• 치과방사선
• /
• 제4권1호
• /
• pp.45-57
• /
• 1974

This report based on 300 cases of serious diseases in maxillofacial region by radiograms seen at the department of dental radiodontics, infirmary school of dentistry, Kyung Hee University from October 1971 to August 1974. The maxillofacial diseases were analysed upon the following items, such as 1) the frequency of dominant diseases, 2) sex-ratio of male to female, 3) predominant region of diseases, 4) comparison with the age, 5) the incidence of diseases in relative to the individual teeth. The results were obtained as follows. 1) Among the total of 300 cases of the patients, the frequency of dominant diseases of patients were fractures of facial bone (44.3±2.87%), inflammatory diseases (22.7±2.39%), cysts (11.1±1.62%), tumors (10.7±1.77%), maxillary sinusitis (7.9±1.56%), temporomandibular joint disorders(3.3±1.05%) in the order. 2) The ex-ratio of male to female in occurence of jaw fractures were 7.3:1, temporomandibular joint disorders were 2.1:1, inflammatory diseases were 1.8:1, maxillary sinusitis were 1.7:1, but tumors were equal to 1:1, while cysts were 1:1.2 in sex difference. 3) The predominant region of mandibular fractures were symphysis(17.3±3.27%), canine region (15.0±3.09%), and angle region (14.3:±3.04%) in the order. Inflammatory diseases were occured frequently in mandible and it's left side were a little dominant. Odontogenic cysts were observed frequently in maxilla, but regardless of right and left. Carcinomas were involved most frequently in maxilla, while sarcomas and ameloblastomas in mandible. Frequency of the maxillary sinusitis were dominant right side and molar area, also temporomandibular joint disorders were right side. 4) To study comparison with the age jaw fractures showed the highest ratio at the 2nd decade(32.3±4.06%), and 3rd decade (27.8±3.89%), 4th decade (19.6±3.44%), 6th decade (9.0±2.47%), 5th decade(6.0±2.06%), 1st decade (5.3±1.95%) in the order. But 7th decade were not involved entirely. Frequency of the inflammatory diseases were the highest in the age group of 3rd decade (28.0±5.44%), and those of cysts were 5th decade (24.2±7.22%), temporomandibular joint disorders were 3rd decade (60.0±15.49%). Tumors were occured frequently over the 4th decade especially malignint tumors over the 5th decade, but maxillary sinusitis were rearless of age except for 2nd decade. 5) About the incidence of diseases in relative to individual teeth, fractures of facial bone were most frequently involved the maxillary and mandibular anterior teeth, and mandibular 3rd molar region. Cysts were maxillary anterior region inflammatory diseases were mandibular molar region maxillary sinusitis were maxillary 1st molar, region but tumors were regardless of individual teeth.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.245-256
• /
• 2001

The purpose of this study is to analyze the mechanical stress and displacement on the jaws during the simulated bilateral clenching task on the three-dimensional finite element model of the dentated skull with unilateral molar loss. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 2.0mm intervals. The fully assembled finite element model consists of the articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The FE model was used to simulate the bilateral clenching in intercuspal position. The loading condition was the force of the masseter muscle exerted on the mandible as reported by Korioth et al. degrees of freedom of the zygomatic region where the masseter muscle is attached were fixed as restraints. In order to reflect the actual action of the muscles force, the displacement of the region was attached where the muscle is connected to the temporal bone and restraint conditions were given values identical to values at the attachment region of the masticatory muscle but with the opposite direction of the reaction from when the muscle force is acted on the mandible. Although the mandible generally has higher displacement and von Mises stress than the maxilla, its mandibular corpus on the molar-loss side has a higher stress and displacement than the molar-presence side. Because the displacement and von Mises Stress was the highest on the lateral surface of mandibular corpus with molar loss, the stress level of the condyle on the molar-loss side is greater than that of the molar-presence side, which in turn caused the symphysis of the mandible to bend. In conclusion, the unilateral posterior bite collapse with molar loss under para-functional activities such as bruxism and clenching can affect the stress concentration on the condyle and mandibular corpus. It is therefore necessary to consider the biomechanical function of dento-skeleton under masticatory force while designing the occlusal scheme of restoration on alveolar bone with the posterior collapse.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권1호
• /
• pp.17-20
• /
• 2014

Objectives: The aim of this study was to retrospectively evaluate the clinical survival rate of Astra Tech implants in the maxillary molar region performed with sinus lift and bone graft. Materials and Methods: Ninety-nine Astra Tech implants (Osseospeed) placed in the maxillary molar region using sinus lift from September 2009 to February 2012 were selected with a minimum follow-up period of 1 year. The height of alveolar bone, sinus approach technique, bone material and implant survival rate were evaluated. Results: Of the 99 implants, the survival rate was 90.9%; 8 implants failed within 1 year after implant placement, and 1 implant failed 1 year after implant loading. All failed implants were placed with sinus lift simultaneously. The average height of alveolar bone before implant placement was 6.9 mm, while the height of alveolar bone of failed implants was 2.1 mm, on average. Conclusion: Astra Tech implants placed in the maxillary molar region had generally good survival rates, but the relationship between reduced pre-implant alveolar bone height and implant failure requires further attention.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권3호
• /
• pp.137-146
• /
• 2020

Background: Mandibular third molar removal is the most common surgical procedure encountered in oral and maxillofacial clinics. It also presents the greatest challenges and controversies for surgeons when surgical removal is considered. Furthermore, diverse anesthesia results and success rates are achieved after using the same concentrations of different solutions or the same amounts of local anesthetics. The purpose of this study was to examine the efficiency of using double-cartridge (3.4 ml) 4% lidocaine (high concentration) and 4% articaine with a 1:100000 epinephrine infiltration in the retromolar region for impacted lower third molar surgery. Methods: This double-blind study included 30 patients with symmetrically impacted lower third molars. The patients were randomly selected to receive 4% articaine on one side and 4% lidocaine on the other, as a local anesthetic for third molar surgery. The onset, duration of soft-tissue numbness, pulpal sensitivity, amount of additional local anesthetic needed, pain score during the surgical procedure, and duration of the operation were recorded. Results: The results of this research indicate that 86.7% of the operations in the 4% articaine group and 83.3% of those in the 4% lidocaine group were successful. Furthermore, the outcomes in both groups were not statistically significant (P > 0.05). Numbness onset occurred faster in the articaine group than it did in the lidocaine group. However, the duration of soft-tissue anesthesia and pain scores recorded immediately postoperatively were similar. Conclusion: It is concluded that 4% lidocaine and 4% articaine had a similar infiltration efficacy in the retromolar region and both local anesthetics are adequate for impacted lower third molar surgery. There were no statistically significant differences between the two local anesthetics regarding pain control and the duration of soft-tissue numbness during the procedure.

• 대한치과보철학회지
• /
• 제51권4호
• /
• pp.252-260
• /
• 2013

연구 목적: 치과 임플란트가 소개된 이후로 단일 치아 상실에 따른 임플란트 수복에 관한 성공적인 연구 결과들이 보고되고 임상적으로도 널리 사용되고 있다. 구강내의 다양한 부위에 따른 연구들이 있어 왔으나, 교합력이 강한 구치부 특히 하악 구치부에서 단일 임플란트에 관한 연구가 필요할 것이다. 본 연구는 하악의 제1대구치와 제2대 구치 부위에 식립된 단일 임플란트의 생존율에 관해 연구, 분석하였다. 연구 대상 및 방법: 2002년부터 2009년까지 대구광역시 소재의 7개 치과의원에서, 하악 제1, 2대구치에 단일 임플란트 치료를 받은 환자 284명에게 식립된 308개의 임플란트를 대상으로 하였다. 하악 제1대구치에 168개의 임플란트가 식립되었고, 하악 제2대구치에 140개의 임플란트가 식립되었다. 이들 임플란트는 식립위치, 환자의 성별, 연령, 임플란트의 직경 및 길이에 따라 분석하였다. 결과:하악 제1대구치에서는 4개의 임플란트가, 하악 제2대구치에서는 10개의 임플란트가 실패하였다. 하악 제1대구치에서는 97.6%, 하악 제2대구치에서는 92.9%의 성공률을 나타내었다. 환자의 연령, 성별, 식립방법, 임플란트의 직경 등에 따른 차이는 관찰할 수 없었다. 결론: 하악 제1대구치 단일 임플란트의 생존율은 하악 제2대구치 단일 임플란트의 생존율보다 높게 나타났다. 이는 하악 제2대구치 부위의 골질이 좋지 않고, 하악의 해부학적인 구조로 인해 하악 제2대구치 부위에 과도한 교합력이 가해질 우려가 있기 때문이라 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.101-112
• /
• 2004

Osseointegrated implnats have proven to be successful in both full and partial edentulous patients since the 1960s and recently have shown successful results when used to restore single tooth missing. However, in most studies reporting the success of single implants, single implants replacing anterior teeth are more frequently mentioned than posterior single implants. Moreover, in studies regarding posterior single implants, the replaced region seemed to be variable; the maxilla, mandible and areas from the first premolar to the second molar were mentioned. However, considering the difference in bone quality in the mandible and maxilla, and the increased occlusal force in the posterior region, the success rates in each region may be different. In this study, the cumulative success rates and amount of bone loss of single implants replacing the mandibular first and second molar, respectively, were compared and analyzed to come to the following conclusion. 1. The 20 (20 persons) single implants that were placed in the mandibular first molar region were all successful and showed a 100% 5 year cumulative success rate. Among the 27 (24 persons) single implants replacing the mandibular second molar, 8 failed (27.63%) showing a 5 year cumulative success rate of 70.37%. 2. Among the 8 failed implants, one showed symptoms of postoperative infection and one complained of parenthesia. 6 implants failed after functional loading; 5 showed mobility and one resulted in fixture fracture. 3. After the attachment of the prosthesis, there was no significant statistical difference regarding the marginal bone loss in group 1 and group 2 during the checkup period (P>0.05). In conclusion, restoration of the mandibular first molar using single implants was found to be an excellent treatment modality, and when replacing mandibular second molars with single implants, poor bone quality and risk of overloading must be considered.

• 치과방사선
• /
• 제11권1호
• /
• pp.75-78
• /
• 1981

The diagnostic value of a intra oral film is related to projecting technic and interpretation. The intra-oral film is a single plane representation of a three dimensional object, therefore superimposition is inevitablly present. The purpose of this article is to show how foreign objects in the jaw may be localized. The author used double exposure technics, that are changed angulation of vertical or horizontal to one film. The obtained results are as fallow: 1. In the upper anterior region, the moving distance of the labially impacted reference object was greater than that of the palatally impacted one. 2. In the upper molar region, the moving distance of the mesiobuccal root apex was the greatest and that of palatal root apex was the shortest. 3. In the lower molar region, the change of the alveolar bone level in the buccal side was greater than that of lingual side.

• Imaging Science in Dentistry
• /
• 제50권1호
• /
• pp.37-43
• /
• 2020

Purpose: The purpose of this study was to evaluate the accuracy of linear measurements in the horizontal and vertical dimensions based on object position and slice inclination in cone-beam computed tomography (CBCT) images. Materials and Methods: Ten dry sheep hemi-mandibles, each with 4 sites (incisor, canine, premolar, and molar), were evaluated when either centrally or peripherally positioned within the field of view (FOV) with the image slices subjected to either oblique or orthogonal inclinations. Four types of images were created of each region: central/cross-sectional, central/coronal, peripheral/cross-sectional, and peripheral/coronal. The horizontal and vertical dimensions were measured for each region of each image type. Direct measurements of each region were obtained using a digital caliper in both horizontal and vertical dimensions. CBCT and direct measurements were compared using the Bland-Altman plot method. P values <0.05 were considered to indicate statistical significance. Results: The buccolingual dimension of the incisor and premolar areas and the height of the incisor, canine, and molar areas showed statistically significant differences on the peripheral/coronal images compared to the direct measurements (P<0.05). Molar area height in the central/coronal slices also differed significantly from the direct measurements (P<0.05). Cross-sectional images of either the central or peripheral position had no marked difference from the gold-standard values, indicating sufficient accuracy. Conclusion: Peripheral object positioning within the FOV in combination with applying an orthogonal inclination to the slices resulted in significant inaccuracies in the horizontal and vertical measurements. The most undesirable effect was observed in the molar area and the vertical dimension.

• Journal of Periodontal and Implant Science
• /
• 제50권1호
• /
• pp.28-37
• /
• 2020

Purpose: The aim of our study was to determine the prevalence and degree of lingual concavities in the first molar region of the mandible to reduce the risk of perforating the lingual cortical bone during dental implant insertion. Methods: A total of 163 suitable cross-sectional cone-beam computed tomography images of edentulous mandibular first molar regions were evaluated. The mandibular morphology was classified as a U-configuration (undercut), a P-configuration (parallel), or a C-configuration (convex), depending on the shape of the alveolar ridge. The characteristics of lingual concavities, including their depth, angle, vertical location, and additional parameters, were measured. Results: Lingual undercuts had a prevalence of 32.5% in the first molar region. The mean concavity angle was 63.34°±8.26°, and the mean linear concavity depth (LCD) was 3.03±0.99 mm. The mean vertical distances of point P from the alveolar crest (Vc) and from the inferior mandibular border were 9.39±3.39 and 16.25±2.44, respectively. Men displayed a larger vertical height from the alveolar crest to 2 mm coronal to the inferior alveolar nerve (Vcb) and a wider LCD than women (P<0.05). Negative correlations were found between age and buccolingual width at 2 mm apical to the alveolar crest, between age and Vcb, between age and Vc, and between age and LCD (P<0.05). Conclusions: The prevalence of lingual concavities was 32.5% in this study. Age and gender had statistically significant effects on the lingual morphology. The risk of lingual perforation was higher in young men than in the other groups analyzed.

• 대한두개안면성형외과학회지
• /
• 제23권3호
• /
• pp.103-110
• /
• 2022

Background: The primary objectives of mandibular surgery are to achieve optimal occlusion, low sensory disturbance, and adequate fixation with early movement. In-depth knowledge of the mandibular structure is required to achieve these goals. This study used computed tomography (CT) to evaluate the mandibular cortical thickness and cancellous space according to age and sex. Methods: We enrolled 230 consecutive patients, aged 20 to 50 years, who underwent CT scanning. The cortex and cancellous space centered around the inferior alveolar nerve (IAN) canal were measured at two specific locations: the lingula and second molar region. Statistical analysis of differences according to increasing age and sex was performed. Results: The t-test revealed that the cancellous space and cortical thickness differed significantly with respect to the threshold of 35 years of age. Both cortical thickness and cancellous space in the molar region were negatively correlated with age. Meanwhile, both cortical thickness and cancellous space in the lingula region showed a positive correlation with age. With respect to sex, significant differences in the cancellous space at the molar region and the cortical thickness at the lingula were observed. However, no further statistically significant differences were observed in other variables with respect to sex. The sum of each measurement on the mandibular body reflected the safe distance from the surface of the outer cortex to the IAN canal. The safe distances also showed statistically significant differences between those above and below 35 years of age. Conclusion: Knowledge of the anatomical structure of the mandible and of changes in bone structure is crucial to ensure optimal surgical outcomes and avoid damage to the IAN. CT examination is useful to identify changes in the bone structure, and these should be taken into account in the planning of surgery for older patients.