• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.834-841
• /
• 2005

Polyethylene glycol esters (PEG-esters) were synthesized by condensation reaction of dicarboxylic acid such as adipic acid and sebacic acid and several PEGs. The PEG-esters were analyzed by FT-IR, $^1H-NMR$ and HPLC for structure analysis, and by GPC for molecular weight. Through the analysis of surface tension, critical micelle concentration (CMC), aluminum contact angle of water solution containing the PEG-ester, the synthetic PEG-esters are proven to exhibit surfactant properties. The surface tension ranged from 45 to 50 dyn/cm depended on the concentration and structures of the PEG-esters. The surface tension of PEG-esters with sebacic acid moiety and short polyoxyethylene unit resulted in lower value than that of PEG-ester with adipic acid moiety and long polyoxyethylene unit. The CMC of water solution containing 2.5 wt% PEG-ester with sebacic acid moiety estimated at $0.9{\times}10^{-5}{\sim}5.3{\times}10^{-3}mol/L$ depended on the structures of PEG-esters. The CMC of PEG-esters with long polyoxyethlene unit showed a higher value than that of PEG-esters with short polyoxyethylene unit. Meanwhile, the CMC of PEG-esters with adipic acid moiety was not distinct due to their high hydrophilic character. As the results of contact angle and cutting time aginst aluminum, the contact angle ranged from $45^{\circ}$ to $53^{\circ}$ depended on the concentration of PEG-esters. The cutting time of aluminum showed the shortest value at CMC, but the longest value above CMC. This fact indicates that the CMC of PEG-esters is a very important factor in drilling aluminum.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2014

Nylon66 extrudates as a function of the extrusion number were prepared by a twin screw extruder. Chemical structures, thermal properties, melt index, crystal structures, mechanical properties such as the tensile strength, elongation at break and impact strength, and rheological property were measured by FT-IR, $^1H$-NMR, melt indexer, DSC, TGA, XRD, universal tensile tester, Izod impact tester, and rheometer. FT-IR and $^1H$-NMR characterizations indicated that the number of extrusions did not affect the chemical structure. The decrease in the molecular weight was checked by the melt index of extrudates. There were no effects of the thermal history on the melting and degradation temperature. The tensile and impact strength and modulus were found to be similar, regardless of the number of extrusions, but the elongation decreased significantly. The complex viscosity of extrudates at low frequencies decreased with the extrusion number. No structural changes after extrusion were confirmed from the fact that there was no change in the slope and shape of G'-G" plot.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.349-355
• /
• 2018

Ginsenoside Rg5, one of the protopanaxadiol ginsenosides of wood-cultivated ginseng, has been implicated in various diseases, such as diabetes, cancer, and hypertension; however, its angiogenic activity and molecular mechanisms have not yet been elucidated. Here, we found that wood-cultivated ginseng extract and ginsenoside Rg5 increase in vitro proliferation, migration, and tube-like structure formation, which are typical phenomena associated with angiogenesis, in cultured human umbilical vein endothelial cells (HUVECs). Moreover, Ginsenoside Rg5 stimulated the phosphorylation of Akt, endothelial nitric oxide (NO) synthase (eNOS), and extracellular-regulated kinase (ERK)1/2, which are well-known signal mediators of the angiogenic pathway. Furthermore, Ginsenoside Rg5 did not accelerate the activation of ICAM-1 and VCAM-1 which are inflammatory response mediators. These results suggest that wood-cultivated ginseng extract and ginsenoside Rg5 stimulated in vitro angiogenesis by activating the Akt/eNOS- and ERK1/2-dependent signal pathways without inducing vascular inflammation.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.169-178
• /
• 1996

Target parameters such as water solubility index (WSI), intrinsic viscosity (IV), water holding capacity (WHC), oil holding capacity (OHC), soluble dietary fiber (SDF) and microstructure were investigated on three different screw configurations during twin-screw extrusion of wheat bran. WSI of raw wheat bran (RWB) was 13.7%, while that of extrudates ranged $16.3{\sim}23.2%$ when extruded using screw configurations with 5 reverse screw elements (RSE). It was found that the moisture content of RWB greatly affected WSI of extrudates. IV of wheat bran extrudates increased from 10.6 ml/g of RWB to $37.86{\sim}44.37\;ml/g$ of extrudates extruded using 3, 4 and 5 RSE, whose trend was highly related to the moisture content of RWB and the extrusion pressure. Multiplication of IV and soluble solid (SS) content exhibited good correlation $(R^2=0.85)$ with specific mechanical energy (SME). The results suggested that SS and molecular size are an important factor governed by the SME in solubilization of wheat bran. WHC increased with increasing feed rate and moisture content, while OHC decreased. SDF increased from 2.68% of RWB to $4.32{\sim}6.48%$ of extruded wheat bran, indicating the significant breakdown of cell wall components. Microstructure of the extrudates showed the distinct patterns of degradation and solubilization of cell wall structure, depending on the moisture content of RWB.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.44-52
• /
• 1996

Sensory properties of cooked rice were affected by the varieties and growing environments of the rice. Moistness, cohesiveness, and adhesiveness of cooked rice were highly and positively correlated each other, whereas firmness was negatively correlated with these attributes. Sixty rice samples which differed in varieties and/or growing environments were divided into four groups based on their textural properties through principal component analysis and cluster analysis. Quality type I showed the highest values for moistness, cohesiveness, and adhesiveness, and the lowest values for firmness of cooked rice. On the other hand, quality type IV showed just the opposite values. There was no significant difference among rice starches in amylose content (P<0.05). A17 (type III) and A09 (type IV) had higher blue values for starch and amylopectin than the other samples (type I and II). On the amylogram, these samples showed lower values for breakdown and higher values for setback than the other samples. Average degree of polymerization, average chain length, and average number of chains for amylose and amylopectin were 597-878 and 2660-3140, 140-230 and 17-19, and 3.1-4.9 and 140-170, respectively.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.30-40
• /
• 2012

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace oxidizing slag to concrete aggregates(EFS). In this study, Electric arc furnace oxidizing slag is used in the PRCC(Polymer Rapid setting Cement Concrete) which is applied a bridge pavement of rehabilitation, largely. The results showed that the increment of compressive strength development by 10- 20%. The flexural strength of EFS-Con increased greatly as the electric arc furnace oxidizing slag changed. The compressive strength and flexural strength developed enough for opening the overlayed EFS-Con to the traffic after 4 hours of EFS-Con placement. The permeability of EFS-Con was evaluated as negligible due to its very low charge passed. Thus, EFS-Con could be used at repairing or overlaying the concrete at fast-track job sites.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.504-509
• /
• 1989

The effect of oxygen-deficiency on the charge distributions and orbital energies for small copper oxide clusters representing the superconducting materials $YBa_2Cu_3O_x (6{\leq}x{\leq}7)$ were investigated by the extended Huckel molecular orbital (EHMO) method with the tight-binding model. Our calculations show +3 oxidation state of Cu(1) in the $CuO_3$ chain and +2 or +1 of Cu(2) in the $CuO_2$ layers for $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 (or +5), while for $YBa_2Cu_3O_6$ +1 oxidation state of Cu(1) and +3 (or +2) of Cu(2) in the $CuO_2$ layers with the nominal charge of $Cu_3$ = +7 (or +5). For $Cu_3O_{12}$ cluster representing $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 the Cu(2) $d_{{x^2}-{y^2}}$ orbitals in the $CuO_2$ layers is a typical Jahn-Teller $d^9$ system with the partial hole and the Cu(1) $d_{{_z2}-{_y2}}$ orbital in the $CuO_3$ chain contains hole occupancy. For $Cu_3O_{10}$ cluster representing $YBa_2Cu_3O_6$ with the nominal charge of Cu = +5 the orbital character of the highest partially occupied MO (HPOMO) and the lowest completely unoccupied MO (LCUMO) of $Cu_3O_{12}$ representing $YBa_2Cu_3O_7$ with the nominal charge of $Cu_3$ = +7 is reversed, and the character of Cu(1) $d{{x^2}-{y^2}}$ orbital of LCUMO of the $Cu_3O_{12} $cluster is vanished. It is suggested that the local crystal field environment of Cu(1) by the oxygens in the Cu(1) chain may play a vital role in conductivity and superconductivity, either alone or through cooperative electronic coupling with the Cu(2) layers in $YBa_2Cu_3O_7.$.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.76-81
• /
• 2012

Silk protein has been explored to be used for biomedical applications for several decades. However, it has not been used in this field cause to their irreversible crystallization after dissolving in water. The existing methods of silk protein hydrolysis using silkworm cocoon were used with harmful solvents and through a very complicated process. Therefore, we have developed novel methods for the production of water-soluble hydrolysate using silkworm gland. We manufactured two types of silkworm gland-derived hydrolysate (water-soluble SGH, SSGH; total SGH, TSGH) and compared the characteristics with commercial cocoon-derived sericin hydrolysate (CSH). The molecular weight of SGH ranged from 7 to 50 kDa (SSGH) and 5 to 15 kDa (TSGH) within glycine, alanine, and aspartic acid as a main amino acid composition. In contrast, CSH ranged from 15 to 50 kDa within serine and aspartic acid. The results of FTIR implied that SGH was more soluble form than CSH, as shown by the decrease in the ${\beta}$-sheet structure at $1630cm^{-1}$ on amide I peak. In comparison with 10% fetal bovine serum, 0.1% (1 mg/ml) SSGH had equivalent effect on the proliferation of human dermal fibroblasts and mesenchymal stem cells. All results of the SSGH made by novel manufacturing process indicate the SSGH is more preferable as a culture medium supplement than cocoon-derived sericin.

• Korean Chemical Engineering Research
• /
• v.57 no.4
• /
• pp.445-454
• /
• 2019

Layered double hydroxides (LDHs) nanoparticles have emerged as novel nanomaterials for bio-imaging applications due to its unique layered structure, physicochemical properties, and good biocompatibility. Bio-imaging is one of the most important fields for medical applications in clinical diagnostics and therapeutics of various diseases. Enhanced diagnostic techniques are needed to realize new paradigm for next-generation personalized medicine through nanoscale materials. When nanotechnology is introduced into bio-imaging system, nanoparticle probes can endow imaging techniques with enhanced ability to obtain information about biological system at the molecular level. In this review, we summarize structural features of LDH nanoparticles with current issues of bio-imaging system. LDH nanoparticle probes are also discussed through in vitro as well as in vivo studies in various bio-imaging techniques including fluorescence imaging, magnetic resonance imaging (MRI), positron emission tomography (PET), and computed X-ray tomography (CT), which will have the potential in the development of the advanced nanoparticles with high sensitivity and selectivity.

• Membrane Journal
• /
• v.29 no.4
• /
• pp.223-230
• /
• 2019

In this paper, we develop a polymeric blend membrane based on $CO_2$-philic poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethyl methacrylate)-poly(oxyethylene methacrylate) (PBEM-POEM) comb copolymer, which was synthesized by facile free radical polymerization. The PBEM-POEM (PBE) comb copolymer was blended with a commercial oligomer, low-molecular-weight poly(ethylene glycol) (PEG, $M_w=200gmol^{-1}$) with various ratios to prepare $CO_2/N_2$ separation membranes. From the result of $CO_2/N_2$ separation test of the PBE/PEG blend membranes with the various PEG contents, we could conclude that with increasing PEG content, the $CO_2/N_2$ selectivity significantly increased while the CO2 permeability decreased showing trade-off relationship. However, when comparing the performance of the PBE/PEG (9 : 1) with the PBE/PEG (7 : 3) membrane, the $CO_2$ permeance decreased by only 8.3%, while the $N_2$ permeance decreased by 69.1%. Therefore, the $CO_2/N_2$ selectivity dramatically increased from 33.8 to 100.3. This could be because the POEM chains, which account for 80% of the PBE copolymer, favorably interact with PEG and lead to a more compact chain structure, which was confirmed by FT-IR, XRD and SEM analysis. The PBE/PEG (7 : 3) blend membrane had the most optimal gas separation performance, showing a $CO_2$ permeance of 170.5 GPU and $CO_2/N_2$ selectivity of 100.3.