• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.3
• /
• pp.133-140
• /
• 2014

The friction damper can be used for improving the seismic resistance of existing buildings. The damper is often installed in bracing members. The energy dissipation capacity of the damping systems depends on the type of the structure, the configuration of the bracing members, and the property of dampers. In Korea, there are numerous low- to mid-rise reinforced concrete moment frames that were constructed considering only gravity loads. Those frames may be vulnerable for future earthquakes. To resolve the problem, this study developed a toggle bracing system with a high density friction damper. To investigate the improvement of reinforced concrete frames after retrofit using the developed damped system, experimental tests were conducted on frame specimens with and without the damped system. The results showed that the maximum strength, initial stiffness and energy dissipation capacity of the framed with the damped system were much larger than those of the frame without the damped system.

• Journal of Advanced Navigation Technology
• /
• v.17 no.2
• /
• pp.183-188
• /
• 2013

In this paper, the TE (Transverse Electric) scattering problems by a perfectly conducting strip grating over a grounded two dielectric layers with edge boundary condition are analyzed by applying the FGMM (Fourier Galerkin Moment Method). For the TE scattering problem, the induced surface current density is expected to the zero value at both edges of the strip, then the induced surface current density on the strip is expanded in a series of the multiplication of the Chebyshev polynomials of the second kind and the functions of appropriate edge boundary condition. The numerical results shown the fast convergent solution and good agreement compared to those of the existing papers.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.96-104
• /
• 2003

This paper presents the measurement and correction method of PCB alignment errors for PCB screen printer. Electronic equipment is getting smaller and yet must satisfy high performance standard. Therefore, there is a great demand for PCB with high density. However conventional PCB screen printer doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because the alignment errors of PCB occur when it is loaded to the screen printer. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors with high-accuracy. An automatic optical inspection part measures the PCB alignment errors using machine vision, and the high-accuracy 3-axis stage makes correction for these errors. This system used two CCD cameras to get images of two fiducial marks of PCB. The centers of fiducial marks are obtained by using moment, gradient method. The first method is calculating the centroid by using first moment of blob, and the latter method is calculating the center of the circle whose equation is obtained by curve-fitting the boundaries of fiducial mark. The operating system used to implement the whole set-up is carried in Window 98 (or NT) environment. Finally we implemented this system to PCB screen printer.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2342-2352
• /
• 1995

Deposition of flame-synthesized silica particles onto a target is utilized in optical fiber preform fabrication processes. The particles are convected and deposited onto the target. Falkner-Skan wedge flow was chosen as the particle laden flow. Typically the particles are polydisperse in size and follow a lognormal size distribution. Brownian diffusion, thermophoresis, and coagulation of the particles were considered and effects of these phenomena on particle deposition were studied. A moment model was developed in order to predict the particle number density and the particle size distribution simultaneously. Particle deposition with various wedge configurations was examined for conditions selected for a typical VAD process. When coagulation was considered, mean particle size and its standard deviation increased and particle number density decreased, compared to the case without coagulation. These results proved the fact that coagulation effect expands particle size distribution. The results were discussed with characteristics of thermal and diffusion boundary layers. As the boundary layers grow in thickness, overall temperature and concentration gradients decrease, resulting in decrease of deposition rate and increase of particle residence time in the flow and thus coagulation effect.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.885-888
• /
• 2011

We report the first vibrational band assignment of imidazole trimer (IMT) solvated in helium nanodroplets. Several congested vibrational bands of imidazole (IM) clusters were obtained in the frequency region of $3513-3515\;cm^{-1}$ and vibrationally resolved due to the extremely low temperature (0.37 K) and very weak solutesolvent interaction environments of helium droplets. The unambiguous free NH band assignment was achieved with an aid of pick-up oven temperature dependence and vibrational transition moment angle (VTMA) experiments as well as density functional theory (DFT) calculations. The band at $3514.3\;cm^{-1}$ is attributed to the free NH stretching mode of linear IMT clusters, easily formed by the dipole-dipole interactions of IM in ultracold helium nanodroplets.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.1
• /
• pp.12-16
• /
• 2021

The magnetic properties of heat treated O-series high temperature superconducting (HTS) GdBCO coated conductor (CC) tapes which were formed of Ag/GdBCO/Buffer-layers/Stainless Steel (SS), were investigated by employing a Quantum Design PPMS-14. Using a modified Bean model, the critical current density J_c values have been estimated from the 𝚫m_irr(H) data, which are obtained by measuring the magnetic moment m(H) loops. For a range of intermediate fields, which are interacting or collective flux pinning area, the magnetic flux behaviors were investigated from the relationship J_c ∝ H^-β. In addition, the changes of irreversibility magnetic field H_irr line of heat-treated O-series HTS GdBCO CC tapes were analyzed, according as the annealing temperature under oxygen flowing increases. Both weak and strong break-downs were found by examining the changes of irreversibility magnetic field H_irr lines.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.29-35
• /
• 2022

We fabricated MHOS (multi-HTS layers on one substrate) high-temperature superconducting (HTS) REBCO conductors using HTS REBCO coated conductor (CC) A-specimen, which induces an artificial magnetic flux pinning effect, and HTS REBCO CC B-specimen, that does not induce this effect. The superconducting magnetic properties of the fabricated MHOS conductors were examined by measuring their magnetic moment m(H) curves using a physical property measurement system (QD PPMS-14). The critical current density (J_c) characteristics of our four-layered MHOS HTS REBCO conductor specimens such as BAAB, BBBB, and AAAA were lower than those of their two-layered and three-layered counterparts. At a temperature T of 30 K the magnetic flux pinning physical indicator δ values (obtained from the relationship J_c ∝ H^-δ) of the three-layer ABA (δ = 0.35) and two-layer AB (δ = 0.43) specimens were found to be significantly lower than those of the four-layer ABBA (δ = 0.51), BAAB (δ = 0.60), AAAA (δ = 0.78) and BBBB (δ = 0.81) structures.

• Geomechanics and Engineering
• /
• v.30 no.6
• /
• pp.517-524
• /
• 2022

Every year, millions of waste tires are discarded across the world. Storage of waste tires presents many problems such as fire threats, epidemics, and non-economic factors. Furthermore, the disintegration process of waste tires is not economical or practical due to its time-consuming, and disposal requirements. In this study, half-section waste tires (HSWTs) were integrated with high-density polyethylene (HDPE) pipes under different relative density conditions. The main aim of the study was to reduce the deformation values of embedded HDPE pipes in sandy soil and to evaluate the soil-pipe interaction. In comprehensive laboratory tests, half-section waste tires were integrated in two different ways: in the middle of the pipeline and along the pipeline. Accordingly, it was concluded that the effectiveness of waste tires reduces the deformation and bending moment values in the critical regions of pipes. As a result of reinforcement in the mid-point of the pipe defined as the most critical region, 52% and 36% less deformation was observed in the crown and springlines of the pipe, respectively. In addition, the bending moment values for the same critical section were determined to be 40% less in the crown and 28% less in the springline regions of the pipe.

• Journal of Advanced Navigation Technology
• /
• v.18 no.4
• /
• pp.371-375
• /
• 2014

In this paper, the solutions of TE(transverse electric) scattering problems by a resistive strip grating over a grounded dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential magnetic field and the induced surface current density on the resistive strip. The induced surface current density of resistive strip is obtained by difference of the up and down of the magnetic field in two boundary areas of the resistive strip. The numerical results for reflected power of zeroth order mode analyzed by according as the resistivity, the width and spacing of resistive strip, the relative permittivity and thickness of dielectric layer, and incident angles. The numerical results shown in good agreement compared to those of the existing papers using FGMM(fourier galerkin moment method).

• Journal of Korea Water Resources Association
• /
• v.39 no.10 s.171
• /
• pp.891-904
• /
• 2006

The estimation of the probability precipitation is essential for the design of hydrologic projects. The techniques to calculate the probability precipitation can be determined by the point frequency analysis and the regional frequency analysis. The regional frequency analysis includes index-flood technique and L-moment technique. In the regional frequency analysis, even if the rainfall data passed homogeneity, suitable distributions can be different at each point. However, the regional frequency analysis can supplement the lacking precipitation data. Therefore, the regional frequency analysis has weaknesses compared to parametric point frequency analysis because of suppositions about probability distributions. Therefore, this paper applies kernel density function to precipitation data so that homogeneity is defined. In this paper, The data from 16 rainfall observatories were collected and managed by the Korea Meteorological Administration to achieve the point frequency analysis and the regional frequency analysis. The point frequency analysis applies parametric technique and nonparametric technique, and the regional frequency analysis applies index-flood techniques and L-moment techniques. Also, the probability precipitation was calculated by the regional frequency analysis using variable kernel density function.