• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.95-105
• /
• 2007

A mathematical modeling for the drying process of hygroscopic porous media, such as wood, has been developed in the past decades. The governing equations for wood drying consist of three conservation equations with respect to the three state variables, moisture content, temperature and air density. They are involving simultaneous, highly coupled heat and mass transfer phenomena. In recent, the equations were extended to account for material heterogeneity through the density of the wood and via the density variation of the material process, capillary pressure, absolute permeability, bound water diffusivity and effective thermal conductivity. In this paper, we investigate the drying behavior for the three primary variables of the drying process in terms of control volume finite element method to the heterogeneous transport model on one-dimensional grid.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.239-245
• /
• 2010

Breathable waterproof PET fabrics were prepared by the UV coating of UV-curable polyurethaneacrylate(PUA) formulation mixed with polyethyleneglycol(PEG) as a water soluble pore former. The dispersed PEG in the UV-cured coating was extracted by warm water, which can generate individual circular pores uniformly distributed all over the coating instead of pore channels. Accordingly the moisture permeability of the microporously coated fabrics increased substantially with increasing PEG addition without significant reduction of hydrostatic pressure. Also the silicone diacrylate addition in the formulation was beneficial in increasing the hydrostatic pressure. The UV-based microporous coating can be an alternative to conventional thermal curing of solventborne polyurethane coating owing to the enhanced environment friendliness and energy saving.

• 한국농공학회지
• /
• 제43권5호
• /
• pp.132-144
• /
• 2001

Iln order to figure out criteria of bentonite for using as impervious material of waste landfill, laboratory experiments were performed to reveal the geotechnical properties of soil-bentonite mixtures such as compaction test, direct shear test, unconfined compression test, triaxial compression test, consolidation test and permeability test. The results of the study are summarized as follows ; 1. Based on the compaction test, optimum moisture content increased with the increase of bentonite content, but maximum dry density decreased. 2. In unconfined compression test, the maximum strength of the soil-bentonite mixtures appeared at 10% bentonite content. The correlation equation between stress($\sigma$) and strain($\varepsilon$) of the soil-bentonite mixtures is given by ; $\sigma=\frac{a\cdot\varepsilon}{\varepsilon^n+b}$ 3. In shear test of the mixtures. the shear strength showed an increasing trend with increase of bentonite content and the maximum shear strength appeared at 10% bentonite content. 4. In consolidation test, the coefficient of compressibility $(a_v)$$(m_v)$$(C_v)$

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).

• Fibers and Polymers
• /
• 제6권2호
• /
• pp.113-120
• /
• 2005

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate) (PIT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss $(\%)$ measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain $(\%)$ enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.433-436
• /
• 2005

Chitosans were obtained with varying deacetylation times using the ${\beta}$-chitin isolated from Todarodes pacificus, and their deacetylation degrees and average molecular weights were determined. Films prepared with the squid chitosans were characterized by estimating their tensile strengths, percent elongations, water vapor permeabilities, degree of swelling, and temperatures of glass transition and thermal decomposition. The results suggest that the squid chitosan films were comparable to common crustacean chitosan films in regard of mechanical, moisture barrier, and thermal properties, although further, multilateral investigations are necessary to make a more definitive conclusion.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.213-214
• /
• 2021

External insulation method is used to conserve energy of buildings. However, the current external insulation method uses organic insulating materials to become a diffusion path in case of fire. In this study, the purpose of this study is to provide basic data on the required performance of the plastering material according to the CaCO₃ powder addition of the finishing material of the external insulation method. In Figure 1, when powder was added, the adhesion strength decreased by 30% to 35% at 10% and 0% to 50% at 20% compared to Plain. In Figure 2, the moisture permeability increases approximately twice when powder is added. The results for the water absorption coefficient are shown in Figure 3.

• 한국지반공학회논문집
• /
• 제15권2호
• /
• pp.43-71
• /
• 1999

본 연구는 하수처리장 슬러지를 사용하여 매립지의 복토재 및 차수재의 건설재료로 개발하기 위하여 수행한 실험의 분석결과이다. 하수슬러지에 그의 지반공학적 물성증진을 위하여 화강토와 화력발전소의 부산물인 플라이애쉬를 주첨가물로 사용하고 부첨가물로 시멘트 및 벤토나이트를 소정의 혼합비율로 섞어서 각각 전단강도 증진과 투수계수 감소효과를 도모하였다. 주재료인 하수슬러지와 첨가재의 혼합비율을 변화시킨 혼합물에 대하여 다양한 실내실험을 수행하여 복토재 및 차수재의 설계기준의 적합성 여부를 조사하였다. 각 주재료, 첨가재, 혼합물의 비중, 입도분석, 액\ulcorner소성한계 실험을 실시하여 기본물성을 구하고 그들이 투수성, 다짐성, 압축성, 전단강도에 미치는 영향에 대하여 분석하였다. 혼합물에 대하여 실내다짐시험을 실시하여 최대건조단위중량과 최적함수비를 구하고 현장 다짐효율성을 평가하였다. 다짐혼합시료에 대하여 변수두 투수시험을 실시하여 투수계수를 구하는 한편 변수두 투수시험을 하중제어식 압밀시험중에 병행 실시하여 그들의 압밀정수 및 투수계수를 측정하였다. 슬러지의 장기적 안정성과 관련하여 크리프실험을 변수두 투수시험과 함께 실시하였다. 한편, 한달간을 부패시킨 다짐시료에 대하여 투수시험을 실시하여 슬러지내 유기물질 부패에 의한 투수계수에 미치는 영향에 대하여 고찰하였다. 슬러지에 화강토, 플라이애쉬, 벤토나이트를 일정비율로 섞은 혼합물에 대하여 직접전단시험을 실시하여 전단강도정수를 구하였다. 시멘트와 혼합한 슬러지에 대하여 일축압축 강도시험을 실시하여 혼합비와 재령기간에 따른 압축강도 변화를 분석하였다. 한편, 다짐혼합시료에 대하여 CBR시험을 수행하여 그들의 주행성에 대한 평가를 실시하였다. 이와 같은 다양한 실험결과를 종합분석하여 매립지의 차수재 및 복토재로서 사용조건 만족여부를 검토하였다.

• 한국농공학회지
• /
• 제13권4호
• /
• pp.2456-2470
• /
• 1971

수수자원(水水資源) 개발(開發)을 위(爲)한 Earth Dam이나 도로(道路)와 같은 흙을 주(主)로하는 많은 구조물축조(構造物築造)에 있어서 그 구조물성질(構造物性質)에 따라서 흙의 종류(種類)가 결정(決定)되며 때로는 흙의 성질(性質)에 따라서 구조물(構造物)의 설계(設計)가 달라진다. 특(特)히 저수(貯水)를 목적(目的)으로 하는 제당축조(堤塘築造)에서 중심점토재료(中心粘土材料)의 선정(選定)은 완전(完全)한 구조물(構造物)을 위(爲)해서 또 공사비(工事費) 절감(節減)을 위(爲)해서 대단(大端)히 중요(重要)한 문제(問題)라 하겠다. 이를 위해서 여러종류(種類)의 흙이 사용(使用)되고 있고 이들 흙의 제반(諸般) 역학적(力學的) 성질(性質)이 이미 실시(實施)된 많은 시험결과(試驗結果)로서 실제(實際) 설계(設計)에, 또 구조물(構造物) 안전도(安全度) 검토(檢討)에 응용(應用)되고 있으나 이들 결과(結果)는 그 흙의 최적함수비(最適含水比) 최대밀도(最大密度)에 대(對)한 것으로 실제(實際) 시공과정(施工過程)에서 볼 때 최과함수상태하(最過含水狀態下)에서 시공(施工)하기는 어려운 것으로 이런 경우(境遇)에 흙의 역학적성질(力學的性質)에 대(對)한 자료(資料)가 없어 설계(設計) 및 안전도(安全度) 검토(檢討)에 지장(支障)이 많은바 이를 위해서 본(本) 시험(試驗)을 실시(實施)하였다. 1. 시험(試驗)에 사용(使用)한 시료(試料)는 실제(實際) 저수지(貯水池) 축제재료(築提材料)로서 사용(使用)하고 있는 재료(材料)를 현장(現場)에서 채취(採取)하였다. 2. 본(本) 시험(試驗)은 농업진흥공사(農業振興公社) 농공시험소(農工試驗所)에서 실시(實施)하였다. 3. 본(本) 시험(試驗) 결과(結果)로서 다음과 같은 점(點)을 실제업무(實際業務)에 응용(應用)할 수 있다. 가. 현장함수비(現場含水比)를 알므로서 공사재료(工事材料)로서의 적부판단(適否判斷)을 내릴수 있다. 나. 함수비(含水比)가 변화시(變化時) 다짐율(率)과 투수계수(透水係數)를 알 수 있으므로 실제설계(實際設計) 및 시공관리(施工管理)에 적용(適用)할수 있다. 다. 시공(施工)된 구조물(構造物)의 다짐율(率)을 알므로서 이에 적합(適合)한 안정도검토(安定度檢討)를 할수 있다. 라. 도로(道路)와 같은 높은 지내력(支耐力)을 요(要)하는 구조물(構造物)을 위(爲)해서는 최적함수비(最適含水比) 내지 건조상태(乾燥狀態)가 좋고 저수지(貯水池)와 같은 지수(止水)를 요(要)하는 구조물(構造物)에서는 최적함수비(最適含水比) 내지 습윤상태(濕潤狀態)로 시공(施工)함이 좋다. 그러나 고소성(高塑性) 흙에서는 지내력(支耐力) 및 지수(止水)를 위해서 공(共)히 후자(後者)의 경우(境遇)가 좋다. 이상(以上)의 연구결과(硏究結果)가 완벽(完璧)하다고는 할수 없으나 본(本) 실험(實驗) 결과(結果)로서 함수비(含水比) 변화(變化)에 대(對)한 제반(諸般) 역학적(力學的) 성질(性質)의 변화상태(變化狀態)를 구(求)하기에 최선(最善)을 하였으므로 이 분야(分野)의 연구자(硏究者)나 설계자(設計者) 또는 시공자(施工者)와 같은 실무자(實務者)에게 다소(多少)의 도움이 된다면 큰영광(榮光)으로 생각 하겠다.

• Geomechanics and Engineering
• /
• 제14권3호
• /
• pp.247-255
• /
• 2018

Soil stabilization can make the soils becoming more stable by using an admixture to the soil. Lime stabilization enhances the engineering properties of soil, which includes reducing soil plasticity, increasing optimum moisture content, decreasing maximum dry density and improving soil compaction. Silica fume is utilized as a pozzolanic material in the application of soil stabilization. Silica fume was once considered non-environmental friendly. In this paper, the materials required are kaolin grade S300, lime and silica fume. The focus of the study is on the determination of the physical properties of the soils tested and the consolidation of kaolin mixed with 6% silica fume and different percentages (3%, 5%, 7% and 9%) of lime. Consolidation test is carried out on the kaolin and the mixtures of soil-lime-silica fume to investigate the effect of lime stabilization with silica fume additives on the consolidation of the mixtures. Based on the results obtained, all soil samples are indicated as soils with medium plasticity. For mixtures with 0% to 9% of lime with 6% SF, the decrease in the maximum dry density is about 15.9% and the increase in the optimum moisture content is about 23.5%. Decreases in the coefficient of permeability of the mixtures occur if compared to the coefficient of permeability of kaolin soft clay itself reduce the compression index (Cc) more than L-SF soil mix due to pozzolanic reaction between lime and silica fume and the optimum percent of lime-silica fume was found to be (5%+6%) mix. The average coefficient of volume compressibility decreases with increasing the stabilizer content due to pozzolanic reaction happening within the soil which results in changes in the soil matrix. Lime content +6% silica fume mix can reduce the coefficient of consolidation from at 3%L+6%SF, thereafter there is an increase from 9%L+6%SF mix. The optimal percentage of lime silica fume combination is attained at 5.0% lime and 6.0% silica fume in order to improve the shear strength of kaolin soft clay. Microstructural development took place in the stabilized soil due to increase in lime content of tertiary clay stabilized with 7% lime and 4% silica fume together.