• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.433-433
• /
• 2011

Since the concept of graphene was established, it has been intensively investigated by researchers. The unique characteristics of graphene have been reported, the graphene attracted a lot of attention for material overcomes the limitations of existing semiconductor materials. Because of these trends, economical fabrication technique is becoming more and more important topic. Especially, the epitaxial growth method by sublimating the silicon atoms on Silicon carbide (SiC) substrate have been reported on the mass production of high quality graphene sheets. Although SiC exists in a variety of polytypes, the 3C-SiC polytypes is the only polytype that grows directly on Si substrate. To practical use of graphene for electronic devices, the technique, forming the graphene on 3C-SiC(111)/Si structure, is much helpful technique. In this paper, we report on the growth of graphene on 3C-SiC(111) surface. To investigate the morphology of formed graphene on the 3C-SiC(111) surface, the radial distribution function (RDF) was calculated using molecular dynamics (MD) simulation. Through the comparison between the kinetic energies and the diffusion energy barrier of surface carbon atoms, we successfully determined that the graphitization strongly depends on temperature. This graphitization occurs above the annealing temperature of 1500K, and is also closely related to the behavior of carbon atoms on SiC surface. By analyzing the results, we found that the diffusion energy barrier is the key parameter of graphene growth on SiC surface.

• Food Science and Biotechnology
• /
• v.16 no.2
• /
• pp.270-274
• /
• 2007

To characterize the polysaccharides which exist as soluble forms in fruit wines, crude polysaccharides were isolated from red, white, raspberry, wild grape, and pear wine, respectively. Among them, the crude polysaccharide (RW-0) in red wine showed the highest yield and considerable amounts of thiobarbituric acid (TBA)-positive materials. The pectic polysaccharide RW-2 was purified to homogeneity from RW-0 by subsequent size-exclusion chromatography using Sephadex G-75 and its structure was characterized. RW-2 consisted of 14 different monosaccharides which included rarely observed sugars in general polysaccharides, such as 2-O-methyl-fucose, 2-O-methyl-xylose, apiose (Api), 3-C-carboxy-5-deoxy-L-xylose (aceric acid, AceA), 3-deoxy-D-manno-2-octulosonic acid (Kdo), and 3-deoxy-D-lyxo-2-heptulosaric acid (Dha). Methylation analysis indicated that RW-2 comprised at least 20 different glycosyl linkages such as 3,4-linked fucose, 2,3,4-linked rhamnose, 3'-linked apiose, and 2,3,3'-linked apiose, being characteristic in rhamnogalacturonan II (RG-II). High performance size-exclusion chromatography indicated that RW-2 mainly comprised RG-II of higher molecular weight (12,000), and that the changes of molecular weight to apparent 7,000 under less than pH 2.0 were observed. These analyses indicated that the higher molecular weight polysaccharide in RW-2 was mainly present as a RG-II dimer.

• YAKHAK HOEJI
• /
• v.45 no.6
• /
• pp.623-633
• /
• 2001

Various bupivacaine-loaded microspheres were prepared using poly(d,1-lactide) (PLA) and poly(d,1-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. The effects of process conditions such as drug loading, polymer type and solvent type on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency and yield of PLGA micro- spheres were higher than those of PLA microspheres. The prepared microspheres had an average particle size below 5${\mu}{\textrm}{m}$. The particle size range of microspheres was 1.65~2.24${\mu}{\textrm}{m}$. As a result of SEM, the particle size of PLA microspheres was smaller than that of PLGA microspheres. In morphology studies, microspheres showed a spherical shape and smooth surface in all process conditions. In thermal analysis, bupivacaine-loaded microspheres showed no peaks originating from bupivacaine. This suggested that bupivacaine base was molecular-dispersed in the polymer matrix of microspheres. The release pattern of the drug from microspheres was evaluated for 96 hours. The initial burst release of bupivacaine base decreased with increasing the molecular weight of PLGA, and the drug from microspheres released slowly. In conclusion, bupivacaine-loaded microspheres were successfully prepared from poly(d,1-lactide) and poly (d,1- lactic-co-glycolide) polymers with different molecular weights allowing control of the release rate.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.357-360
• /
• 2004

We developed in the present study molecular imprinted polymers (MIPs), using single templates (pentoxifylline, caffeine and theophylline) and mixed-templates (pentoxifylline-caffeine, pentoxifylline-theophylline and caffeine-theophylline). The MIPs were prepared with methacrylic acid (MAA) as the monomer, ethylene glycol dimetharylate (EGDMA) as the crosslinker and 2,2'-azobis(isobutyronitrile) (AIBN) as the initiator. The obtained polymer particles (particle size after grinding was about 25-35 ${\mu}$m) were packed into a HPLC column (3.9 mm i.d. ${\times}$ 150 mm). The selectivity and chromatographic characteristics of the MIPs were studied using acetonitrile as the mobile phase at a flow rate of 0.8 mL/min. UV detector wavelength was set at 270 nm. Different single template MIPs showed different molecular recognitions to the templates and the structurally analogues, according to the rigidity and steric hindrance of the compounds. Recognition was improved on the mixed-template MIPs as a result of the cooperation or sum effect of the templates, whereas on the pentoxifylline-theophylline imprinted polymer, the highest selectivity and affinity were obtained. Separations of the test compounds on different polymers were also investigated.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.512-518
• /
• 2004

We have synthesized a novel macromonomer of vinyl-terminated bifunctional polyurethane having a molecular weight of 37,000 g/mol and successfully applied it to the dispersion polymerization of methylmethacrylate(MMA). We verified the presence of the vinyl terminal group and the macromonomer grafted onto the poly(ethylene glycol)(PEG) block in the PMMA particles by using $^1$H and $\^$13/C NMR spectroscopies. Monodisperse PMMA microspheres that have good uniformity of 1.01 were prepared at 20 wt% macromonomer content; we investigated the characteristics of the PMMA particles in terms of their molecular weight, molecular weight distribution, size of the particles, thermal properties, and glass transition temperature. We have found that the synthesized polyurethane macromonomer is an effective stabilizer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E2
• /
• pp.89-97
• /
• 2003

Ambient polycyclic aromatic hydrocarbons (PAHs) were measured during the winter and summer of 2002 in Chongju. A filter pack and polyurethane foam (PUF) system was employed to collect simultaneously the particulate and gas phase PAHs. The samples were then analyzed using a gas chromatograph equipped with mass spectrometer detectors (GC/MSD). A total of 29 samples were collected and 11 PAH species were identified. The lower molecular weight PAH compounds (3∼4 rings) dominated the total PAH mass. The higher molecular weight PAH compounds (5∼6 rings) were less abundant. The PAHs were showed to exhibit seasonal variations. The concentrations of all com-pounds were significantly higher in winter than summer. The lower molecular weight PAHs were mostly found in the gas phase whereas the heavier ones were mainly associated with particulate phase. Vehicle emissions are likely to be the primary contributor of PAHs in Chongju. This study also demonstrated that it is necessary to perform simultaneously particulate and gas phase measurements to determine the accurate concentrations of ambient PAHs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.10
• /
• pp.828-833
• /
• 2000

Growth characteristics and microstructure of AIN thin films grown by plasma assisted molecular beam epitaxy on Si substrates have been investigated. Growing temperature and substrate orientation were chosen as major variables of the experiment. Reflection high energy electron diffraction (RHEED), X-ray diffraction (XRD), atomic force microscopy (AFM) and transmission electron microscopy/diffraction (TEM/TED) techniques were employed to characterize the micorstructure of the films. On Si(100) substrates, AlN thin films were grown along the hexagonal c-axis preferred orientation at temperature range 850-90$0^{\circ}C$. However on Si(111), the AlN films were epitaxially grown with directional coherency in AlN(0001)/Si(111), AlN(1100)/Si(110), and AlN(1120)/Si(112) at 85$0^{\circ}C$ and the epitaxial coherencry seemed to be slightly distorted with increasing temperature. The microstructure of AlN thin films on Si(111) substrates showed that the films include a lot of crystal defects and there exist micro-gaps among the columns.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1724-1726
• /
• 2000

We have investigated a molecular orientation effect of septithiophene(7T), the conjugated linear septenary of thiophene, on its optical and electrical properties. Vacuum evaporation of septithiophene on a substrate induces a upright orientation. We rubbed the pre-layer to lie down molecules. As a result, we could get a horizontal molecular orientation. Dichroic ratio is about 2 at 418nm from UV/visible absorption spectrum. To investigate the electrical characteristics, we fabricated devices with septithiophene as a semiconducting material. The conductivity with horizontal septithiophene orientation is about one order gloater than that of upright septithiophene.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.76-87
• /
• 1994

High density lipophorin-L (HDLP-L) was purified from the hemolymph of Bombyx modi using KBr density gradient ultracentrifugation and gel permeation chromatographv (Sephadex G-2001. Lipophorin has native molecular weight of 730 Nd and consists of Apo-Lp I and Apo-Lp II with molecular weights of 250 Kd and 90 Kd, respectively. Lp contains large amounts of glutamine & glutamic acid, threonine, leucine but small amounts of cysteic acid & oxidized cystine, tyrosine, methionine. Lp also contains diacylglycerol, cholesterol, phosphatidylcholine, and phosphatidylethanolamine. Anti-lipophorin showed positive reaction with fat body and ovarial extracts and also revealed immunological identity with lipophorin of Fall webworm, Hyphantria cunea. Lipophorin maintains constant level during larval and pupal stapes but greatlv increases during adult stage in both male and female. Apo-Lp III was purified from adult hemolymph. Hemolymph was subjected to KBr ultracentrifusation and Lp-free fraction was submitted to cation exchange chromatosraphy after ammonium sulfate precipitation. Apo-Lp III has molecular weight of 17 Kd, and similar amino acid composition ar those of other species Lp but contains high amounts of tryptophan which other are tacking in.

• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.27-33
• /
• 2006

Infrared color-color diagram of 10 giant molecular clouds are examined to explore the dust property from the COBE Diffuse Infrared Background Experiment of the 100, 140, and $240{\mu}m$ emission. Four of them, Taurus, Mon OB1, Gem OB1, and Chameleon, show the anti-correlation in $R_{100/140}-R_{140/240}$ plot and the horizontal distribution in $R_{100/240}-R_{140/240}$ plot, which disagree with those of theoretical calculation. These could be explained by the depletion of $100{\mu}m$ and the excess of $140{\mu}m$ emission, though no existing dust model could support them. Mean color temperature of the anti-correlation region appears to be lower than that of the linear region, whose temperatures are 15.3, 17.0 K, respectively. And the linear region shows large dispersion in the plot of intensity relation. Both imply that a star formation would be more active, but not homogeneous, in the linear region compared to the anti-correlation region.