• 대한소아치과학회지
• /
• 제44권4호
• /
• pp.446-454
• /
• 2017

최근 개발된 bulk-fill 복합레진에 대한 연구가 많이 이루어지고 있지만 소아환자 치료에 사용할 수 있는 적절한 재료인지에 대한 연구는 부족한 실정이다. 따라서 본 연구의 목적은 유구치의 2급 와동에서 bulk-fill 복합레진과 전통적 복합레진의 와동 적합성을 비교 평가하는 것이다. 발치 된 80개의 유구치의 근심 또는 원심에 2급 와동을 형성한 후 4개의 군으로 무작위로 나누었다. 대조군은 전통적 복합레진인 Filtek$^{TM}$ Z-350 XT(FZ)으로 수복하고 나머지 3개의 군은 bulk-fill 복합레진인 Filtek$^{TM}$ Bulk Fill Posterior Restorative(FB), Tetric N-Ceram$^{(R)}$ BulkFill(TNC)과 Filtek$^{TM}$ Bulk Fill Flowable Restorative(FBF)으로 수복하였다. 모든 시편을 열순환 시행한 후 50% 질산은($AgNO_3$)용액에 침적시켰다. Micro-CT를 이용하여 전체 질산은의 침투 부피와 치경부의 변연누출 정도를 측정하였고 기포의 개수, 크기, 위치를 평가하였다. 질산은의 침투 부피에서 FB가 FZ보다 유의하게 낮은 값을 보였고(p < 0.05), TNC와 FBF는 FZ와 비슷한 값을 보였다. 치경부 부분의 변연누출 정도는 FBF가 FZ와 FB보다 유의하게 낮은 값을 보였다(p < 0.05). 기포의 개수와 크기는 4개 군 모두 유의한 차이가 없었으나 기포의 위치는 전통적 복합레진에서는 전체 기포의 83.3%가 수복물 내부에 분포하였고, bulk-fill 복합레진에서는 치은축면 선각에 많이 분포하였다. 유구치 2급 와동에서 bulk-fill 복합레진과 전통적 복합레진의 와동에 대한 적합성은 유사한 결과를 보여주었다. 따라서 소아의 치아우식증 수복치료 시 bulk-fill 복합레진이 유용하게 사용될 수 있을 것으로 보인다.

• Restorative Dentistry and Endodontics
• /
• 제30권2호
• /
• pp.112-120
• /
• 2005

본 연구에서는 수복면의 위치와 와동의 크기에 따른 미세누출도의 차이를 확인하기 위해 3차원 재구성법에 의한 색소침투량과 주사전자현미경 검경을 통한 변연틈새의 비율을 측정하였다. 32개의 건전한 대구치의 협/설면과 인접면에 각기 $2\;{\times}\;2\;{\times}\;1.5\;mm$의 작은 와동과 $4\;{\times}\;2\;{\times}\;1.5\;mm$크기의 큰 5급 와동을 형성 한 다음, 자가부식형 접착시스템으로 치면 처리하고 혼합형 복합레진인 Esthet X로 단일 충전하였다. 5도와 55도 사이에서 1000회의 열순환을 시킨 다음, 레진 복제물을 제작하고 SEM 검경을 통해 전체 변연길이에 대한 변연틈새의 비율을 측정하였다. 또한 열순환된 치아에 $50\%$ 질산은 용액으로 색소를 침투시킨 후 자가중합형 레진에 포매하여 0.25 mm두께의 간격으로 연속적으로 갈아내면서 각각의 단면상을 채득하였다. 각 단면상을 3차원으로 재구성하여 미세누출도를 정량적으로 평가하였다. 3차원 색소 침투량의 유의성 검정에는 Two-way ANOVA와 independent T-test를, 변연틈새의 비율에는 Mann-Whitney U test를 사용하였으며 , 두 방법 사이의 Spearman's rho test로 평가하여 다음과 같은 결과를 얻었다. 1 미세누출도는 수복면의 위치와 와동의 크기에 의해 영향을 받았다. 즉 협/설면과 작은 와동보다는 인접면과 큰 와동에서 더 많은 미세누출을 보였다. 2. 두 방법 사이에는 높은 상관 관계를 보였다 (상관계수 = 0.614/P= 0.000). 이상의 연구 결과로 볼 때, 협/설면과 작은 와동의 수복물보다는 인접면과 큰 와동의 수복물에서 더 많은 미세누출을 보였으므로, 불필요한 치질 삭제를 줄임으로써 변연부의 노출이 커지는 것을 막아야 할 것이다.n-St/SS 군에서는 비표준화 medium 규격 master cone과 스테인레스 스틸 spreader를, 그리고 Non-St/NT 군에서는 비표준화 medium 크기 master cone과 니켈-티타늄 finger spreader를 각각 사용하였다. 충전된 근관은 $37^{\circ}C$, 상대습도 $100\%$하에서 24시간 보관한 후, 치근단 1, 3및 5 mm수준에서 횡절단하여 입체현미경 하에서 관찰하고 컴퓨터에 저장한 다음, $Auto^{(R)}$CAD 2000 프로그램을 이용하여, 형성된 근관 및 gutta-percha 충전물의 외형을 추적하여 근관내 gutta-percha 면적비를 계산하였다. Gutta-percha 면적비의 결과치는 two-way ANOVA를, 그리고 accessory cone 수는 one-way ANOVA 및 Duncan's multiple range test를 이용하여 통계 분석하여 다음과 같은 결과를 얻었다. 스테인레스 스틸 finger spreader를 사용한 경우 및 니켈-티타늄 finger spreader를 사용한 경우 공히, 모든 치근단 수준에서 비표준화 medium 크기 master cone 사용군이 ISO 표준화 규격의 master cone 사용군에 비해 유의하게 높은 gutta-percha 면적비를 나타내었다 (p < 0.01). 비표준화 medium크기 master cone 사용군에서는 표준화 규격의 master cone 사용군에 비해 유의하게 적은 수의 accessory cone이 사용되었다 (p < 0.01). 대학생간에는 유의한 차이(p<0.05)가 인정되었다. 응답자의 체형은 ${\ulcorner}$적당하다${\lrcorner}$고 응답한 경우가 가장 많이 이러한 음식을 즐겨 먹었으며(49.5%), 그

• 대한치과보철학회지
• /
• 제62권3호
• /
• pp.215-223
• /
• 2024

본 증례의 환자는 기존 의치에 불편함을 느껴 새로운 의치를 원하여 내원하였다. 하악 좌측 제2대구치를 제외한 모든 치아를 상실한 상태였다. 환자의 나이가 65세였기에 임플란트와 의치를 국민건강보험 제도를 이용하여 치료할 수 있었고, 환자는 하악에 임플란트를 이용한 의치 제작을 원하였다. 새 의치에 적응하기 위해 임시 의치를 제작하여 장착하고 충분한 적응 기간을 거쳐서 치료를 진행하였다. 상악은 총의치, 하악은 전방부에 임플란트 2개를 식립하여 임플란트 상부 보철물을 서베이드 크라운 형태로 제작하고 임플란트 보조국소의치를 제작하였다. 골흡수가 심한 하악 소수 잔존치 상태에서 효율적인 치료 비용과 기능적으로 환자와 술자 모두 만족하였다. 임플란트 상부 보철물을 서베이드 크라운 형태로 제작한 임플란트 보조 국소의치는 경제적, 해부학적인 한계로 총의치, 임플란트 피개의치, 임플란트 지지 완전 고정성 보철이 어려운 경우에 효과적인 대안이 될 수 있다. 그러나 과학적으로 근거가 높은 수준의 연구가 부족하여 향후 면밀한 정기검진 및 교합 검사가 필요할 것이다.

• The Journal of Advanced Prosthodontics
• /
• 제16권4호
• /
• pp.212-220
• /
• 2024

PURPOSE. This cone-beam computed tomography (CBCT) study aimed to analyze the anatomical characteristics of alveolar bone at mandibular first molar (MFM) and their implications for immediate implant placement surgery. MATERIALS AND METHODS. 100 patients with 140 MFMs were reviewed retrospectively. We first performed a 3D reconstruction of the patient's CBCT data to determine a reference plane with ideal implant placement and orientation. The following parameters of MFM region were analyzed: mesial-distal socket size (MDSS), buccal-lingual socket size (BL-SS), root furcation fornix to inferior alveolar nerve (IAN) distance (RF-I), interradicular bone thickness (IRB), mesial/distal root apex to the IAN distance (MRA-I/DRA-I), thickness of the buccal/lingual bone of the mesial root (MR-B/MR-L), thickness of the buccal/lingual bone of the distal root (DR-B/DR-L). RESULTS. The MD-SS of MFM was 8.74 ± 0.76 mm, and the BLSS was 8.26 ± 0.72 mm. The MR-B, DR-B was 1.01 ± 0.40 mm and 1.14 ± 0.50 mm, and the difference was statistically significant (P = .001). The values of the MR-L, DR-L were 2.71 ± 0.78 mm and 3.09 ± 0.73 mm, and the difference was also statistically significant (P < .001). The mean distance of RF-I was 15.68 ± 2.13 mm, and the MRA-I was 7.06 ± 2.22 mm, which was greater than that of DRA-I (6.48 ± 2.30 mm, P < .001). The IRB at 2 mm, 4 mm apical from the furcation fornix, and at apex level was 2.81 ± 0.50 mm, 3.30 ± 0.62 mm, and 4.44 ± 1.02 mm, respectively. CONCLUSION. There is relatively sufficient bone mass in interradicular bone in height, but an adequate width is lacking for the bone between the mesial and distal root after the extraction of the MFM for immediate implantation. The thickness of the MFM buccal bone is relative thin, especially for the mesial root.

• Restorative Dentistry and Endodontics
• /
• 제28권1호
• /
• pp.1-10
• /
• 2003

This study investigated the influence of IRM on marginal microleakage of 5th generation adhesives. Class V cavities with gingival margins in dentin were prepared on both buccal and lingual surfaces of 60 extract-ed human molar teeth. Prepared teeth were randomly divided into six groups. Group 1 and 4 received no temporary restoration with IRM. Group 2 and 5 were covered with IRM mixed at P/L ratio(10g/1g). Group 3 and 6 were covered with IRM mixed at P/L ratio(10g/2g). The temporary restorations were removed mechanically with an ultrasonic scaler after one-week storage in distilled water. The cavities were restored using one of two adhesives and composites ; Single Bond/Filtek Z 250(Croup 1, 2 and 3), UniFil Bond/UniFil F(Group 4, 5 and 6). Following one day storage in distilled water, the restored teeth were thermocycled for 500 cycles(between $5^{\circ}C{\;}and{\;}55^{\circ}C$) and immersed in 2 % methylene blue for dye penetration testing. The results were analysed using Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked test at a significance level of 0.05. The results of this study were as follows 1. Ranking of mean microleakage scores at the enamel margins was Group 10.05) 4. At the dentin margins, the microleakage of the group not pretreated with IRM was lower than that of the group pretreated with IRM. And the microleakage of UniFil Bond was lower than that of Single Bond. 5. Compared with microleakages between the enamel and dentin margins of each groups, Group 1, 2, 3, 4, 5 and 6 at dentin margin were higher microleakage than those at enamel margin. There were significant difference between enamel and dentin microleakage of Group 2 and 3(p<0.05).

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.61-77
• /
• 2005

Statement of problem. The implant prosthesis has been utilized in various clinical cases thanks to its increase in scientific effective application. The relevant implant therapy should have the high success rate in osseointegration, and the implant prosthesis should last for a long period of time without failure. Resorption of the peri-implant alveolar bone is the most frequent and serious problem in implant prosthesis. Excessive concentration of stress from the occlusal force and biopressure around the implant has been known to be the main cause of the bone destruction. Therefore, to decide the location and angulation of the implant is one of the major considering factors for the stress around the implant fixture to be dispersed in the limit of bio-capacity of load support for the successful and long-lasting clinical result. Yet, the detailed mechanism of this phenomenon is not well understood. To some extent, this is related to the paucity of basic science research. Purpose. The purpose of this study is to perform the stress analysis of the implant prosthesis in the partially edentulous mandible according to the different nature locations and angulations using three dimensional finite element method. Material and methods, Three 3.75mm standard implants were placed in the area of first and second bicuspids, and first molar in the mandible Thereafter, implant prostheses were fabricated using UCLA abutments. Five experimental groups were designed as follows : 1) straight placement of three implants, 2) 5$^{\circ}$ buccal and lingual angulation of straightly aligned three implants, 3) 10$^{\circ}$ buccal and lingual angulation of straightly aligned three implants. 4) lingual offset placement of three implants, and 5) buccal offset placement of three implants. Average occlusal force with a variation of perpendicular and 30$^{\circ}$ angulation was applied on the buccal cusp of each implant prosthesis, followed by the measurement of alteration and amount of stress on each configurational implant part and peri-implant bio-structures. The results of this study are extracted from the comparison between the distribution of Von mises stress and the maximum Von mises stress using three dimensional finite element stress analysis for each experimental group. Conclusion. The conclusions were as follows : 1. Providing angulations of the fixture did not help in stress dispersion in the restoration of partially edentulous mandible. 2. It is beneficial to place the fixture in a straight vertical direction, since bio-pressure in the peri-implant bone increases when the fixture is implanted in an angle. 3. It is important to select an appropriate prosthodontic material that prevents fractures, since the bio-pressure is concentrated on the prosthodontic structures when the fixture is implanted in an angle. 4. Offset placement of the fixtures is effective in stress dispersion in the restoration of partially edentulous mandible.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.105-119
• /
• 2005

Statement of problem. As the effects of the various diameters of fixture and abutment screw on stress distribution was not yet examined, this study focused on the different design of single implant restoration using three dimensional finite element analysis. Purpose. This study was to compare five different fixture-abutment combinations for single implant supported restorations with different fixture and abutment screw diameters. Material of methods. The five kinds of finite element models were designed by 3 diameter fixtures ($\oslash$3.3, 3.75, 5.0 mm) with 3 different abutment screws $\oslash$1.5, 1.7, 2.0 mm). The crown for mandibular first molar was made using UCLA abutment according to Wheeler's anatomy. 244 N was applied at the central fossa with two different loading directions, vertically and obliquely (30$^{\circ}$) and at the buccal cusp vertically. Maximum von Mises stresses were recorded and compared in the supporting bone, crowns, fixtures, and abutment screws. Results. 1. The stresses in supporting bone and implant-abutment structure under oblique loading were greater than those under vertical or offset loading. The stresses under vertical loading were the least among 3 loading conditions regardless of the implant and abutment screw diameters. 2. The stresses in the narrow implants were greater than the wider implants. The narrow implant with narrow abutment screw showed highest stresses in the lingual crest, but the narrow implant with standard abutment screw showed highest stress in abutment screw. 3. The stresses of abutment screws were influenced by the diameter of fixtures and loading conditions. The wide implants showed least difference between two different abutment screw diameters. Conclusions. The wide implants showed lesser stresses than the narrow implants and affected least by the different abutment screw diameters. The narrow implants with standard abutment screw showed highest stresses in the lingual bony crest under oblique loading.

• Restorative Dentistry and Endodontics
• /
• 제24권2호
• /
• pp.392-398
• /
• 1999

The purpose of this study was to assess the effect of catalase used following bleaching for the elimination of hydrogen peroxide residues from human teeth on the microleakage at the tooth-resin composite interface. In this study, class V cavities were prepared on the buccal or lingual surfaces of seventy extracted human molar teeth, and crown of sixty teeth were immersed in 30% hydrogen peroxide at $37^{\circ}C$ for 5 days except for negative control group. Then the teeth were rinsed with water and distributed randomly into seven groups of 10 each and were conditioned as following Negative control group: No bleaching Positive control group : bleaching and no application of catalase (C-40) Experimental group 1 : one cycle of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 2 : two cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 3 : three cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 4 : four cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 5 : five cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching The cavities of each groups were restored with composite resin. The teeth were thermocycled, stained with 2% methylene blue, and sectioned buccolingually. Degree of dye penetration at tooth-restoration interfaces were examined by stereomicroscope(${\times}30$) at occlusal and gingival margin The results were as follows : 1. On the occlusal margin, there was no significant difference in the microleakage between the negative coltrol group and experimental groups (p>0.05). But on the gingival margin, experimental groups showed higher microleakage than the negative coltrol group (p<0.05). 2. On the occlusal margin, positive coltrol group showed higher microleakage than experimental groups (p<0.05) and among the experimental groups, group 1 showed higher microleakage than group 3, 4, 5 (p<0.05). 3. On the gingival margin, there was no significant difference between the positive coltrol group and experimental groups, and between experimental groups (p>0.05). The result indicated that catalase used in bleached cavity for the elimination of hydrogen peroxide residues from human teeth maybe reduced microleakage at the tooth-resin composite interface.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.627-643
• /
• 1995

The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on the maxillary left first molar and then filled with composite resin. Three dimentional model with 3049 nodes and 2450 8-node blick elements was made by the serial photographic method and isthmus (1/4, 1/3, 1/2 and 2/3 of intercusplal distance between mesiobuccal cusp tip and mesiolingual cusp tip) was varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 1500N was applied vertically on the node from the lingual slope of the mesiobuccal cusp. The results were as follows : 1. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 2. When it comes to stress distribution, the stress was concentrated in the facio-gingival line angle and the buccal side of the distal margin of the cavity in both Band R model. 3. With the increase of the isthmus width, the stress decreased in the area of the facio-gingival line angle, and increased in the area of facio-gingival line angle as well as the buccal side of the distal margin of the cavity in B model. In R model, the stress increased both in the area of facio-gingival line angle and the buccal side of the distal margin of the cavity, therefore the possibility of crack increased. 4. As the width of cavity increased, in B model, the direction of crack moved from horizontal to vertical on the facio-gingival line angle and the facio-pulpal line angle. In R model, the direction of the crack was horizontal on the facio-gingival line angle and moved from horizontal to the $45^{\circ}$ direction on the facio-pulpal line angle.

• 대한치과보철학회지
• /
• 제54권3호
• /
• pp.234-238
• /
• 2016

목적: 최근 치과 영역에서 CAD-CAM (computer aided design-computer aided manufacturer) 시스템의 이용과 디자인 소프트웨어가 늘어남에 따라 쉽고 빠른 수복물의 디자인이 가능해졌다. 과거에는 치과 기공사의 wax up 기술의 숙련도에 따라 금관의 외형이 결정 되었으나, CAD-CAM 시스템에서는 디자인 소프트웨어에 대한 숙련도가 더 중요한 요인이 되어가고 있다. 이에 치과 기공사와 치과의사간의 결과물의 차이를 알아보고자 한다. 재료 및 방법: 대합치와 인접치가 양호한 환자의 하악 우측 제1대구치를 금관 지대치 형성 한 후 polyether로 인상채득 하였다. 인상재에 초경석고를 이용하여 모형을 제작 하였으며, Trios 구강내 스캐너를 이용하여 STL (stereolithography) 파일을 추출하였다. 3shape dental designer 상에서 5년 이상 경력의 치과 기공사 1명, 2년 이하 경력의 치과 기공사 3명, 4명의 보철과 1년차 전공의가 동일한 STL 파일을 이용하여 금관을 디자인 하였다. CAD-CAM 시스템 경력이 가장 오래된 기공사의 디자인을 기준으로 하여 치과 기공사 그룹 3명(group DT)과 1년차 전공의 그룹 4명(group RT) 의 금관 외형을 비교하였다. 디자인된 금관의 근원심폭, 협설폭, 높이, 교두간 거리, 대합치와의 접촉점의 수를 측정, 비교 하였다. 독립표본 t검정을 시행하여 그룹간의 차이를 비교하였고, 대합치와의 접촉점의 수는 Wilcoxon signed-rank test 를 이용하였다. 결과: 정규성 검정 결과 근원심폭, 협설폭, 높이, 교두간 거리는 정규분포를 보였다. Group DT와 group RT의 금관 디자인상에서 근원심폭, 협설폭, 높이, 교두간 거리에서 통계적으로 유의할만한 차이가 없었다. 대합치와의 접촉점 수는 정규분포를 보이지 않았으며, wilcoxon signed-rank test 결과 통계적으로 유의한 차이를 보이지 않았다. 결론: 금관의 외형의 크기에 있어서는 group DT와 group RT 사이에 통계학적으로 유의할만한 차이가 없었지만 수치화하기 어려운 금관의 해부학적 형태나 주변 치아와의 형태적 유사성 등은 차이가 있었다. 디자인 소프트웨어에 대한 숙련도가 높아진다면 각 술자가 가지고 있는 교합에 대한 개념을 더 구현하기 쉬울 것이다.