• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1763-1770
• /
• 2013

A series of the block copolymers were successfully synthesized from post-sulfonated hydrophilic and hydrophobic macromers via three-step copolymerization. The degrees of sulfonation (DS) of the copolymers (10%, 30%, or 50%) were controlled by changing the molar ratio of the hydrophilic and hydrophobic parts. The resulting block copolymers were characterized by $^1H$ NMR and other technologies. The membranes were successfully cast using dimethyl sulfoxide (DMSO) solution at $100^{\circ}C$. The copolymers were characterized to confirm chemical structure by $^1H$ NMR and FT-IR. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) demonstrated that all sulfonated block copolymers exhibited good thermal stability with an initial weight loss at temperatures above $240^{\circ}C$. The membranes showed acceptable ion exchange capacity (IEC) and water uptake values in accordance with DS. The maximum proton conductivity was 184 mS $cm^{-1}$ in block copolymer-50 at $60^{\circ}C$ and 100% relative humidity, while the conductivity of Nifion-115 was 160 mS $cm^{-1}$ under the same measurement conditions. AFM images of the block copolymer membranes showed well separated the hydrophilic and hydrophobic domains. From the observed results it is that the prepared block membranes can be considered as suitable polymer electrolyte membranes for the application of polymer electrolyte membrane fuel cells (PEMFC).

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.342-347
• /
• 1998

Light-weight conductive polymer composites were prepared by incorporating polyheterocycles such as polypyrrole and polythiophene into pores of a highly porous cross-linked polystyrene, host polymer, to form a conductive network. The highly hydrophobic and porous host polymer was synthesized by concentrated emulsion polymerization method. Polypyrrole-based composites, prepared by employing ferric chloride-methanol system, showed a conductivity as high as 0.82 S/cm. Conductivity of polythiophene-based composites, prepared from ferric chloride-acetonitrile system, was 6.05 S/cm. Conductivity of compositivity was influenced by the initial molar ratio of oxidant to monomer as well. SEM micrographs of the composites showed that conducting polymer coated uniformly the inside wall of the porous host polymer. Shielding effectiveness of the polypyrrole-based composites and of the polythiophene-based composites were 15.2 dB and 22.5 dB at 2.0 GHz, respectively. In the temperature range from 20 to 300K, a polypyrrole impregnated composite exhibited seimiconducting behavior and followed the variable range hopping(VRH) model for charge transport.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.195-205
• /
• 2004

We have synthesized new aromatic polyesters (DiPEG-HQ and DiPEG-BP) by condensation polymerization of a terephthalic acid derivative bearing a pendant oligo(oxyethylene) (DP = 7, MW = 350), which has a methoxy terminal group, and two different aromatic diols, hydroquinone and 4,4'-biphenoI. The synthesized polymers were characterized by differential scanning calorimetry (DSC), polarizing microscopy, and X-ray diffractometry for their liquid crystallinity (LC), thermal transitions, and structural morphologies in mesophases. The morphology of the LC phases depends strongly on the length of the rigid backbone repeating unit. The DiPEG-BP polymer having a longer repeating unit exhibits both layered and nematic structures before isotropization, whereas the DiPEG-HQ polymer having a shorter repeating unit shows only the layered structure in the mesophase. We found that the layer spacing for DiPEG-HQ is larger than that for DiPEG-BP. Both polymers easily form complexes with LiCF$_3$SO$_3$; we studied this complex formation by FT-IR spectroscopy. The layer spacing of the polymer-electrolyte composites increases upon increasing the amount of the lithium salt. The polymer/salt electrolyte mixtures we investigated at molar ratios of EO:salt in the range of 5-20 exhibit electrical conductivity values at 40$^{\circ}C$ of 2.4${\times}$10$\^$5/ and 1.1${\times}$10$\^$－5/ S/cm for DiPEG-HQ/LiCF$_3$SO$_3$ and DiPEG-BP/LiCF$_3$SO$_3$, respectively. At 80 $^{\circ}C$, these values are higher: 4.6${\times}$10$\^$－3/ and 1.1${\times}$10$\^$－4/ S/cm, respectively. The activation energy of conductivity depends strongly on the salt concentration.

• Journal of the Korean Ceramic Society
• /
• v.45 no.5
• /
• pp.290-296
• /
• 2008

$AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structures which have been reported as proton conductors over $600^{\circ}C$ were studied. The $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure is known to be more easily synthesized and has better stability than normal $ABO_3$ perovskite structure. And it is stable at about $800^{\circ}C$ in the $CO_2$ atmosphere, whereas the $BaCeO_3$ perovskite is easily decomposed into carbonate. In addition, this $AB'_{0.5}B"_{0.5}O_3$ type complex perovskite structure could simply produce oxygen vacancies within their structure not by introducing additional doping oxides but by just controling the molar ratio of $B'^{+3}$ and $B"^{+5}$ metal ions in the B site. Hence it is easy to design the structure which shows highly sensitive electrical conductivity to humidity. In this study, the single phase boundary of $BaR_{0.5+x}Ta_{0.5-x}O_{3-{\delta}}$(R = rare earth) complex perovskite structures and it's phase stability were investigated with changes in composition, x. And the humidity dependance of electrical conductivity at different $P_{H2O}$ conditions was investigated.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.263-271
• /
• 1995

Chemical assessment of soil pollution with heavy metals was made by analyzing the changes in pH, ionic strength, cationic concentration and chemical species in the soil solution. Saturated pastes of the unpolluted soils were made by adding solutions containing Cu or Cd and the final Cu or Cd concentrations were in the range of 0 to 400 mg/kg. After equilibrating for 24 hours at $25^{\circ}C$, the soil solution was extracted from the saturated pastes by the vacuum extraction method and analyzed for pH, electrical conductivity, Cu, Cd, cations and inorganic ligands. Chemical species in soil solution were calculated by the GEOCHEM-PC program employing the input variables of pH, ionic strength(${\mu}$), molar concentrations of cations and ligands. Increasing Cu or Cd additions lowered pH of the soil solution but increased concentrations of Ca, Mg and K resulting in increases of ${\mu}$ of the soil solution. Effects of Cu on lowering pH and increasing ${\mu}$ were greater than those of Cd. Concentrations of Cu or Cd in soil solution were relatively very low as compared to those of additions, but increased linearly with increasing additions representing that concentrations of Cu were higher than those of Cd. At 400 mg/kg additions, concentrations of Cu were in the range of 0.51 to 11.70 mg/L but those of Cd were 34.4 to 88.5 mg/L. Major species of Ca, Mg and K were free ions and these species were equivalent to greater than 95 molar % of the existing respective molar concentrations. These cationic species were not changed by Cu or Cd additions. Major species of Cu in lower pH soils such as SiCL and SL were free $Cu^{2+}$ (>95 molar %), but those in LS having a higher pH were free $Cu^{2-}$ and Cu-hydroxide complex. At 100 mg Cu/kg treatment, $Cu^{2+}$ and Cu-hydroxide complex were equivalent to 73 and 22.4 molar %, respectively. These respective percentages were decreased and increased correspondingly with increasing Cu treatments. Major species of Cd in soil solution were free $Cd^{2+}$ and Cd-chloride complex, representing 79 to 85 molar % for $Cd^{2+}$ and 13 to 20% for Cd-chloride complex at 10 mg Cd/kg treatment. With increasing Cd additions to 400 mg/kg, $Cd^{2+}$ species decreased to $40{\sim}47%$ but Cd-chloride complexes increased to $53{\sim}60$ molar %. These results demonstrated that soil contamination with heavy metals caused an adverse effect on the plant nutritional aspects of soil solution by lowering pH, increasing cations temporarily, and increasing free metal concentrations and species enough to be phytotoxic.

• Journal of Environmental Health Sciences
• /
• v.20 no.3
• /
• pp.31-38
• /
• 1994

Dithiocarbamates containing polar groups which give very water soluble metal complexes were prepared from the reaction of carbon disulfide with diamines. The compounds have been characterized by elemental analysis, molar conductivity, and spectroscopic results. Dithiocarbamate and its complex were soluble in water. N, N-Dimethylammoniumpropylenedithiocarbamate(A) is clearly effective as inhibition of cis-platinum nephrotoxicity in rats. From the result of A rescue after cis-dichlorodiammineplatinum(II) treatment, it is suggested that dithiocarbamate removes platinum(II) coordinated to -SH groups bound to protein of kidney tubule cells by the reaction of platinum(II) with dithiocarbamate injected. A is effective as antidots for acute cadmium poisoning in Bacillus subtills. Growth of Bacillus subtills may be accelerated by A ligand dissociated from cadmium (II)-A complex.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.12
• /
• pp.1757-1763
• /
• 2004

A new series of nickel(II), cobalt(II)/(III) and copper(II) complexes of 14, 15 and 16-membered of macrocyclic ligands have been prepared and characterized by elemental analyses, IR, UV-VIS and $^1H-NMR$ spectra, magnetic susceptibilities, conductivities, DTA and ESR measurements. Molar conductances in DMF solution indicate that, the complexes are nonelectrolytes except (9-12) complexes. The electronic spectra show that, all complexes are square planar or distorted octahedral geometry. The ESR spectra of solid complexes (4), (8) and (11) show square planar of axial type symmetry $(d_{x2-y2})$ with considerable covalent bond character. However, complex (12) shows a spectrum of octahedral geometry with $d_{z2}$ ground state. Complex (12) shows exploitation in reducing the amount of electron adducts formed in DNA during irradiation with low radiation products.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.926-931
• /
• 2011

A series of complexes of the type [$ML_2Cl_2$], where L=2-(o-anisylidene-2'-imino) amino benzimidazole (AIAB) and 2-(furfurylidene imino) amino benzimidazole (FIAB), M=Cu(II), Co(II), Ni(II) and Zn(II), have been synthesized and characterized on the basis of elemental analysis, thermal analysis, molar conductivity, magnetic moment, electronic, infrared, $^1H$-NMR spectral studies. The results are in consistent with bidentate chelation of ligand with azomethine nitrogen and ring nitrogen donors. All these Schiff bases and their complexes have also been screened for their antibacterial (Bacillus subtilis, Bacillus stearothermophilus, Escherichia coli and Salmonella typhi) and antifungal activities (Aspergillus niger and Aspergillus flavus).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.7
• /
• pp.1583-1587
• /
• 2009

The four dentate $N_2O_2$ Schiff base ligand of bis(2-hydroxyacetophenone)-1,2-propanediimine (BHAPN) and its manganese (III) complex were synthesized and identified by microanalysis, spectral data ($^1H$ NMR, MS, FT-IR and UV-Visible) and molar conductivity measurement. The mild and efficient homogeneous oxidative decarboxylation of some carboxylic acids by catalytic amount of this manganese (III) complex, using tetrabutylamonium periodate as a mild oxidant in chloroform at room temperature is reported. The catalyst used in this study showed good activity for the decarboxylation of the titled compounds.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.1
• /
• pp.60-68
• /
• 2011

[ $ZrO_2-TiO_2$ ]binary oxides with various Zr:Ti molar ratios were prepared by sol-gel method and Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membranes were fabricated for proton exchange membrane fuel cells (PEMFCs) at high temperature and low humidity. Water uptake, Ion exchange capacity (IEC), and proton conductivity of Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membranes were characterized and these composite membranes were tested in a single cell at $120^{\circ}C$ with various relative humidity (R.H.) conditions. The obtained results were compared with the unmodified membranes (Nafion$^{(R)}$ 112 and Recast Nafion$^{(R)}$). A Nafion$^{(R)}$/$ZrO_2-TiO_2$ composite membrane with 1:3 of Zr:Ti molar ratio showed the highest performance. The performance showed 500 mW/$cm^2$ (0.499V) at $120^{\circ}C$, 50% R. H., and 2 atm.