• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.6
• /
• pp.807-818
• /
• 2004

The antibacterial activities of several types of chitosan were measured against Staphylococcus aureus and evaluated for their application to antibacterial textile finishing. The ％ reduction of bacteria of the chitosans prepared in our laboratory were between 72 and 87%. The two water-soluble chitosans with molecular weights 1,000 and 3,000 did not show antibacterial activities. The deacetylation of chitosan was appeared to increase antibacterial activity. The ％ reduction in bacterial density of the 86％-deacetylated chitosan solution was 56% where that of the 76％-deacetylated chitosan solution was only 17％ at 0.1% chitosan concentration. Molecular weights of the chitosans seemed not to affect antibacterial activities of chitosans. The antibacterial activity of the acid-soluble, 86%-deacetylated chitosan with 4 cps showed 98% of the ％ reduction at the level of 0.2％ chitosan. The ％ reduction of bacteria of this chitosan was higher at the higher concentration of acetic acid in the chitosan-bacterial mixture. The antibacterial activity was increased with the pH change over the range of 4.0 to 6.5. The 100% of the ％ reduction of bacteria was achieved within 4 hour incubation of the chitosan-bacterial mixture. According to the data obtained from the above experiments, the four chitosans among the six prepared in our laboratory were proved to be valuable for antibacterial textile finishing.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1167-1172
• /
• 2008

We investigated the glass transition temperatures ($T_g$) of dendrons consisting of conformationally mobile aliphatic polyether dendritic cores plus glassy peripheral polystyrenes (PSs), and linear PSs in the molecular weight range of 1000-8500 g/mol. We compared their $T_g$ behavior depending on their polymeric architecture. The linear PSs show a typical growth of $T_g$ up to 92.5 ${^{\circ}C}$ as the molecular weight increases to 8300 g/mol, while the dendrons display nearly constant $T_g$ values of 58-61 ${^{\circ}C}$, despite the increase of molecular weight with each generation. The striking contrast of Tg behavior would be mainly attributed to the fact that the dendrons keep the ratio of $N_e$/M ($N_e$: number of peripheral chain ends, M: molecular weight) over all the generations. Additionally, for the influence of dendritic spacers on glass transition temperature we prepared dimeric PSs with different linkage groups such as aliphatic ether, ester and amide bonds. We found that the dimer with the ether spacer exhibited the lowest glass transition at 55.4 ${^{\circ}C}$, while the amide linked dimer showed the highest glass transition temperature at 74.2 ${^{\circ}C}$. This indicates that the peripheral PS chains are effectively decoupled by the conformationally flexible ether spacer. The results from this study demonstrated that polymeric architecture and dendritic core structures play a crucial role in the determination of glass transition behavior, providing a strategy for the systematic engineering of polymer chain mobility.

• Korean journal of food and cookery science
• /
• v.23 no.2 s.98
• /
• pp.221-226
• /
• 2007

This study was carried out to investigate the optimun conditions for the isolation of low molecular weight peptides containing histidine, and to evaluate the antioxidant effects of skipjack boiled extracts(SBE). The results are summarized as follows : L-histidine contents of the ordinary muscle and dark muscle extracts were $ 83.1{\pm}1.75{\mu}M/g\;and\;11.0{\pm}2.39\;{\mu}M/g$, respectively. The L-histidine level of the dark muscle was much lower than that of ordinary muscle in the SBE. The extracts were treated with alcalase and neutrase under different pH levels, temperatures, and times. The optimum hydrolysis conditions of SBE were pH 7.0 and a $60^{\circ}$C temperature for 2 hr in the batch reactor, which hydrolyzed 63% of the SBE. HPLC analysis showed a removing effect of the ultrafiltration permeate (UFP) to high molecular weight impurities in SBE. SBE and pure carnosine participated as inhibiting agents to, which was confirmed through the autoxidation processing of linoleic acid. UFP treatment improved the inhibiting ability of SBE to the autoxidation of linoleic acid. The reducing power of the UFP-treated ordinary muscle extracts were 10-fold higher than the dark muscle extracts, and 0.7-fold higher than 20 mM pure carnosine. The UFP-treated ordinary muscle extracts had greater reducing power activity than pure carnosine. The scavenging activities on DPPH radical of the different treated-SBE and pure carnosine were also investigated. Scavenging activities of the ordinary and dark muscle extracts and the pure carnosine were 90%, 70%, and 45%, respectively. In summary, Skipjack boiled extracts (SBE) demonstrated that low molecular weight peptides containing histidine are capable of inhibiting lipid oxidation. They also possessed effective abilities as free radical scavengers and reducing agents, and these activities may increase with increasing concentrations.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.460-467
• /
• 2001

Inverse suspension polymerization of acrylamide (AM) in cyclohexane was carried out to study the effects of concentrations of sorbitan ester (Span) stabilizers and 2,2'-azobis (2-methyl propionamidine) dihydrochloride (AIBA) initiator, amount of monomer, shaking speed, and polymerization temperature on the particle size of the resulting poly (acrylamide) (PAM) beads and their molecular weights. It was found that the particle diameter. in general, decreased with increasing concentration of stabilizer, shaking speed, and water content in the aqueous phase, and with decreasing concentration of initiator and polymerization temperature. The average molecular weight of the resulting PAM beads was also found to increase with increasing concentrations of monomer and stabilizer, and also with decreasing concentration of initiator, polymerization temperature, and water content in the aqueous phase. In this study, PAM beads ranging 2 ~ 50 ${\mu}$m in diameter, with 8000000 ~ 12000000 in the weight average molecular weight were successfully prepared in almost 100% conversion.

• Archives of Pharmacal Research
• /
• v.26 no.10
• /
• pp.826-831
• /
• 2003

ADP-ribose pyrophosphatase (ADPRase) hydrolyzes ADP-ribose (ADPR) into AMP and ribose-5'-phosphate. It is classified into two groups, $Mg^{2+}$-dependent and $Mg^{2+}$-independent ADPRase, depending on its $Mg^{2+}$requirement. Here, we purified $Mg^{2+}$-dependent ADPRase from rabbit liver and examined what factors affect $Mg^{2+}$ requirement. The purified enzyme showed a single band with the molecular weight of 34 kDa on SDS-PAGE both in the presence and absence of 2-mercaptoethanol. The molecular weight of the native enzyme calculated by gel filtration was 68 kDa, indicating that ADPRase is a dimer made up of two identical subunits. $Mg^{2+}$-dependent ADPRase with the highest ADPR affinity had a $K_m$ of 160$\pm$10 $\mu$M and a pH optimum of around pH 9.5. Treatment of the purified ADPRase with heated cytosol fractions at 37$^{\circ}C$ for 3 h caused some changes in the chemical properties of the enzyme, including an increase in molecular weight, a decrease in solubility, and a loss of $Mg^{2+}$-dependency. The molecular weight of the cytosol-treated ADPRase measured by gel filtration was over 420 kDa, suggesting, for the first time, that ADPRase could be polymerized by undefined cytoplasmic factors, and that polymerization is accompanied by changes in the solubility and metal ion dependency of the enzyme.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.566-572
• /
• 2008

Polyethylene has been prepared via metallocene catalysts [(TMDS)$Cp_2$]$ZrCl_2$, 1, and [$(n-Bu)_2Cp_2$]$ZrCl_2$, 2, in the presence of hydrogen as a chain transfer reagent. Increase of hydrogen flow to the polymerization reactor resulted in the drop of catalytic activity, reduction of molecular weight of polyethylene, getting narrow of molecular weight distribution of polyethylene, and melting point of the polyethylene wax. It should be noticed that it was possible to control molecular weight down to 1500 and melting temperature to 60 $^\circ$C of polyethylene wax using the catalyst 1 that has been developed by authors as well as the catalyst 2 from Exxon.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.17
• /
• pp.7575-7582
• /
• 2015

Cyclin E, a key coordinator of the G1 to S transition in the cell cycle, may be deregulated in several malignancies, including breast cancer. The most significant aberration in cyclin E is its elastase mediated proteolytic cleavage into tumor specific low molecular weight isoforms (LMW-Es). LMW-Es are biochemically hyperactive and biologically drive tumorigenesis in transgenic mouse models. Additionally, expression of LMW-Es has been correlated with poor survival in breast cancer cases. Here we determine whether expression of LMW-Es in a breast cancer cell line that is naturally devoid of these deregulated forms would alter their progression through each phase of the cell cycle. The results revealed that LMW-Es expression resulted in an increased doubling time, concomitant with a predominant increase in the population in the S phase of the cell cycle. Moreover, downregulation of p53 in LMW-Es cells resulted in additional shortening of the doubling time and enrichment of cells in the S and G2/M phases of the cell cycle. Furthermore, expression of LMW-Es sensitized cells to ${\beta}$-estradiol (E2) mediated growth and changed expression patterns of estrogen receptor and Bcl-2. Intriguingly, expression of LMW-Es could surpass anti-apoptotic effects raised by p53 upregulation. Taken together these studies suggest that overexpression of LMW-Es in collaboration with p53 loss results in altered g rowth properties of MCF-7 cells, enhancing the oncogenic activity of these ER positive breast cancer cells.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.487-491
• /
• 1995

Effects of pH and molecular weight on the intrinsic viscosity of carboxymethyl chitin (CM-chitin) in dilute regime were studied. When the prepared CM-chitin was dissolved in 0.1M NaCl solution at $30^{\circ}C$, the intrinsic viscosity, molecular weight and degree of substitution of CM-chitin were 1.23dl/g, 15,500 and 0.62, respectively. The lower intrinsic viscosity $([\eta])$ of CM-chitin was showed at the lower pH than 7.0 and the higher pH (>7.0) did not result in any increase in intrinsic viscosity. Intrinsic viscosity decreased from 3.1dl/g to 2.55d1/g in water at $25^{\circ}C$ and from 15,500 to 12,600 as molecular weight for 20min of sonication treatment. The Mark-Houwink constant K and v of CM-chitin in water at $25^{\circ}C$ were $3.48\times10^-4$ and 0.94, respectively. So intrinsic viscosity could be expressed using molecular weight as followed equation; $[\eta]=3.48\times10^{-4}M^{0.94}$, consistent with random roil behaviour.

• Elastomers and Composites
• /
• v.34 no.2
• /
• pp.121-127
• /
• 1999

Characteristics of high molecular weight styrene-butadiene rubber(HM-SBR)/low molecular weight styrene-butadiene rubber(LM-SBR) mixtures were studied to investigate how to modify the processability and the mechanical properties of styrene-butadiene rubber (SBR). Mooney viscosity of the HM-SBR/LM-SBR mixtures and torque increase due to the vulcanization decreased by increasing the LM-SBR content of the mixtures. Shore A hardness and rebound properties were decreased by increasing the LM-SBR content of the mixtures. It was found that the value of tan ${\delta}$ of the mixtures in rubbery state was increased, while glass transition temperatures of the vulcanized blends were constant by increasing the LM-SBR content of the mixtures. It was postulated that the decrease of Mooney viscosity by increasing the LM-SBR content of the blends was due to plasticizing effects of the LM-SBR and the increased polydispersity of the mixtures. Change of mechanical properties of the vulcanized HM-SBR/LM-SBR mixtures was attributed to the decreased crosslink densities of the mixtures by increasing the LM-SBR content of the mixtures.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.127-131
• /
• 2007

Chronic treatment with olanzapine (OLZ), an atypical antipsychotic drug, is associated with the adverse effects of weight gain, hyperglycemia and/or hypertriglyceridemia. Green tea or epigallocatechin gallate (EGCG), one of the most abundant green tea polyphenols, significantly reduces or prevents an increase in glucose levels, lipid markers and/or body weight. We hypothesized that combined treatment with OLZ and green tea extract (GTE) or EGCG may prevent body weight gain and increase of the lipid markers. ICR male mice weighing an average of 30.51 g (n=32) at the beginning of the experiment were used. OLZ, OLZ+GTE and OLZ+EGCG were administered for 27 d in the drinking water, and then the levels of fasting glucose, nitric oxide (NO), and a typical lipid marker triglyceride (TG) were determined in plasma. The body weight and food intake were also compared. The chronic treatment of OLZ increased the average body weight compared with that of controls. In the presence of GTE or EGCG, the OLZ-induced increase in body weight was significantly prevented. Furthermore, in the OLZ group, the plasma levels of glucose, NO and TG were significantly increased, whereas GTE or EGCG prevented these increases. These results implicate that OLZ may induce systematic inflammatory reaction, and suggest that GTE or EGCG can protect against OLZinduced weight gain, hyperglycemia and hypertriglyceridemia.