• 제목/요약/키워드: Moisture Resistant

검색결과 91건 처리시간 0.029초

수분-열처리와 노화에 의해 고아밀로오스 옥수수전분으로부터 형성된 효소저항전분의 특성비교 (Comparison of Enzyme Resistant Starches Formed during Heat-Moisture Treatment and Retrogradation of High Amylose Corn Starches)

  • 권미라;신말식
    • Applied Biological Chemistry
    • /
    • 제40권6호
    • /
    • pp.508-513
    • /
    • 1997
  • 고아밀로오스 옥수수전분인 Hylon V와 Hylon VII을 사용하여 수분-열처리 및 노화하고 효소저항 전분을 분리하여 열적 특성 및 입자 형태를 각각 DSC와 현미경으로 조사하였다. 처리 후 효소저항 전분의 수율은 두 전분이 비슷한 경향으로 증가하였으나 아밀로오스 함량이 높은 Hylon VII이 Hylon V보다 더 높았다. 특히 수분-열처리에 의해 효소저항성이 크게 증가되어 생전분과 수분-열처리 전분의 효소저항 전분 수율은 Hylon V의 경우는 11.4%에서 26.6%로, Hylon VII의 경우는 15.9%에서 32.8%로 증가하였으나 노화전분은 생전분보다 약간 증가하였다. DSC에 의하면 수분-열처리로 호화온도가 증가되고 엔탈피가 감소하나, 노화된 전분은 $140^{\circ}C$ 근처에서 피크를 보였다. 생전분과 수분-열처리 전분에서 분리한 효소저항 전분은 폭넓은 곡선을 나타낸 반면, 노화전분에서 분리한 효소저항 전분은 $150^{\circ}C$ 근처에서 날카로운 피크를 나타냈다. 수분-열처리에 의해 전분 입자의 형태나 복굴절은 그대로 유지되었으나 노화전분은 호화 중에 용출된 아밀로오스에 의해 입자들이 서로 엉켜 있었다. 수분-열처리 전분에서 분리된 효소저항 전분은 요드 염색으로 남색을 보여 생전분이나 노화전분에서 분리된 효소저항 전분보다 효소저항성이 큼을 알 수 있었다.

  • PDF

몬순기후형 중온 개질 아스팔트 혼합물의 역학적 물성 평가 연구 (Evaluation on Mechanical Properties of Polymer-Modified Warm-Mix Asphalt Mixtures for Monsoon Climate Regions)

  • 이강훈
    • 한국도로학회논문집
    • /
    • 제19권5호
    • /
    • pp.131-141
    • /
    • 2017
  • PURPOSES : The main distress of asphalt pavements in monsoon climate regions are caused by water damage and plastic deformation due to repeated rain season and increased heavy vehicle traffic volume. In this study, the mechanical properties of polymer-modified warm mix asphalt (PWMA) materials are evaluated to use in monsoon climate regions such as Indonesia. METHODS : Comprehensive laboratory tests are conducted to evaluate moisture resistance and permanent deformation resistance for three different asphalt mixtures such as the Indonesian conventional hot-mix asphalt (HMA) mixture, the polymer-modified asphalt mixture, and the polymer-modified warm mix asphalt (PWMA) mixture. Dynamic immersion test and indirect tensile strength ratio test are performed to evaluate moisture resistance. The wheel tracking test is performed to evaluate rutting resistance. Additionally, the Hamburg wheel tracking test is performed to evaluate rutting and moisture resistances simultaneously. RESULTS :The dynamic immersion test results indicate that the PWMA mixture shows the highest resistance to moisture. The indirect tensile strength ratio test indicates that TSR values of PWMA mixture, Indonesian PMA mixture, and Indonesian HMA mixture show 87.2%, 84.1%, and 67.9%, respectively. The wheel tracking test results indicate that the PWMA mixture is found to be more resistant to plastic deformation than the Indonesian PMA. The dynamic stability values are 2,739 times/mm and 3,150 times/mm, respectively. Moreover, the Hamburg wheel tracking test results indicate that PWMA mixture is more resistant to plastic deformation than Indonesian PMA and HMA mixtures. CONCLUSIONS :Based on limited laboratory test results, it is concluded that rutting resistance and moisture susceptibility of the PWMA mixture is superior to Indonesian HMA and Indonesian PMA mixtures. It is postulated that PWMA mixture would be suitable for climate and traffic conditions in Indonesia.

과부하 및 경년 변압기 절연유 열화 특성 분석 연구 (Analysis of Aging Characteristics in Oil Immerged Pole Transformer)

  • 이병성;송일근;이재봉;박동배;한상옥
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
    • /
    • pp.203-207
    • /
    • 2002
  • In order to evaluate the aging of mineral oil immersed distribution transformers, it gathered some insulation oil in over loaded and long time(exceed their service life, 13yrs.) aged transformers in the field, we measured moisture content, acid number, dielectric strength of the oil as defined in KS C 2101 standard. And also, it had been measured dielectric constant, specific resistant, $tan{\delta}$ on aged transformer oil at from $10^{\circ}C$ to $130^{\circ}C$. These results are compared with a new mineral oil. From this study, it can be considered that the analysis of mineral oil may be suitable for evaluation of life expectancy in distribution transformers

  • PDF

Morphological Characteristics of Ginseng Leaves in High-Temperature Injury Resistant and Susceptible Lines of Panax ginseng Meyer

  • Lee, Joon-Soo;Lee, Kyung-Hwan;Lee, Sung-Sik;Kim, Eun-Soo;Ahn, In-Ok;In, Jun-Gyo
    • Journal of Ginseng Research
    • /
    • 제35권4호
    • /
    • pp.449-456
    • /
    • 2011
  • Plant leaf cuticle is related to the prevention of moisture loss, transpiration, and diffusion of light reflection. The purpose of this study was to examine the morphological characteristics of ginseng leaves in ginseng plants resistant and susceptible to hightemperature injury (HTI) to be related with the leaf-burning. For the HTI resistant lines Yunpoong, high-temperature injury resistance (HTIR) 1, HTIR 2, and HTIR 3, and the HTI-susceptible line Chunpoong, the cuticle densities were 53.0%, 46.2%, 44.9%, 48.0%, and 17.0%; the adaxial leaf cuticle layers were 141.3, 119.7, 119.7, 159.4, and 85.0 nm in thickness; the abaxial leaf cuticle layers were 153.6, 165.8, 157.9, 199.6, and 119.4 nm in thickness; and the stomtal lengths were 21.7, 32.4, 29.4, 30.9, and $21.8{\mu}m$, respectively. All of these aspects suggest that HTI resistant lines have higher cuticle density, thickicker adaxial and abaxial leaf cuticle layers, and longer of stomta length than the HTI-susceptible line, protecting leaves from moisture loss and excessive transpiration under high temperatures to be resistant against the leaf-burning.

수분공급조절이 질경이 ( Plantago asiatica L. ) 의 생장에 미치는 영향 (Effects of Different Soil Moisture on the Growth of Plantago asiatica L.)

  • Lee, Ho Joon;Soon Ja Kim;Hae Won Kang
    • The Korean Journal of Ecology
    • /
    • 제6권3호
    • /
    • pp.227-235
    • /
    • 1983
  • This research was made over drought resistance and optimum soil moisture needed with Plantago asiatica L. as the material by means of making out the process of its growth under different soil moisture contents. The soil used for the experiment was a mixture of vermiculite and c-layer soil, and the process of growth was compared with each other controlling its soil mositure as: 7%, 15%, 30%, 45%, and 60%. In 7% range of soil moisture which was of low content, the increase of growth was neither significantly indicated nor any permanent seeding done. In view of this phenomenon, Plantago asiatica L. appeared to be highly drought-resistant. It was found rising at 30% range and reaching the optimum state at 45% range and falling down at 60% range range. In viw of this fluctuation indicated above, the optimum soil moisture content needed for the growth of Plantago asiatica L. is thought to be between 30% and 60%. It is thought the number of seed per capsule is not affected by the soil moisture content. It is expected an ecotypic variation by the soil moisture content will bring forth upon Plantago asiatica L.

  • PDF

압출성형공정과 건조조건이 옥수수전분의 저항전분 수율에 미치는 영향 (Effects of Processing Parameters of Twin Screw Extruder and Dry Methods on the Resistant Starch Formation from Normal Maize Starch)

  • 신말식;문세훈;배천호
    • 한국가정과학회지
    • /
    • 제5권1호
    • /
    • pp.62-70
    • /
    • 2002
  • The objective of this study was to evaluate the effects of processing parameters of co-rotating twin screw extruder and dry methods on the level of resistant starch (RS) and the properties of extrudate prepared from normal maize starch. The processing parameters were used 90, 110, 130$^{\circ}C$ in temperature, 25.0~30.0% in moisture content, 150, 200, 250 rpm in screw speed and hot and cool air drying and drying after refrigerating in drying methods. The barrel temperature and drying methods had affected the level of resistant starch of extrudate. RS levels of extrudates were ranged from 2.4 to 15.5% by AOAC method. The extrudates, extruded at 110$^{\circ}C$ and then stored at 4$^{\circ}C$, showed the highest level of RS level (15.5%). Water absorption index increased with increasing moisture content and peak temperatures and viscosities of extudates decreased compare to that of raw starch from 94$^{\circ}C$ to 50~65$^{\circ}C$ and from 220 to 46~98 RVU, respectively. Extudates treated in 90$^{\circ}C$ and 110$^{\circ}C$ showed strong peak at $2{\theta}=6.7{\sim}17.0^{\circ}$ by X-ray diffractometry and had ~150$^{\circ}C$ endotherm like as that of RS3 starch by differential scanning calorimetry. In case of 130$^{\circ}C$, extrudates showed strong peak at $2{\theta}=20.0^{\circ}$ and had 106$^{\circ}C$ endotherm.

  • PDF

세리신 가공제에 의한 폴리에스터 직물의 친수화 가공 (Hydrophilic Finish of Polyester Fabrics using Sericin Finishing Agents)

  • 박인우;황계순;홍영기;배한수;배기서
    • 한국염색가공학회지
    • /
    • 제21권1호
    • /
    • pp.38-45
    • /
    • 2009
  • First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30% of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

유채 내한성에 관한 연구 (Studies on the Cold Resistant in Rape, Brassica napus L.)

  • 김일해;권병선;이정일;유익상;김준기;이용보
    • 한국작물학회지
    • /
    • 제22권1호
    • /
    • pp.26-34
    • /
    • 1977
  • 27 lines were selected for the cold resistant lines from the promising lines. The cold resistant lines were chiefly selected from Oro$\times$Norin 16, Oro$\times$Norin 20 and (Yudal$\times$Kongo)$\times$Yudal combination. The varieties of lately maturing showed cold resistantce. Transplanting treatment increased cold resistantce, and early sowing and drill planting also elevated cold resistance in the direct sowing culture. Plants to be cultured on soils with optimum moisture coutent showed higher cold resistance.

  • PDF

Chemical Design of Highly Water-Soluble Ti, Nb and Ta Precursors for Multi-Component Oxides

  • Masato Kakihana;Judith Szanics;Masaru Tada
    • Bulletin of the Korean Chemical Society
    • /
    • 제20권8호
    • /
    • pp.893-896
    • /
    • 1999
  • Novel citric acid based Ti, Nb and Ta precursors that are highly stable in the presence of water were developed. No alkoxides of Ti, Nb and Ta were utilized in the preparation, instead much less moisture-sensitive metallic Ti, NbCl5 and TaCl5 were chosen as starting chemicals for Ti, Nb and Ta, respectively. The feasibility of these chemicals as precursors is demonstrated in the powder synthesis of BaTi4O9, Y3NbO7 and LiTaO3. The water-resistant Ti precursor was employed as a new source of water-soluble Ti in the amorphous citrate method, and phase pure BaTi4O9 in powdered form was successfully synthesized at 800 ?. The Pechini-type polymerizable complex method using the water-resistant Nb and Ta precursors was applied to the synthesis of Y3NbO7 and LiTaO3, and both the powder materials in their pure form were successfully synthesized at reduced tempera-tures, viz. 500-700 ?. The remarkable retardation of hydrolysis of these water-resistant precursors is explained in terms of the partial charge model theory.