Migration of heavy metals was examined by applying 4% acetic acid as a food simulant (70℃, 30 minutes) to the PFUCP products. Inductively coupled plasma mass spectrometry (ICP-MS) was employed for the analysis of migrated heavy metals, and the reliability of quantitative results was confirmed by checking linearity, LOD, LOQ, recovery, precision, and expanded uncertainty. As a result of monitoring, heavy metals were detected at a level of non-detection to 8.76 ± 11.87 ㎍/L and most of the heavy metals investigated were only detected at trace amounts of less than 1 ㎍/L on average. However, antimony migrated from PET products was significantly higher than other groups. Risk assessment revealed that all the heavy metals investigated were safe with a margin of exposure above 311. Collectively, we demonstrated that heavy metals migrated from PFUCP products distributed in Korea appear to be within the safe range.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1041-1052
• /
• 2022

This study is to estimate the optimal ecological flow and analysis the spatial distribution of fish habitat for Andong dam downstream reach (4,565.7 km²) using PHABSIM (Physical Habiat Simulation System) and River2D. To establish habitat models, the cross-section informations and hydraulic input data were collected uisng the Nakdong river basic plan report. The establishment range of PHABSIM was set up about 410.0 m from Gudam streamflow gauging station (GD) and about 6.0 km including GD for River2D. To select representative fish species and construct HSI (Habitat Suitability Index), the fish survey was performed at Pungji bridge where showed well the physical characteristics of target stream located downstream of GD. As a result of the fish survey, Zacco platypus was showed highly relative abundance resulting in selecting as the representative fish species, and HSI was constructed using physical habitat characteristics of the Zacco platypus. The optimal range of HSI was 0.3~0.5 m/s at the velocity suitability index, 0.4~0.6 m at the depth suitability index, and the substrate was sand to fine gravel. As a result of estimating the optimal ecological flow by applying HSI to PHABSIM, the optimal ecological flow for target stream was 20.0 m³/sec. As a result of analysis two-dimensional spatial analysis of fish habitat using River2D, WUA (Weighted Usable Area) was estimated 107,392.0 m²/1000 m under the ecological flow condition and it showed the fish habitat was secured throughout the target stream compared with Q₃₅₅ condition.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.347-355
• /
• 2022

The safety valve (PSV) is a safety device that automatically releases a spring when the pressure generated by various causes reaches the set pressure, and is restored to a normal state when the pressure falls below a certain level. Periodic inspection and monitoring of safety valves are essential so that they can operate normally in abnormal conditions such as pressure rise. However, as the current safety inspection is performed only at a set period, it is difficult to ensure the safety of normal operation. Therefore, evaluation items were developed by finding failure modes and causative factors of safety valves required for safety management. In addition, it is intended to provide decision-making information for securing safety by deriving the priority of items. To this end, a Delphi survey was conducted three times to derive evaluation factors that were judged to be important in relation to the Failure Mode Cause Factor (FMCFs) of the safety valve (PSV) targeting 15 experts. As a result, 6 failure modes of the safety valve and 22 evaluation factors of its sub-factors were selected. In order to analyze the priorities of the evaluation factors selected in this way, the hierarchical structure was schematized, and the hierarchical decision-making method (AHP) was applied to the priority calculation. As a result of the analysis, the failure mode priorities of FMCFs were 'Leakage' (0.226), 'Fail to open' (0.201), 'Fail to relieve req'd capacity' (0.152), 'Open above set pressure' (0.149), 'Spuriously' 'open' (0.146) and 'Stuck open' (0.127) were confirmed in the order. The lower priority of FMCFs is 'PSV component rupture' (0.109), 'Fail to PSV size calculation' (0.068), 'PSV Spring aging' (0.065), 'Erratic opening' (0.059), 'Damage caused by improper installation and handling' (0.058), 'Fail to spring' (0.053), etc. were checked in the order. It is expected that through efficient management of FMCFs that have been prioritized, it will be possible to identify vulnerabilities of safety valves and contribute to improving safety.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.72-87
• /
• 2022

For the sustainable development and conservation of the national land, planned development and efficient environmental conservation must be accompanied. To this end, it is possible to induce development and conservation to harmonize by deriving factors affecting development through analysis of previously developed areas and applying appropriate management measures to areas with high development pressure. In this study, the relationship between the area where the land cover changed from forest to urbanization and various social, geographical, and restrictive factors was implemented in a regression formula through logistic regression analysis, and potential development sites were analyzed for Yongin City. The factor that has the greatest impact on the analysis of potential development area is the restrict factors such as Green Belt and protected areas, and the factor with the least impact is the population density. About 148km²(52%) of Yongin-si's forests were analyzed as potential development area. Among the potential development sites, the area with excellent environmental value as a protected area and 1st grade on the Environment Conservation Value Assessment Map was derived as about 13km². Protected areas with high development potential were riparian buffer zone and special measurement area, and areas with excellent natural scenery and river were preferred as development areas. Protected areas allow certain actions to protect individual property rights. However, there is no clear permit criteria, and the environmental impact of permits is not understood. This is identified as a factor that prevents protected areas from functioning properly. Therefore, it needs to be managed through clear exception permit criteria and environmental impact monitoring.

• Journal of The Korean Association For Science Education
• /
• v.41 no.6
• /
• pp.441-454
• /
• 2021

In this study, we propose the composition of contents on the area of astronomy for high school Earth Science elective courses for the 2022 revised curriculum based on high school students' perceptions of changes in Earth Science core concepts over the curriculum revisions, and analysis of learning elements in the area of astronomy for domestic and foreign Earth Science curriculum. Four Earth Science education experts compared and analyzed the astronomy contents presented in Korea, the US, British Columbia (BC) in Canada, Japan, and the International Baccalaureate Diploma Program (IBDP) curriculum. According to the survey results, high school students who answered that they were most interested in the core concepts of astronomy expressed a lot of regret that the contents related to astronomical observation were eliminated from the 2015 revised curriculum. As a result of comparing domestic and foreign curriculum, Korea and IBDP curriculum dealt with the largest amount of learning elements in astronomy. In the case of BC in Canada and IBDP, astronomy was offered as an independent subject, and the curriculums of Japan and Korea dealt with astronomy in the Earth Science subject. According to the results, it is necessary to develop general elective courses in Earth Science with astronomy-related contents with high discriminating power in order to strengthen astronomy education. Since astronomy requires background knowledge from various disciplines and inter-disciplinary learning was required, it is necessary to organize the career-related elective courses in Earth Science so that astronomy can be dealt with according to the knowledge structure of general Astronomy. Based on the research results, ways to organize astronomy contents for Earth Science elective courses were suggested.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.91-109
• /
• 2022

The ocean is a significant sink for atmospheric anthropogenic CO₂, absorbing one-third of the total CO₂ emitted by human activities. In return, oceans have experienced significant declines in seawater pH and the aragonite saturation state also called ocean acidification. This study evaluates the distribution of aragonite saturation state, an indicator to assess the potential threat from ocean acidification, by combining newly obtained data from the west coast of South Korea with previous datasets covering the Yellow Sea, East Sea, northern South China Sea, and southeast coast of South Korea. In general, offshore waters absorb atmospheric CO₂; however, most of the collected water samples show aragonite oversaturation. On the southeast coast, the aragonite saturation state was significantly affected by river discharge and associated variables, such as freshwater input with nutrients, seasonal stratification, biological carbon fixation, and bacterial remineralization. In summer, hypoxia and mixing with relatively acidic freshwater made the Jinhae and Gwangyang Bays undersaturated with respect to aragonite, possibly threatening marine organisms with CaCO₃ shells. However, widespread aragonite undersaturation was not observed on the west coast, which receives considerable river water discharge. In addition, occasional upwelling events may have worsened the ocean acidification in the southwestern part of the East Sea. These results highlight the importance of investigating site-specific ocean acidification processes in coastal waters. Along with the above-mentioned seasonal factors, the dissolution of atmospheric CO₂ and the deposition of atmospheric acidic substances will continue to reduce the aragonite saturation state in Korean waters. To protect marine ecosystems and resources, an ocean acidification monitoring program should be established for Korean waters.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.931-939
• /
• 2022

In Korea, about two-thirds of the precipitation is concentrated in the summer season, so the problem of turbidity in the summer flood season varies from year to year. Concentrated rainfall due to abnormal rainfall and extreme weather is on the rise. The inflow of turbidity caused a sudden increase in turbidity in the water, causing a problem of turbidity in the dam reservoir. In particular, in Korea, where rivers and dam reservoirs are used for most of the annual average water consumption, if turbidity problems are prolonged, social and environmental problems such as agriculture, industry, and aquatic ecosystems in downstream areas will occur. In order to cope with such turbidity prediction, research on turbidity modeling is being actively conducted. Flow rate, water temperature, and SS data are required to model turbid water. To this end, the national measurement network measures turbidity by measuring SS in rivers and dam reservoirs, but there is a limitation in that the data resolution is low due to insufficient facilities. However, there is an unmeasured period depending on each dam and weather conditions. As a sensor for measuring turbidity, there are Optical Backscatter Sensor (OBS) and YSI, and a sensor for measuring SS uses equipment such as Laser In-Situ Scattering and Transmissometry (LISST). However, in the case of such a high-tech sensor, there is a limit due to the stability of the equipment. Therefore, there is an unmeasured period through analysis based on the acquired flow rate, water temperature, SS, and turbidity data, so it is necessary to develop a relational expression to calculate the SS used for the input data. In this study, the AEM3D model used in the Water Resources Corporation SURIAN system was used to improve the accuracy of prediction of turbidity through the turbidity-SS relationship developed based on the measurement data near the dam outlet.