• Elastomers and Composites
• /
• v.34 no.4
• /
• pp.292-298
• /
• 1999

Lactide oligomer with number averagae molecular weight of 460 was synthesized and reacted with poly(oxyteramethylene)glycol(PTMG, Mn = 650) to obtain oligolactide oligomer-terminated PTMG. Polyurethanes were synthesized from the oligolactide-terminated PTMG, 4,4'-diphenylmethane diisocyanate, and 1,4-butanediol. The mechanical and thermal properties of the polyurethanes and PTMG based polyurethane as control were measured by means of DSC and tensile tester. Degradation behavior of these polyurethanes put into a compost was evaluated by variation of mechanical properties, surface state, and weight loss. Modulus and weight significantly decreased with increasing time. The surface of the oligolactide polyurethane put into the compost during 6 weeks had a number of voids. On the other hand, These properties of the PTMG based polyurethane as control did not change. These results suggest that the novel polyurethanes incorporated oligolactide easily degrade under biodegradable condition.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.78-83
• /
• 2012

In this study, some experimental results of the peroxide-degradation process of polypropylene(PP) in a co-rotating twin-screw extruder to produce controlled rheology polypropylene(CRPP) are presented. The peroxide was dicumyl peroxide(DCP) and the concentration of DCP was in the range 0-0.3 wt%. It was found that the rheological properties of PP change significantly during reactive extrusion. Melt flow index(MFI) increased with DCP concentration. Intrinsic viscosity decreases with increasing DCP concentration. From dynamic rheological data, number average molecular weight(Mn), weight average molecular weight(Mn) and molecular weight distribution(MWD) were calculated. Results indicated that Mw decreases and MWD becomes narrower with increasing peroxide concentration. Especially, particle size distribution of CRPP decreases with increasing DCP concentration by chemical powdering process, and anti-slip floor paint, CRPP(DCP 0.2 wt%) powder by 10phr was friction coefficient 2.15 ${\mu}$, abrasion resistance 511.18%.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.928-933
• /
• 2001

Approximately 0.1 mg/ml of polyvinyl alcohol (PVA) was degraded by the growing cell, Brevibacillus laterospours, for 30 h, and 0.2 mg/ml of PVA was degraded by the cell-free extract that was isolated from Brevibacillus laterosporus. Approximately $0.29{\mu}g$/ml of acetic acid was produced from PVA by using the cell-free extract as a catalyst for 40 min. $V_{max}\;and\;K_m$ value of purified PAV-degradation enzyme was 3.75g/l and 2.75 g/l/min in reaction with EDTA and 3.99 g/l and 2.98 g/l/min in reaction without EDTA, respectively. Molecular weight of the purified enzyme determined by SDS-PAGE was 63,000 Da. Alcohol dehydrogenase and aldehyde dehydrogenase activities were qualitatively detected on a native acrylamide gel by an active staining method, indicating the existence of the metabolic pathway to use PVA as a substrate.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.866-868
• /
• 1998

Room temperature vulcanizing(RTV)silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water filming on the surface and thus to suppress the leakage current and consequent flashover. However, the electrical property and its hydrophobicity of RTV silicone rubber coating under outdoor conditions may be influenced by many environmental factors. In this study various treatments, such as salt-fog, salt water immerging and UV irradiation were applied to samples for investigation the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased as the degradation time longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight)silicone fluid diffused from the bulk to the surface.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.462-468
• /
• 1999

Room temperature vulcanizing (RTV) silicone rubber has been widely used to coat porcelain insulators to render water repellency to prevent formation of water film on the surface and thus to suppress the leakage current and consequently flashover. However, the electrical property and the hydrophobicity of RTV silicone rubber coating under outdoor condition may be influenced by many environmental factors. In this studyvarious treatments, such as salt-fog, salt water immerging and UV irradiation were applied to the samples to investigate the change of the electrical property and hydrophobicity. As a result the leakage current increased and contact angle decreased asthe degradation time is longer. But the degraded RTV silicone rubber has recovered its hydrophobicity during the drying time in ambient condition because LMW(Low Molecular Weight) silicone fluid diffused from the bulk to the surface.

• Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.54-61
• /
• 2005

Liquid-phase catalytic degradation of waste high-density polyethylene (HDPE) over ZSM-5 (powder type (PW)) and ZSM-5+binder (granule type (GR)) has been investigated with a stirred semi-batch operation at 400°C. Two ZSM-5 catalysts with a different crystal size were synthesized and also each ZSM-5 (25%) Catalyst was mixed with a same binder (kaolin: silica sol: alumina = 55%:10%:10%). The performance of prepared catalysts that has different physicochemical properties was discussed with the cumulative amount distribution, molecular weight distribution and also paraffin, olefin, naphthene and aromatic (PONA) distribution in liquid product. These liquid product quality and distributions were changed depending on the physicochemical properties of the catalyst. Moreover, the characteristic of ZSM-5 in the catalyst was strongly influenced on the activity and PONA distribution in liquid product.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.411-419
• /
• 2000

In this paper we have investigated the surface degradation by ultraviolet-irradiation in high-temperature vulcanized silicone rubber. Through the measurement of surface potential decay by corona-charging and of contact angle it is found that the change of surface electrostatic properties and the decrease of contact angle under UV-radiation. For the changes in micro-morphological and chemical structure of the UV-treated silicone rubber we utilized several analytical techniques such as SEM, ATR-FTIR,XPS. From this study it is shown that the chemical reactions(scissoring of side chain(S-$CH_3$) cross-linking and branching) occur on the surface of silicone rubber during the UV-irradiation. Also we obtained the results of the loss of low molecular weight chain by cross-linking and oxidation reaction.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.547-552
• /
• 2010

Biodegradable polymers have gained enormous attentions in the pharmaceutical and biomedical applications, especially in drug delivery. In this work, we report the synthesis and characteristics of high molecular weight polyoxalate with ~75000 Da. Hydrolytic degradation kinetics and degradation products were characterized by nuclear magnetic resonance and gel permeation chromatography. Polyoxalate is a semicrystalline and thermally stable polymer with a glass transition temperature of ${\sim}35^{\circ}C$, which is suitable for drug delivery applications. The hydrophobic nature of polyoxalate allows it to be formulated into nanoparticles and encapsulate drugs using a conventional oil-in-water emulsion/solvent displacement method. Polyoxalate nanoparticles also exhibited excellent cytotoxicity profiles. It can be suggested that polyoxalate has great potential for numerous biomedical and pharmaceutical applications.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.103-111
• /
• 2020

To compare the cleaning effect of solvents such as water and ethanol used to clean lacquer relics, the components extracted with various solvents were analyzed. A freshly dried lacquer sample and a lacquer sample exposed to ultraviolet radiation for 24 days were treated with water, ethanol, acetone, and hexane, and the dissolved material was detected by pyrolysis-gas chromatography-mass spectrometry. The amount extracted was significantly higher in acetone and ethanol than in hexane, a nonpolar solvent. Water, a highly polar solvent, was relatively efficient for extracting low-molecular-weight materials. After experiencing 24 days of ultraviolet radiation, the lacquer exhibited a significant increase of extracted materials compared with the nonexposed one. This may be due to the degradation of the urushiol chain in the form of polymers, resulting in the formation of low-molecular-weight polar substances, including dicarboxylic acids. In addition to the deterioration status of lacquer relics, such solvent extraction properties will be a crucial consideration in selecting the appropriate cleaning solvent.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.886-891
• /
• 2008

Contact glow discharge electrolysis(CGDE) is an unconventional electrolysis where plasma is sustained by D.C. glow discharge between an electrode and the surface of electrolyte surrounding it at high voltage. In this study, the behavior of CGDE in NaCl solution and the depolymerization of fucoidan by CGDE were investigated. After onset of CGDE, increase of voltage enhanced Glow discharge which resulted in low current density and low temperature in NaCl electrolyte. From the variation of molecular weight of fucoidan with the reaction time, it was demonstrated that the degradation of fucoidan followed a first-order rate law. Molecular weight of fucoidan treated with CGDE was about 40 times lower compared to initial fucoidan without content decrease of sulfate and fucos.