• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.32-39
• /
• 1995

The design of injection molded polymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. An interactive computer-based design system is developed in order to realize the concept of rational design for the productivity and quality of mold making. The knowledge-based CAD system is constructed by adding the knowledge -base module for mold feature synthesis and appropriate CAE programs for mold design analysis in order to provide designers, at the initial design stage, with comprehensive process knowledge for feature synthesis, performance analysis and feature-based geometric modeling. A knowledge-based CAD system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.186-193
• /
• 2009

본 논문에서는 전열(마이크로 히터, 센서)을 이용해 금형의 표면을 가열하는 E-MOLD 특허기술을 적용하여 휴대전화용 복합기능 도광판(Prismless LGP)을 제작하고, 전사성을 평가하였다. 이를 위하여 MEMS 공정을 이용하여 복합기능 도광판용 니켈 스탬퍼를 제작하였고, E-MOLD 기술의 핵심인 이동가열코어(movable heated core)가 설치된 금형을 설계, 제작하였다 이를 이용하여 성형조건 중 금형온도를 변화시키면서 복합기능 도광판을 사출성형으로 제조 하였고, 금형온도가 성형품의 전사성에 미치는 영향에 대하여 알아보았다. 또한, 전산모사 프로그램(CAE)을 이용하여 금형온도와 사출시간에 따른 수지의 유동성을 해석하였다. 금형온도에 따른 도광판의 전사성은 $100^{\circ}C$(25.0nm), $140^{\circ}C$(48.4nm), $180^{\circ}C$(52.1nm)로 나타났고, 스탬퍼(52.1nm)와 비교했을 때 $180^{\circ}C$에서 전사성이 가장 우수했다. 전산모사 해석결과에 따르면, 수지의 유동성은 금형온도($50{\sim}180^{\circ}C$)가 증가할수록 향상되었다. 사출시($1{\sim}2sec$)이 길수록 유동성이 감소하는 경향을 $160^{\circ}C$에서 확인하였다. 따라서 수지의 전사성과 유동성은 금형온도에 따라 증가하고, 특히 유리전이 온도($140^{\circ}C$) 이상에서 크게 상승하였다.

• Composites Research
• /
• 제12권5호
• /
• pp.31-39
• /
• 1999

최근에 플라스틱 복합재료는 고강도, 초경량이라는 재료의 우수한 성질과 높은 생산성으로 인해서 그 활용도가 급속히 증가하고 있고, 그 중 섬유강호 플라스틱 복합재료는 가장 각광받는 재료중 하나이다. 본 연구에서는 연속섬유강화 플라스틱 복합재료를 열간 압축성형법을 이용하여 성형조건을 변화시켜 성형한 후 성형품의 성형성에 대하여 연구하였다. 연속섬유강화 플라스틱 복합재료를 압축 성형할 때 발생하는 문제점은 유동 속도차에 의한 섬유와 모재간의 분리현상이다. 이 분리현상으로 인해 성형품은 불균질해지고 이방성이 되어 기계적 특성 등에 영향을 받는다. 그러므로 분리에 영향을 미치는 섬유구조 및 기하하적 형상 등 성형조건을 연구할 필요가 있다. 니들펀칭 횟수 NP=0 punches/$\textrm{cm}^2$인 경우 성형시 모재와 강화재간의 분리현상이 증가하여 성형품의 성형성에 큰 영향을 미친다. 또한 펀치의 반경 rp=1mm일 경우 압축성형에 의한 큰 형상변화에 의하여 역시 분리현상이 증가한다. 본 논문에서는 성형공정 인자들이 제품의 성형성에 어떠한 영향을 미치는지 알아보기 위하여 연속섬유강화 플라스틱 복합재료를 니들펀칭 횟수를 변화시켜 복합판을 제작한 후, 펀치의 반경을 변화시켜 고온 압축성형 하였을 때 일어나는 불균질도와 성형품의 두께를 측정하여 비교하고, 이에 미치는 금형 코너부의 반경 및 니들펀칭 횟수의 영향에 대해서 검토한 결과를 보고한다.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.1933-1947
• /
• 1991

본 연구에서는 특징형상기반 CAD 시스템의 기계가공을 고려한 기하학적 모델 링 기능과 부형상의 합성과 해석을 위한 사출성형에 관한 광범위한 지식을 연계, 종합 한 형태의 지식형 CAD 시스템을 제안하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.105-108
• /
• 2006

The fuel cell is one of the promising environment-friendly energy sources for the next generation. The fuel cell provides good energy efficiency above 40% without pollution or noise. Different fuel cell types are usually distinguished by the kind of electrolyte. Among these, the proton exchange membrane fuel cell (PEMFC) has advantages of high power density. low operating temperature, relatively quick start-up, and rapid response to varying loads. The bipolar plate is a major component of the PEM fuel cell stack, and it takes a large portion of stack volume, weight and cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding and by machining. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. Flow channels were fabricated by compression molding with design of experiments (DOE) to evaluate moldability. The cost for compression molding of graphite-composite bipolar plate was compared with machining cost to make the same bipolar plate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.113-116
• /
• 2006

Some nano hair systems in the nature are found to show excellent adhesive characteristic, which is called dry adhesive, and synthetic nano hairs to mimic these adhesiveness are believed to have many applications. To develop a practical synthetic dry adhesive system, we mold nano hairs on plastic substrates using thermoplstic materials including COC, PP, PC and PMMA. and estimate the moldability and the adhesive characteristic. As a template for molding nano hairs, AAO membrane is first adopted, which is 60um thick and 13mm in diameter. This membrane has about a billion of through-holes of which diameter is around 200nm. This AAO membrane and the pellet of materials are stacked in the mold and pressed to mold after heating up to be melted. The AAO membrane is removed using KOH to obtain the molded nano hairs. As a result, the diameter of the molded hairs is around 200nm and the length is $2um{\sim}60um$ depending on the molding conditions and materials. The molded nano hair substrates is estimated to show much better adhesive characteristic than a substrate without nano hairs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권1호
• /
• pp.49-52
• /
• 2002

Short shot is a molded part that is incomplete since insufficient material was injected into the mold. Remedial actions to solve short shot can be dune by injection molding experts based on their empirical knowledge. Modifying mold and part, changing resin to less viscous one, and adjusting process conditions are general remedies. Experts of injection molding might try to adjust process conditions such as mold temperature, melt temperature, injection time based on their empirical knowledge as the first remedy because adjustment of process conditions is the most economic way in time and cost. However it is difficult to find appropriate process conditions as they are highly coupled and there are so many elements to be considered. In this paper, a fuzzy logic algorithm has been proposed to find an appropriate mold temperature. With the percentage of the insufficient quantity of an injection molded part, an appropriate mold temperature can be obtained by the fuzzy logic algorithm.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.192-203
• /
• 2001

The design of gate and runner(delivery system) is one of the most important subject in injection molding. Delivery system is a channel to flow the polymer melt from the injection molding machine to the mold cavities. Also, delivery system affect quality and productivity of the part. The synthesis of delivery system of injection molding has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through the current CAD systems. GATEWAY is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate the acceptable geometries of gate and runner far injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, GATEWAY, to an existing geometric modeler. A knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design of injection molding.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.179-185
• /
• 2000

The purpose of this study was to develop an osteogenic, biodegradable material using polymer and BMP. It was designed to have structural function and be moldable, for the reconstruction of load bearing areas and deformities of various configurations. Bone apatite was added to Poly(L-lactide)(PLLA) and made porous for osteoconductability and ease of BMP loading. The materials, with or without BMP purified from porcine bone matrix, were evaluated in cranial bone defect models in rats for biocompatibility and bone regeneration capability. The following results were obtained: The PLLA-BMP material with BMP added to the polymer showed 30% healing of cranial bone defects in rats during the 2 weeks to 3 months period of observation. The moldable PLLA agent without BMP also showed 25% bone healing capacity. Although new bone formation was incomplete in the critical size defect of rat cranium, it can be concluded that the unique moldability of those agents makes them useful for the reconstruction of various bone defects and maxillofacial deformities.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.1-7
• /
• 2016

De Stijl in order to began in the Netherlands in 1917 is an art movement that becomes the theoretical background of modernism design was the foundation geometric abstraction. Steel design for that they offered a new paradigm at that time art, in various fields such as industrial design is still applied, especially works of De Stijl in the design area of urniture it became the beginning of the modern furniture. The starting point of this study is to analyze the two-dimensional representation characteristics to understand the background of the formation with the basic concepts of De Stijl. Therefore the generation of the surface to be displayed in the work of De Stijl and to analyze the divided element, and not if learn their expression characteristics. Also the line and the plane of the two-dimensional modeling properties of De Stijl, after described colors, and studied the characteristics of De Stjil writers for typical analyzes the moldability shown in their work, which based on, we try to present a new representation technique.