• 한국산림과학회지
• /
• 제4권1호
• /
• pp.33-38
• /
• 1965

It has already been noted that some tree species, denoted as tolerant species, endure to behavior shadiness in growth than those species, denoted as intolerant species, since this fact of tolerance must be involved in silvicultural practice, the present author, with pinus rigida, pinus Thunbergii, and Buxus koreana, investigated the relation of degree of shadiness to soil moisture condition. Because tolerant and intolerant trees must be considered from the standpoint of their ability to use any of the factors that are likely to be at low concentration in the dense or open forest. The observed results may be summarized as follows : 1. The ability of tolerance of the species to shadiness is differently concluded by the base with which the analysis was made, i.c. Height, growth, diameter growth, T-R ratio or dry matter increase and so on. Regarding this point root collar increment or dry matter increase were considered more reasonable bases for discussing the tolerability. 2. When total length growth, including both stem and root, is taken as standard for the comparison of the ability of tolerance for each species, higher soil moisture condition and thicker shadeniss lessened the ability of pinus rigida, seedlings. Pinus Thunbergii, showed. However more moisture resistant than pinus rigida. Buxus koreana, seemed to have stronger ability of tolerance than any others. 3. When total dry matter content taken as standard, the results obtained are given in Fig, 3. In pinus rigida, the soil moisture supplemented the lack of light.

• 한국환경복원기술학회지
• /
• 제18권2호
• /
• pp.45-52
• /
• 2015

Cool-season turfgrass is a rapidly increasing of usage for the revegetation of waterside slopes in dams, lakes and rivers. The purpose of this research is to identify the flooding tolerance of cool-season turfgrass with respect to the flooding periods of 0(control), 2, 4 and 6 days, respectively. The surface coverage ratio, turfgrass injury and soil moisture content were measured to assess the flooding tolerance of cool-season turfgrass. The increase in the flooding periods with 4 and 6 days resulted in the lower surface coverage ratio for cool-season turfgrass while no significant difference was found in the 2 days flooding when compared to 0 day (the control plot) flooding plot. In case of the turfgrass injury and the soil moisture content, however, the higher values were found with the increase of flooding periods in 2, 4 to 6 days. We observed that the higher the turfgrass injury and soil moisture content increased, the lower the surface covrage ratio decreased. In these regards, we also observed that the tolerance of cool season turfgrass were high in the 2 days flooding condition, medium in the 4 days flooding condition and low in the 6 days flooding condition. The flooding tolerance of cool-season turfgrass was gradually weakened in over 2 days flooding periods due to $O_2$ deficiency in the anaerobic soil condition. Therefore, we could suggest cool-season turfgrass within 2 days flooding periods for the revegetation of waterside slopes in dams, lakes and rivers.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.165-165
• /
• 2017

Abiotic stress is one of the major serious limiting factors in rice (Oryza sativa) and caused rice production losses. It is important to precisely screen valuable genetic resources for improving stress tolerance and understanding tolerance mechanism to abiotic stresses. Because there are differences of experiment designs for screening of tolerant plant in several studies related to abiotic stress, this study has performed to provide the rapid and efficiency screening method for selection of tolerance rice to drought and salinity stresses. Two week-old rice seedlings that reached about three leaf stage were treated with drought and salinity stresses and examined tolerant levels with tolerant and susceptible control varieties, and transgenic plants. To determine the optimum concentration for the selection of drought and salinity condition, tolerant, susceptible and wild-type plants were grown under three soil moisture contents (5, 10 and 20% water contents) and three NaCl concentrations (100, 200 and 250 mM) for 10 days at seedling stage. 200 mM NaCl concentration and 5% moisture content soil were determined as the optimum conditions, respectively. The described methodologies in this study are simple and efficiency and might help the selection of drought and salinity tolerance plants at the 3,4-leaf-seedling stage.

• 한국산림과학회지
• /
• 제112권4호
• /
• pp.442-450
• /
• 2023

본 연구는 죽절초의 현지외 보존 전략 수립을 위해 종자의 건조 내성과 저장성에 관한 정보를 얻고자 수행되었다. 이를 위해 죽절초 종자의 기본적인 발아 특성을 조사하고, 종자 함수율을 수준별로 조절하여 발아 특성 및 종자 침출수를 분석하였으며, 저장성 평가를 위해 저장 기간별 발아 특성을 조사하였다. 죽절초 종자의 탈종 직후 함수율은 32.8%였으며, 채취 직후의 종자는 함수율 4.8% 수준에서도 발아율 81.0%로 종자 활력과 종자세를 유지하였으나, 함수율 2.3%, 2.2%에서는 발아율이 각각 55.0%, 30.0%로 감소하였다. 반면, 저장된 종자는 함수율 18.6%에서 발아율이 93.3%로 높은 활력과 종자세를 유지하였으나, 함수율 5% 미만에서는 발아율이 20%이하로 활력과 종자세가 크게 감소하였다. 또한, 수준별로 건조한 종자의 침출수를 분석한 결과, 건조에 의해 발아 활력이 저하된 종자는 침출수의 전기전도도가 높게 나타났고, 침출수 내 K, Ca와 같은 무기질의 농도도 증가하였다. 결론적으로, 죽절초 종자는 난저장성 종자와 중간저장성 종자 사이의 건조 내성을 가지나, 노화 정도에 따라 건조 내성에 차이가 있고, 저장 수명이 짧은 단명종자로 판단된다.

• Journal of Electrochemical Science and Technology
• /
• 제15권4호
• /
• pp.437-458
• /
• 2024

The grave concern on the safety of Li-ion batteries adopted in commercial electrical vehicles pushes an urgent demand for developing safer all-solid-state batteries (ASSBs), where ion-conducting solid electrolytes play pivotal roles. Much higher conductivity and more ductile nature of sulfide-based electrolytes offers great advantages over conventional oxide materials in terms of manufacturing process difficulty and the battery performance. However, instability of sulfide materials towards atmospheric moisture results in the substantial degradation in the ionic conductivity and the release of hazardous gas. After over a decade of intensive research, various customized strategies based on the specific design rules were developed for each electrolyte to tackle this crucial issue. However, in most cases a moisture tolerance was endowed only after compromising its vital ionic conductivity to some extent. Nevertheless, the actual applications of sulfide electrolytes to ASSBs often lead to improved battery performance by virtue of the interfacial stabilization between oxide-based cathode materials and sulfide-based solid electrolytes. Therefore, it is essential to fully comprehend the critical factors of each atmospheric stabilization technology that potentially affects the eventual battery performance. Herein, we go over the current status of state-of-the-art moisture-stabilizing technologies for each sulfide-based solid electrolyte, summarizing the major effect of each technology on the various aspect of the electrochemical performance upon application. We believe that this review will contribute to achieving effective moisture-stabilization of sulfide-based solid electrolytes, catalyzing the successful commercialization of sulfide-based ASSBs.

• 한국유기농업학회지
• /
• 제24권4호
• /
• pp.787-795
• /
• 2016

The purpose of this study was to assess drought tolerance of groundcover plants for extensive green roof. Form July to November 2013, plant height, chlorophyll content, soil moisture, evapotranspiration and survival rate was measured. As results, after unirrigation started, Aster koraiensis reached 0% of soil moisture earliest followed by Sedum kamtschaticum, Hemerocallis fulva, Hylotelephium spectabile, Iris sanguinea, Hosta longipes and control. Among the plants, A. koraiensis withered earliest on 19th day of unirrigation experiment, followed by H. longipes and H. fulva (27th day); and I. sanguinea (29th day). S. kamtschaticum and H. spectabile survived even after 120th day of the experiment. As for chlorophyll content, I. sanguinea showed constant values in early stage than rapidly decreased right before its withering. Chlorophyll content of A. koraiensis and H. fulva showed rapid decrease from the beginning, while that of H. spectabile and S. kamtschaticum showed continuous reduction for first 30 days and the reduction was slowed down since then. In conclusion, H. longipes, I. sanguinea and H. fulva were found most applicable for extensive green roof considering scenic aspect.

• 한국연초학회지
• /
• 제1권1호
• /
• pp.39-45
• /
• 1979

극단의 土壤水分( 4 %, 24% )과 溫度(33$^{\circ}C$, -2$^{\circ}C$)에서 뿌리혹線筮의 生存率을 조사한 결과 土壤水分 함량에 따른 차이는 인정되지 않았고, 溫度 處理의 경우 33$^{\circ}C$에서는 Meloidogyne incognita, -2$^{\circ}C$에서는 M. hapla의 생존율이 높았으며, M. arenaria는 兩 處理에서 양자의 중간 정도의 반응을 보였다. 低溫처리에서 tolerance의 증가는 모든 線筮에서 인정되었으며 특히 M. hapla의 tolerance가 가장 높았다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.198-198
• /
• 2022

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.67-78
• /
• 1990

This study was performed to determine the characteristics of physical and mechanical properties of domestic wood based materials; plywood, particleboard, medium density fiberboard. Main items of tested properties were panel size, moisture content, water absorption, linear expansion and thickness swelling, glue bond shear strength, bending properties(stress at proportional limit, modulus of rupture. modulus of elasticity), tensile strength, screw holding strength, and internal bond as neccessary. the results were discussed mainly with Korean Standards. The obtained conclusions are as follows; 1. Length and width of 3mm thin plywood(3-ply) and 12mm thick plywood(7-ply) were satished with KS-standard, but thicknesses of these panels were not- passed tolerance limit except one of eight makers. 2. Length and width of particleboard and medium density fiberboard were greater than the tolerance limit value of KS standard, but the thicknesses of these panels were passed this value. 3. Moisture contents of 12mm thick and 3mm thin plywood were satisfied with KS-standard except one mill made 3mm thin plywood. 4. Moisture absortion of plywood was not passed tolerance limit of KS-standard but particleboard was satisfied with this standard value. 5. Dry and wet shear strengths in glue bond of 3mm thin plywood were not reached to KS-standard, but those of 12mm thick plywood were sufficiently satisfied with KS standrad. 6. Modulus of ruptures, parallel to grain and perpendicular to grain of plywood, and particleboard and medium density fiberboard were satisfied with KS-standard. 7. Tensile strengths, parallel to grain and perpendicular to grain of plywood were satisfied with allowance stress of US product standard PS 1-74. 8. Screw holding strength of particleboard was not reached to KS standard, but internal bond was satisfied with KS standard.

• 현장농수산연구지
• /
• 제21권1호
• /
• pp.41-48
• /
• 2019

This study was carried out to establish a proper cultivation site and to diagnose the drought tolerance of Oplopanax elatus leaves by using pressure-volume curves. As a result of analysing data measured, the leaf of Oplopanax elatus showed the osmotic pressure at full turgor(Ψosat) was -0.77 MPa, and the osmotic pressure at incipient plasmolysis(Ψotlp) was -0.90 MPa. Then, the value of maximum bulk modulus of elasticity Emax was 3.7 MPa, showing that slightly lower drought tolerance of Oplopanax elatus. Furthermore, the values of relative water contents RWCtlp and RWC^* were above 80%, showing that the function of osmoregulation is somewhat better. Thus, responses to water relations such as Ψosat, Ψotlp, Emax, RWCtlp and RWC^* of Oplopanax elatus showed relatively lower drought-tolerance property indicating that those growth are appropriate in high moisture soil sites.