• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2001

As important factors determining human sensorial comfort, liquid moisture management and surface properties of heat resistant workwear materials were examined. To figure out liquid moisture management properties of the test materials, absorption capacity, rate of absorption, and evaporation properties were assessed. A modified GATS(Gravimetric Absorbency Testing System) was used to measure the liquid moisture accumulation associated with the wicking of liquid moisture from sweating skin. The GATS procedure measures demand wettability of materials to take up liquid in a direction perpendicular to the fabric surface and it was modified to incorporate a special test cell and cover to assess absorption behavior in the presence of evaporation. Fabric stiffness, smoothness, number and the length of surface fibers, and an estimate of the contact area between the skin and fabric surface were measured to characterize the mechanical and surface properties of the test materials. Also an estimate of the force with which a fabric clings to moist skin was made using as wet-cling index.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.27-37
• /
• 2002

This study was investigated with the surface properties such as physical and accelerated tests of wood-based floorings. In physical test, hardness and abrasion resistance values of laminate floorings were higher than those of others. The center line average surface roughness($R_a$) of imported laminate flooring was highest value($1.34{\mu}m$) and that of imported solid wood flooring was lowest value($0.62{\mu}m$). In cold resistance and moist heat resistance, no defects were found on the surface of all flooring (crack, blistering, peeling, and gloss loss etc.) after testing. Wet-cold-dry cycle test showed that plywood flooring appeared some cracks. In accelerated weathering test, color difference increased with increasing Xenon arc light irradiation

• Restorative Dentistry and Endodontics
• /
• v.38 no.4
• /
• pp.234-240
• /
• 2013

Objectives: This study evaluated the effects of intraradicular moisture on the pushout bond strength of a fibre post luted with several self-adhesive resin cements. Materials and Methods: Endodontically treated root canals were treated with one of three luting cements: (1) RelyX U100, (2) Clearfil SA, and (3) G-Cem. Roots were then divided into four subgroups according to the moisture condition tested: (I) dry: excess water removed with paper points followed by dehydration with 95% ethanol, (II) normal moisture: canals blot-dried with paper points until appearing dry, (III) moist: canals dried by low vacuum using a Luer adapter, and (IV) wet: canals remained totally flooded. Two 1-mm-thick slices were obtained from each root sample and bond strength was measured using a push-out test setup. The data were analysed using a two-way analysis of variance and the Bonferroni post hoc test with p = 0.05. Results: Statistical analysis demonstrated that moisture levels had a significant effect on the bond strength of luting cements (p < 0.05), with the exception of G-Cem. RelyX U100 displayed the highest bond strength under moist conditions (III). Clearfil SA had the highest bond strength under normal moisture conditions (II). Statistical ranking of bond strength values was as follows: RelyX U100 > Clearfil SA > G-Cem. Conclusions: The degree of residual moisture significantly affected the adhesion of luting cements to radicular dentine.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.295-303
• /
• 2018

Inland wetlands in the Republic of Korea provide key breeding and wintering habitats, while coastal wetlands provide nutrient-rich habitats for stopover sites for East Asia/Australasia Flyway(EAAF) migrants. However, since the 1960's, Korea has reclaimed these coastal wetlands gradually for agriculture and urban expansion. The habitat loss has rippled across global populations of migrant shorebirds in EAAF. To protect a similar loss, the United States, specifically Missouri, developed the moist-soil management technique. Wetland impoundments are constructed from levees with water-flow control gates with specific soils, topography, available water sources, and target goals. The impoundments are subjected to a combination of carefully timed and regulated flooding and drawdown regimes with occasional soil disturbance. This serves a dual purpose of removing undesirable vegetation, while maximizing habitat and forage for wildlife. Flooding and drawdown schedules must be dynamic with constantly shifting climate conditions. Korea's latitude ($N33^{\circ}25^{\prime}{\sim}N38^{\circ}37^{\prime}$) is comparable to Missouri ($N36^{\circ}69^{\prime}{\sim}N40^{\circ}41^{\prime}$); as such, moist-soil management could prove to be an effective wetland restoration technique for Korea. In order to meet specific conservation goals (i.e. shorebird staging site restoration), it is necessary to test the proposed methodology on a site that can meet the required specifications for moist-soil management. Moist-soil management has the potential to not only create key habitat for endangered wildlife, but also provide valuable ecosystem services, including water filtration.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.5
• /
• pp.57-65
• /
• 2014

For economic and technical reasons, it is difficult to obtain high quality undisturbed cohesionless samples, hence most researchers rely on preparing remolded and reconstituted representative samples of sandy soils. In this study, moist tamping, air pluviation, and dry deposition methods were applied to make remolded samples at similar relative densities. A series of isotropically consolidated drained tests were conducted with accompanied by measured elastic wave velocities in order to evaluate a difference between sample preparation methods and relative densities. For the elastic wave velocity measurements, piezoelectric elements were installed on the top and bottom cap of the triaxial device. The results showed that soil behavior relies on sample preparation methods, and that the trend of shear wave velocity was the same with volumetric strain behavior.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.89-96
• /
• 1998

LOM (Laminated Object Manufacturing) process is one of rapid prototyping processes, where shapes are formed by accumulating cross sections of laser-cut paper. The process expects wide popularity since it is simple and the material is familiar to conventional mockup makers. However the dimensional accuracy of LOM parts is not so good as that of traditional wooden mockups, since the stack of adhesive-spread papers causes significant dimensional error. Also it is unclear how the other unknown environmental effects cause the errors as well. In this work the dimensional errors of LOM parts are measured and analysed. Experiments with test parts were performed in order to see the effects of part shape, moist, and sealer on dimensional variations. The characteristic of the paper is also analysed. Re-heating LOM parts, which is shown to have the effect of recovering dimensional changes, is applied to an example part.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.10a
• /
• pp.144-149
• /
• 1993

The results of an experimental study on the manufacture and the mechanical properties of carbon fiber reinforced silica fume.cement composites and light weight fly ash.cement composites are presented in this paper. The CF reinforced silica fume.cement composites using silica fume early strength cement were prepared with Pan-derived or Pitch-derived CF, and Lt. Wt, fly ash.cement composites using fly ash, early strength cement, perlite and a small amount of foaming agent. As the test results show, the flexural strength, toughness and ductility of CF reinforced silica fume .cement composites were remarkably increased by fiber contents. Also, the manufacturing process technology of Lt. Wt. fly ash.cement composites was developed and its optimum mix proportions were proposed. And the compressive and flexural strength of the fly ash.cement composites by hot water cured were improved even more than by moist cured, but are decreased by increasing fly ash replaced ratio for cement.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.17-24
• /
• 2017

PURPOSES : This study aims to develop a sealant for use in the installation of Weigh-In-Motion (WIM) sensor for asphalt concrete or cement concrete pavements. METHODS : In order to investigate the properties of various sealants that were mixed with latex and carbon fiber, various test methods were adopted, such as bituminous bond strength test, softening point test, and cone penetration test. To evaluate moisture susceptibility, the BBS test was conducted under moist condition. The bond strength ratio (BSR) was calculated based on tensile strength ratio method. RESULTS : The sealant's properties significantly varied according to the amount of latex or carbon fiber. The usage of latex marginally enhanced the cone penetration test result, notwithstanding reduced asphalt content. This implies that the sealant will be proper cold temperature reason. Moreover, the addition of latex and carbon fiber evidently increased the softening point. This indicates that the tendency of the material to flow at elevated temperatures is encountered during service. With the addition of latex and carbon fiber, the moisture susceptibility measured with BSR improved marginally, while the bond strength under dry condition decreased marginally. Sealant F displays the highest bond strength and BSR under limited test conditions. CONCLUSIONS : According to the proportion of latex and carbon fiber mixed, properties of sealant, such as softening point, cone penetration, and BSR varied marginally. This indicates that the sealant has to be applied considering the environmental condition, to improve service life.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.1
• /
• pp.32-37
• /
• 2005

The procedure of soil sampling for on-farm quick test of soil nitrate is very important to improve practical application without weighing or drying soil. To improve application of test strip reflectometer as a quick on-farm analytical procedure for the estimation of soil nitrate concentration, three sampling methods such as gravimetric sampling (GS), particle density sampling (PDS) and bulk density sampling (BDS) for on-farm analytical procedure were investigated with twelve soils of 45 to $281mg\;kg^{-1}$ nitrate nitrogen concentration. The nitrate nitrogen concentrations measured from different soils were compared with two analytical methods, ion electrode method as a standard laboratory analysis (SLA) and test strip reflectometer at three moisture conditions, viz. air dried soil, 20 and 40% of maximum water holding capacity (MWHC). Nitrate nitrogen concentration measured by test strip reflectometer was significantly correlated with that of SLA, and the coefficients of variation (CV) were in the range of 3.5 to 10.9%. These CV values less than 10.9% were thought to be acceptable for the measurement of soil nitrate as an on-farm real time analytical procedure. The nitrate nitrogen concentration by BDS for test strip reflectometer as well as ion electrode method was more similar to that of SLA compared with those by GS and PDS especially in case of moist soils. This result suggests that the BDS is more useful than GS and PDS in case of on-farm analytical procedure of soil nitrate for moist soils. Further the practical measurement by BDS could be improved by substituting the bottle cap with a larger container.

• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.1-12
• /
• 1978

This study has intended to disclose the change of some chemical compositions of Ginkgo seeds which were acquired the treatment of cold-moist-stratification after collection. As check sample, the room-stored seeds were used. With the reasons that when the seeds not stratified were sown the delay of field germination has usually been resulted, the effectiveness of stratificaation in respect to alteration of chemical composition is to be investigated. The increase and decrease of growth promoting and inhibiting substances were investigated by means of chromatography method followed by rice seedling test or wheat coleoptile straight-growth test. The results obtained are summarized as follows; 1. In the untreated seeds, the zone of growth inhibitors on paper chromatograph were observed without regard to the tissue differences, embryo, endosperm and seedcoat. 2. Due to stratification, the amount of inhibitor has decreased in the embryo and seed coat, but growth promoters was decreased as compared with the check materials 3. The indications of results appear that each portion of the embryo, endosperm, and seedcoats of Ginkgo biloba L. contains the growth in hibitor taking part in germination dormancy. 4. It was presumed that hastening germination was influenced by decreasing of inhibitors in the embryo and seed coats rather than by increasing of promoters. 5. Gibberellin was detected at Rf 0.26 under the UV-lamp and the abscisic acid was detected at Rf 0.62, Rf 0.70, and Rf 0.78 and showed purple, gray, blue fluorescence respectively under the UV-lamp.