• Imaging Science in Dentistry
• /
• v.41 no.3
• /
• pp.115-121
• /
• 2011

Purpose : This article is to describe a modified device for intraoral radiography which was developed to obtain reproducible radiographic images for assessment of distal osseous defects of the mandibular second molar (2 Mm) after impacted third molar (3 Mm) surgery. Materials and Methods : A commercial available alignment system for posterior region was modified by adding a reference gauge pin (millimetric) and threading a hollow acrylic cylinder at the ring of the radiographic positioner to attach the X-ray collimator. The design included customized resin acrylic stent for the occlusal surface of the 2Mm in maximum intercuspal position, individualizing the biteblock positioner. Periapical radiographs were taken before and after surgical extraction of 3 Mm, employing the radiographic technique of parallelism described by Kugelberg (1986) with this modified film holder and inserting the gauge pin on the deepest bone probing depth point. Results : This technique permitted to obtain standardized periapical radiographs with a moderate to high resolution, repeatability, and accuracy. There was no difference between the measurements on the pre- and post-operative radiographs. This technique allowed better maintenance of the same geometric position compared with conventional one. The insertion of the gauge pin provided the same reference point and localized the deepest osseous defect on the two-dimensional radiographs. Conclusion : This technique allowed better reproducibility in posterior radiographic records (distal surface of 2 Mm) and more accurate measurements of radiographic bone level by the use of a millimetric pin.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.323-336
• /
• 1996

This is a retrospective study on the patients with infection of the oral and maxillofacial region with the purpose of obtaining some useful data for diagnosis and treatment plan of that relatively common disease in dentistry. The used materials of study were 87 in total, including 52 male patients, 35 female patients who diagnosed and treated at the Department of the Dentistry in Hanyang Medical College Hospital for the period of Jan. 1990 to Dec. 1994. The author analyzed the distribution and incidence of sex, age, admission period, etiologic factors, etiologic teeth, treatment method of infections, pus culture, antibiotics sensibilities and medication. The result obtained as follows : 1. The developmental incidences by sex was superior in male by the ratio of 1.5 : 1 and the infection was most frequently occurred during the third decades(35.6%). 2. The number of admitted patients elevated in February, March, and April, and average of admission period was 9.8 days. 3. Main etiologic teeth showed on lower molar region in adult(63%) and upper molar region in primary dentition(46.1%). 4. Medications were administrated in all of the cases, and surgical incision and drainage were performed in 53% and extraction of the causative teeth were performed in 63.6% of all cases. 5. The most common involved fascial spaces were Buccal space(41.4%), Infraorbital space(27.6%), Submandibular space(16.1%),in order, and 9 cases(10.3%) were Ludwig's Angina. In 68.2% of the patients, and infection involved only one fascial space and in 21.8% of the patients, it involved to more fascial spaces. 6. The most causative organisms isolated from pus culture were Gram-positive facultative cocci(55.5%), and antibiotics sensitivities on the total isolated bacterial strains were exposed chloramphenicol(88.6%), Cephalothin(88.6%), Erythromycin(81.5%), Lincomycin(77.8%) in order, but it showed resistant on Gentamycin(58.3%), Tetracycline(56.5%), Methicillin(38.5%).

• Imaging Science in Dentistry
• /
• v.47 no.4
• /
• pp.261-267
• /
• 2017

Purpose: Analyzing different patterns of maxillary sinus septa in cone-beam computed tomography (CBCT) images and predicting maxillary sinus membrane perforations. Materials and Methods: In this cross-sectional study, CBCT images of 222 patients ranging from 20 to 81 years old were evaluated. One hundred fifty-two patients (93 females and 59 males) who had maxillary sinus septa in axial views were included in this study. Cross-sectional images were used to determine classifications of sinus septa and the risk of membrane perforation using a method modified from Al-Faraje et al. Variables of sex, age, and dental status were considered. Chi-squared and Kruskal-Wallis tests were used for data analysis(P<.05). Results: In this study, 265 maxillary sinus septal patterns were found. The mean age of the patients was $44.1{\pm}14.7$ years old. The Class I and VII-div II patterns had the greatest and least prevalence, respectively. Furthermore, there was a significant relationship between the location of septa and the frequency of membrane perforation risk (P<.05). In this study, the relationship of different patterns of septa with dental status did not differ significantly (P>0.05). Conclusion: A higher prevalence of moderate risk of membrane perforation in the molar region relative to the premolar region was observed. Furthermore, maxillary sinus septa occur most frequently in the molar region, demonstrating the importance of paying attention to this region during sinus lift surgery. This study did not show any relationship between tooth loss and the presence of septa.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.1
• /
• pp.36-42
• /
• 2011

Introduction: The current study examined the morphological characteristics of maxillary sinus septum by computed tomography (CT). Materials and Methods: Two hundred and four patients (408 maxillary sinuses) who visited dental clinic were evaluated. CT were examined. The height of the septum measured from the sinus floor to the apex of the septum more than 3 mm was defined as "sinus septum". Results: The prevalence of sinus septa was 21.3% (87/408), and 31.4% (64/204) of patients had more than 1 sinus septum. Females showed higher and thinner sinus septa than males. The anatomic location of the septa were distributed in the 2nd molar region (43.7%), 1st molar region (31.0%), 2nd premolar region (21.8%) and 1st premolar region (3.5%). In 57 patients with chronic disease, there was no significant difference between sinus disease and the presence of sinus septa. The loss of remaining teeth and teeth adjacent to the sinus septum area was not related to the presence of sinus septa. Older subjects showed a reduced height and length of the septum, and a thicker septum. Conclusion: These results show that the maxillary sinus septum undergoes atrophy with age.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.885-895
• /
• 1994

This study was performed to compare the dental arch dimensions of urban and rural high school females according to the region of residence and facial type. A model and cephalometric analysis was made from 48 urban and 48 rural high school females. The results of this study were obtained as follows : 1. Arch width in the urban group were similar to the rural group. 2. Lingual arch length at upper 1st premolar level in the urban group was larger than the rural group and lingual arch length at lower canine level in rural group was larger than the urban group. 3. Palatal height at canine level in the rural group was higher than the urban group. 4. Palatal heights at 2nd premolar and 1st molar level had correlation with the VERT index. In comparison of lingual arch dimensions according to Rickett's facial group, palatal heights at 2nd premolar and 1st molar level in dolichofacial group were lower than other groups.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.257-265
• /
• 2020

Densities (ρ) for binary mixtures of ethanol (1) + diisopropyl ether (DIPE) or cyclohexane or alkane (C₆-C₉) (2) were measured at 298.15 K, 308.15 K and 318.15 K. The excess molar volume (V^E_m) of binary mixtures was calculated using ρ data and correlated with Redlich-Kister polynomial equation. The V^E_m values for binary mixtures of ethanol (1) + cyclohexane or n-alkane (C₆-C₉) (2) were positive, whereas for ethanol (1) + DIPE (2) these were negative. The magnitude of V^E_m values follows the order: cyclohexane > n-nonane > n-octane > n-heptane > n-hexane > DIPE. The V^E_m values have been interpreted qualitatively and also quantitatively in terms of Flory-Treszczanowicz-Benson (FTB) model and Prigogine-Flory-Patterson (PFP) theory. The values V^E_m predicted using FTB model agree well with experimental V^E_m values at all mole fractions. But the PFP theory describes well V^E_m data in ethanol-rich region (x₁ > 0.5) for all binary mixtures and is able to predict the sign of V^E_m vs x₁ curve for ethanol-lean region (x₁ < 0.5) except for ethanol (1) + nonane (2) mixtures.

• Journal of Periodontal and Implant Science
• /
• v.49 no.4
• /
• pp.237-247
• /
• 2019

Purpose: To analyze the maxillary sinus anatomy over edentulous ridges in the bilateral posterior maxillary area in Taiwanese patients using cone-beam computed tomography (CBCT). Methods: In total, 101 anatomical sites from 61 patients, including 32 premolar and 69 molar regions, were analyzed using CBCT. Measurements were made of the width and height of edentulous ridges, the thickness of the lateral wall of the maxillary sinus, and the presence of a sinus septum and the posterior superior alveolar artery (PSAA). A statistical analysis of the measurements was performed, and correlations among the measurements were assessed. Results: The average ridge width was $10.26{\pm}3.16mm$, with a significantly greater ridge width in the second molar region than in the premolar region. The mean residual ridge height was $8.55{\pm}4.09mm$, and ridge height showed an opposite trend from ridge width for the premolar and molar regions. A sinus septum was present at 5.9% of the sites, and the PSAA was observed in 24.5%. The average thickness of the lateral wall of the maxillary sinus was $2.08{\pm}0.94mm$, with no significant difference between the tooth position and lateral wall thickness. Conclusions: This study presents the anatomical features of the maxillary sinus, which should be considered in sinus lift procedures for implant placement, in the Taiwanese population. The use of CBCT is recommended to avoid intraoperative complications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.331-334
• /
• 2000

The organic electroluminescent(EL) device has gathered much interest because of its large potential in materials and simple device fabrication. We fabricated EL devices which have a blended single emitting layer containg poly(Nvinylcarbazole)[PVK] and poly(3-dodecylthiophene)[P3DoDT]. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer between polymer emitting layer and AI electrode. All of the devices emit orange-red light and it's can be explained that the energy transfer occurs from PVK to P3DoDT. Within the molar ratio 1:0, 2:1 and 1:1, the energy transfer was not saturated, which results in the not appearance of PVK emission in the blue region. In the voltage-current and voltage-light power characteristics of devices applied LiF layer, current and light power drastically increased with increasing with applied voltage. In the consequence of the result, the light power of the device have a molar ratio 1:1 with LiF layer was about 10 times larger than that of the device without PVK at 6V.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.110-116
• /
• 2000

A 61-years old man with diabetes mellitus(DM) was admitted to our hospital, complaining of progressive right periorbital swelling, headache and toothache on the right lower second molar. On the first visit, moderate swelling was noticed from the right periorbital region with exophthalmos and subconjunctival effusion. Intraorally, right lower second molar had a severe periodontal disease and fistular formation on its distal area. From 3 days after hospitalization, the visual acuity of his right eye was gradually worsen and we performed CT scan. CT scan demonstrated an inflammatory change at the right orbit with subperiosteal abscess at the inferior orbital wall, which was extended from the right infratemporal, parapharyngeal and internal pterygoid space. Patient was treated by mean of intraoral(right upper vestibular and retromolar) and extraoral(infraorbital) incision and drainage, massive anti-therapy and DM control. The patient improved gradually and finally was discharged from the hospital, but his visual loss of right side was not recovered.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.16 no.1
• /
• pp.103-112
• /
• 1986

The purpose of this study was to investigate the numbers and causes of retakes in 300 complete mouth radiographic surveys made by 75 senior dental students. According to radiographic techniques and film holding methods, they were divided into 4 groups: Group Ⅰ: Bisecting-angle technique with patient's fingers. Group Ⅱ: Bisecting-angle technique with Rinn Snap-A-Ray device. Group Ⅲ: Paralleling technique with Rinn XCP instrument (short cone) Group Ⅳ: Paralleling technique with Rinn XCP instrument (long cone) The most frequent cause of retakes, the most frequent tooth area examined, of retakes and average number of retakes per complete mouth survey were evaluated. The obtained results were as follows: Group Ⅰ: Incorrect film placement(47.8%), upper canine region, and 0.89 Group Ⅱ: Incorrect film placement (44.0%), upper molar region, and 1.12. Group Ⅲ: Incorrect film placement (79.2%), upper molar region, and 2.05 Group Ⅳ: Incorrect film placement (67.7%), upper molar region, and 1.69. The average number of retakes per complete mouth survey of paralleling technique (Group Ⅲ＋Ⅳ) was higher than that of bisecting-angle technique (Group Ⅰ ＋ Ⅱ) (p<0.01). There was no difference between Group Ⅰ and Group Ⅱ, and between Group Ⅲ and Group Ⅳ in the average number of retakes per complete mouth survey (p>0.05).