• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1954-1956
• /
• 1996

In this paper, we measured the reflectance of the $100{\mu}m{\times}100{\mu}m$ micromirror. In order to reduce the size of the HeNe laser beam, an eyepiece and an objective lens were used. CCD camera was used to the monitor the position and focusing. It was found that the diameter of the focused laser beam was about $3{\mu}m$. The reflectance of the reflectance of the micromirror was over the surface and 87% of the commercial mirror.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.921-923
• /
• 2002

Vertically Aligned (VA) technology is an advanced technology for TFT-LCDs, which is mainly used in larger size displays like monitors for desktop computers and even for TVs. We will review our recent developments of Liquid Crystal (LC) mixtures for VA display modes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.436-436
• /
• 2000

In order to monitor the belt from being damaged by impact of large lump of materials in ores being transported on conveyor belt, we developed a conveyor belt monitoring system using vision. By the information such as the position and size of the damage of belt obtained by vision system, it is expected that not only the span of belt life will be lengthened, but also this system can enable operators to plan scheduled maintenance and prevent the enlargement of damaged parts in conveyor belt at an early stage

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.26-31
• /
• 2015

This paper describes the characteristics of voltage drop and thermal for poor connection on electrical connector of circuit breaker in control box of small size pulverizer. In order monitor, we did the changes of RMS in voltage and temperature value with video and made normal state over $2.5N{\cdot}m$ and poor connections state below $0.2N{\cdot}m$ by screw gage. In case of voltage signal, the voltage drop was increased when the current was increased due to poor connections. In case of temperature signal, the temperature difference indicates ten times at 5A and fourteen times at 15A in the normal state. According to increase thermal energy, the insulation of electrical wiring and connector of circuit breaker can be carbonized. The results of this study will be useful to the development of preventive devices and system for electric fire by poor connection at small size pulverizer.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.99-105
• /
• 2010

The concentration and size analysis of in-situ suspended particulate material were measured using an optical instrument, LISST-100, in the bottom layer at the three inlets of the Seomjin River Estuary, mouth of Gwangyang bay, and Gwangyang bay-side of the Namhae Bridge. In the Seomjin river estuary and mouth of Gwangyang bay-side of the Namhae Bridge, the in-situ mean grain size of the suspended material changed from a uni-modal distribution with a dominant peak at a coarse fraction to a bi-modal distribution with a secondary peak at the finer particles. Seomjin River. The interactions between suspended particulate concentration and beam attenuation coefficient of suspended particulate matters depended on the supply of finer and coarser particles in the mouth of Gwangyang Bay and Seomjin River. So, interactions reflected difference of the concentration, mean size and sorting of suspended particulate matters. The difference of interaction showed dynamic behaviors to the resuspension and deflocculation processes increased river discharge. This showed that it may be possible to use the interactions between the suspended particle concentration and beam attenuation coefficient to monitor the temporal and spatial distributions of in-situ particles.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1234-1241
• /
• 2006

The purpose of this study was to identify the sizing problems for shoes, and provide improvement information for shoe industries in internet shopping mall. For this, the study was conducted through a survey with 611 young women consumers from late 10s to late 20s. In addition, we investigated the actual conditions of shoe size system from manufacturers and vendors of internet shopping mall. On the survey from consumers, it was revealed that the main reason which makes the consumers hesitate to purchase is the difference between the image or size shown by the monitor and the actual product. Also, the problem was substantiated through status of internet shoe vendors. Moreover, it was found that consumers rarely have the knowledge of the letter sizes for the foot girth at purchasing shoe. To overcome the problems of shoe size system in internet shopping industry, the new sizing system that both consumers and vendors can satisfy is needed immediately.

• Communications for Statistical Applications and Methods
• /
• v.22 no.5
• /
• pp.519-530
• /
• 2015

The geometric chart has proven more effective than Shewhart p or np charts to monitor the proportion nonconforming in high-quality processes. Implementing a geometric chart commonly requires the assumption that the in-control proportion nonconforming is known or accurately estimated. However, accurate parameter estimation is very difficult and may require a larger sample size than that available in practice in high-quality process where the proportion of nonconforming items is very small. Thus, the error in the parameter estimation increases and may lead to deterioration in the performance of the control chart if a sample size is inadequate. We suggest adjusting the control limits in order to improve the performance when a sample size is insufficient to estimate the parameter. We propose a linear function for the adjustment constant, which is a function of the sample size, the number of nonconforming items in a sample, and the false alarm rate. We also compare the performance of the geometric charts without and with adjustment using the expected value of the average run length (ARL) and the standard deviation of the ARL (SDARL).

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.285-291
• /
• 2003

The nanosized silver and gold particles are prepared by ERC method in which metal vapors with high temperature is rapidly quenched by coolants such as liquid nitrogen or liquid argon. In order to monitor the crystal structural changes on the internal and the surface of the nanosized noble metal particles, lattice parameter, internal strain and Debye-Waller factor are investigated, and the calculation of X-ray diffraction scattering intensity is performed. The lattice parameters of silver and gold particles agree with those of bulk materials, and crystal internal strain of the metal particles is not changed by rapid cooling. The Debye-Waller factor of gold particles is increased with decreasing particle size because of the surface softening phenomenon of nanosized particles, but the crystal structural change on the surface of the particles is not detected from the comparison the calculated X-ray diffraction profile with the experimental profile on gold particles with the particle size of 4 nm.

• Publications of The Korean Astronomical Society
• /
• v.18 no.1
• /
• pp.37-41
• /
• 2003

We have developed a seeing monitoring system and measured seeing variation of the Bohyunsan Optical Astronomy Observatory (BOAO) and the Sobaeksan Optical Astronomy Observatory (SOAO) using a small telescope system. Our seeing monitoring system is similar to the differential image motion monitor (DIMM) installed at the ESO. The ooly difference between the BOAO and the SOAO seeing monitoring system is a detector system, a video camera at the BOAO and ST-4 camera at the SOAO. We confirmed that the seeing monitoring system at the SOAO can measure average seeing size inspite of its simple detector system. From the BOAO seeing measurement, we found that the seeing size changes fast. We expect that our seeing monitoring system could be used for real time seeing monitoring after some improvement, and the data to be obtained would be very useful when we build adaptive optic system in the future.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1520-1524
• /
• 2000

TCP congestion control algorithm prevents network congestion through the control of outgoing traffic size. The network, therefore, should monitor the incoming traffic size of a TCP to determine whether or not a TCP follows standard congestion control algorithms. Some TCP friendly test algorithms are proposed, But, these algorithms cannot be used in real environments because a router in a network does not know the RTT of a TCP flow. In this study, we propose a new RTT determination algorithm that can be used in a router. Our proposed algorithms is validated through the simulation studies.