• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.418-424
• /
• 1996

(Ti.W)C complex carbide was synthesized by self-propagating high temperature synthesis (SHS) chemical furnace. Attempt to find the optimal condition for synthesis of (Ti.W)C the effects of molar ratio of Ti:W:C on the synthesized powders and mechanical properties were investigated, Optimum molar ratio of these synthe-sized powder was Ti:W:C=0.7:0.2:1.0 The bulk density M,O.R Hardness Fracture toughness of (Ti.W)C complex carbide sintered at 200$0^{\circ}C$ for 60 min by hot-pressing under the pressure of 20 MPa were 7.6g/cm3, 475 MPa, 17,.7 GPa respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.51-58
• /
• 1993

The phenol resorcinol formaldehyde resin (PRF) adhesives which are curing at ambient temperature for structural purposes were synthesized. A PRF resin is produced according to the two-stage reaction system. In first stage, a low-condensed resol or methylolated phenol were prepared from phenol by reaction with a formaldehyde in alkaline condition. The molar ratio of phenol to formaldehyde was 1.0~1.4. And in second-stage, resorcinol was added to combine with the methylol group of a low-condensed resol(R/P molar ratio 0.3). The glue-joint strength, pot-life and workability of this synthetic PRF resin were superior to conventional ambient temperature setting adhesives such as oilic urethane or water based polymer-isocyanate resin for wood adhesives.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.113-119
• /
• 2000

Alkylation of phenol with tert-butanol in the liquid phase on mordenite was studied. The influence of many reaction parameters such as calcination temperature, reaction temperature, t-butanol/phenol molar ratio on catalytic properties was discussed. The main products were 2,4-di-t-butylphenol, o-t-butylphenol, p-t-butylphenol, the last of these was wanted product. In order to enhance the selectivity of p-t-butylphenol, optimum conditions were recommended at $500^{\circ}C$ calcination temperature, $140^{\circ}C$ reaction temperature, 1.0 molar ratio of reactants over mordenite. P-t-butylphenol was formed with 90% isomer selectivity at optimum conditions after 4hr reaction. On the basis of the behavior obtained in the cases mentioned, optimum conditions and catalytic properties for t-butylation of phenol were provided.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.3
• /
• pp.251-258
• /
• 2003

Biodiesel as methyl esters derived from vegetable oils has considerable advantages in terms of environmental protetion. In the present work, methyl esters were produced from soybean oil by lipase-catalyzed transesterification. To reduce inactivation of commercial immobilized lipases emulsified two-step process was developed using the stepwise addition of methanol with 4:1 molar ratio at 4h intervals. Also with immobilized lipase from Candida antarctica(Novozym 435) high conversion of 98.5 percent was possible at $45^{\circ}C$ of reaction temperature with 4:1 of methanol-to-oil molar ratio and 1%(v/v) methyl glucoside oleic polyester as an emulsifier in the presence of cosolvent.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.179-185
• /
• 2009

The esterification of the reactants of Jatropha oil and methanol added by propyleneglycol was done using p-TSA catalyst. And then the emulsification of triglyceride and methanol was conduced by 1.0vol% GMS. The emulsified reactants were transesterified at $65^{\circ}C$ using TMAH and mixed catalyst (50wt%-TMAH+50wt%-NaOH) respectively. The esterification conversion at the 1:8 molar ratio of free fatty acid to methanol using 8.0wt% p-TSA was 94.7% within 80min. The overall conversion at the 1:8 molar ratio of mixed fat(50wt% Beef Tallow) to methanol and $65^{\circ}C$ using mixed catalyst was 95.4% The cloud point of Biodiesel decreased with the addition of petroleum diesel.

• Journal of Pharmaceutical Investigation
• /
• v.11 no.3
• /
• pp.1-13
• /
• 1981

A new application of monoacidic dye is reported for the determination of pipethanate hydrochloride(PTH). The method is based on solvent extraction into chloroform of an ion-pair compound formed between methyl orange(MO) and PTH. PTH is determined by measuring absorbance of the extracts over the range of $2.0{\sim}12.0{\mu}g/ml$ at 420nm. Best accuracy can be obtained for solutions containing $3.0{\sim}8.0{\mu}g/ml$. The color was stable for at least 5 days. The molar absorptivity was $2.88\;{\times}\;10^4\;l,\;mol^{-1},\;cm^{-1}$. Molar ratio and continuous variation plots have a maximum at 0.5 mol fraction of MO, indicating a 1 : 1 MO-PTH ratio.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.12-18
• /
• 2006

The transesterification of vegetable oils into Biodiesel at $60^{\circ}C$ was performed on the rotary viscometer. The overall yield(%) of fatty acid methyl ester from canola oil at optimum conditions was 95%. The viscosities of fatty acid methyl esters were predicted by Orrick and Erbarr's model. The overall yield increased as the viscosities of fatty acid methyl esters decreased. The limiting molar ratio of methanol to oil appeared to be 1:5. The content of sodium hydroxide as the optimum catalyst appeared to be 0.5wt%.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.190-195
• /
• 2007

The transesterifications of beef tallow and the mixture of beef tallow and rapeseed oil were conducted at $65^{\circ}C$ respectively using TMAH, NaOH and their mixed catalysts. The reactants were emulsified with 1vol% emulsifier and propylene glycol. The overall conversion of beef tallow was 95% at such optimum conditions as the 1:8 of molar ratio and 0.8 wt% TMAH. The overall conversion of mixed fat at the 1:8 of molar ratio and mixed catalyst of 70 wt% TMAH 30 wt% NaOH was close to 97% which appeared at 0.8 wt% TMAH in 80min. And the kinematic viscosity of biodiesel mixture using the mixed catalyst was $6.5mm^2/s$ at $40^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.259-262
• /
• 2001

Stable polyaniline-dodecylbenzenesulfonic acid (PANI-DBSA) fully dissolved in toluene was obtained by a direct one-step emulsion polymerization technique. The polymerization of aniline was carried out in an emulsion comprising water, toluene and DBSA acting both as a surfactant and a dopant for PANI. After the proper washing process was performed, the conductivities of obtained PANI-DBSA complexes increased with increase APS/Aniline molar ratio and DBSA/Aniline molar ratio. The UV-Vis absorption spectra and TGA thermograms of PANI-DBSA complexes also supported these results. PANI-DBSA/PS blends were prepared by mixing PANI-DBSA complexes with PS in toluene. These blends exhibited electrical conductivity of 0.371S/cm at a low PANI-DBSA content (7 wt.%)

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.198-201
• /
• 2000

The capacity of micelle formation between astaxanthin and various surfactants was compared. Tween 20 was identified the most suitable surfactant in terms of astaxanthin extraction capacity. The ethylene oxide group of Tween 20 was identified as the most significant factor to increase the HLB value that determined the extraction capacity. The effect of micelle formation condition, such as molar ratio of astaxanthin and Tween 20, pH and ionic strength was also investigated. pH and ionic strength showed no significant effects. Antioxidant activity of astaxanthin was twice of ${\alpha}-tocopherol$ and 4 times of ${\beta} -carotene$. Crude astaxanthin extract from the yeast cell seemed to be less degraded than pure astaxanthin by air and light exposure, probably because of the presence of other carotenoids and lipids. Under the optimal conditions, the molar ratio of micelle formed was found to be 1 : 12 for astaxanthin : Tween 20.