• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.841-848
• /
• 2015

As a vital part of renewable energy and electrical traction, power converters are supposed to have high reliability and good performance. However, power semiconductors produce considerable heat when the power converter works, which results in high junction temperatures that lower the reliability and performance of the power semiconductors. Many studies show that ambient humidity has a significant effect on power devices, but the influence of high humidity on junction temperatures has yet to be studied. Therefore, this paper presents a thermal model for power converters in moist air to obtain the junction temperature increase, which is utilized for the power converter used in a Switched Reluctance Motor System. Simulation results show that the law of converter temperature distribution is independent of the relative humidity in the case of fixed ambient temperature, whereas the temperature in the power converter decreases as the ambient relative humidity increases. These simulation results are validated with the experimental results.

• Advances in concrete construction
• /
• v.9 no.1
• /
• pp.33-41
• /
• 2020

In this study, polyethylene glycol (PEG) and polyacrylamide (PAM) have been used as self-curing agents to produce self-curing concrete (SC). Compressive strength, ultrasonic pulse velocity (UPV), bulk electrical resistivity, chloride ion penetrability, water permeability, and main microstructural characteristics were examined under different curing regimes, and compared to those of the control concrete mixture with no self-curing agents. One batch of a control mixture and one batch of a SC mixture were air-cured in the lab to act as non-water-cured samples. The water curing regimes for the control mixture included continuous water curing for 3, 7, and 28 days and periodical moist curing using wetted burlap for 3 and 7 days. Curing regimes for the SC mixtures included 3 days of water curing and periodical moist curing for 3 and 7 days. SC mixtures showed better microstructure development and durability performance than those of the air-cured control mixture. A short water curing period of 3 days significantly improved the performance of the SC mixtures similar to that of the control mixture that was water cured for 28 days. SC concrete represents a step towards sustainable construction due to its lower water demand needed for curing and hence can preserve the limited water resources in many parts of the world.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.1-17
• /
• 2007

This study is aimed at investigating optimum level of payments in the direct payment program for aquaculture extruded pellets both theoretically and practically by analyzing the effects on production and income in accordance with Green Box conditions of WTO Agreement on Agriculture. In particular, by analyzing both effects on production and income, it evaluates and compares payments affecting to the level of production and income, respectively. Analysis results indicate that the optimum level of payments in the direct payment program for aquaculture extruded pellets is determined by the growth rate of farmed fish, farming period, price and volume of extruded pellets, and additional amount of cost increase and decrease. Suppose that growth rates of farmed fish by extruded pellets(EP) and raw fish - based moist pellets(MP) are the same, it reveals the optimum level of payment should be lowered from the current level of payment. However, when the growth rate of farmed fish by EP is lower than that by MP, the optimum level of payment should be raised from the current level and total amount of payments by area should be increased as well.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.255-257
• /
• 2012

Epoxy resin without any hardener can harden in the presence of hydroxide ions in cement mortars and concretes at ambient temperature. The purpose of present study is to examine the hardening properties of hardener-free epoxy-modified mortars by curing conditions. The hardener-free epoxy-modified mortars using diglycidyl ether of A epoxy resin are prepared with various polymer-cement ratios, and subjected to initial moist/dry curing, initial steam(90℃) curing, initial steam/heat(80℃, 100℃) curing.As a result, degree of hardening of epoxy resin in initial moist/dry cured, initial steam cured and initial steam/heat(80℃) cured hardener-free epoxy-modified mortars is decreased with increasing polymer-cement ratio. However, it is markedly improved with additional dry-curing periods. On the other hand, regardless of the polymer-cement ratio and dry curing periods, degree of hardening of hardener-free epoxy-modified mortars with initial steam/heat(100℃) cure is over 95%.

• Korean Journal of Remote Sensing
• /
• v.27 no.6
• /
• pp.663-675
• /
• 2011

Sea Surface Temperatures (SSTs) using the equations of NOAA (National Oceanic and Atmospheric Administration) / NESDIS (National Environmental Satellite, Data, and Information Service) were validated over the seas around Korea with satellite-tracked drifter data. A total 1,070 of matchups between satellite data and drifter data were acquired for the period of 2009. The mean rms errors of Multi- Channel SSTs (MCSSTs) and Non-Linear SSTs (NLSSTs) were evaluated to, in most of the cases, less than $1^{\circ}C$. However, the errors revealed dependencies on atmospheric and oceanic conditions. For the most part, SSTs were underestimated in winter and spring, whereas overestimated in summer. In addition to the seasonal characteristics, the errors also presented the effect of atmospheric moist that satellite SSTs were estimated considerably low ($-1.8^{\circ}C$) under extremely dry condition ($T_{11{\mu}m}-T_{12{\mu}m}$ < $0.3^{\circ}C$), whereas the tendency was reversed under moist condition. Wind forcings induced that SSTs tended to be higher for daytime data than in-situ measurements but lower for nighttime data, particularly in the range of low wind speeds. These characteristics imply that the validation of satellite SSTs should be continuously conducted for diverse regional applications.

• Applied Biological Chemistry
• /
• v.30 no.4
• /
• pp.315-322
• /
• 1987

Attempts were made to unravel the differences in the textural properties between a dry type, Wonki and a moist type, Chunmi sweet potato. The changes in the ingredients, cellular shapes, degree of gelatinization and hardness of sweet potatoes during baking were studied. Alcohol insoluble solid, starch and protopectin contents and activities of amylase and polygalacturonase of Wonki sweet potato were higher than those of Chunmi sweet potato. The cell sizes were smaller and the number of starch granules within the cells were higher in Wonki than in Chunmi. Gelatinization occurred in Wonki more lately than in Chunmi during baking. The difference in hardness after baking between Wonki and Chunmi was found distinctively. But both samples were gelatinized completely, the difference in hardness was not found.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.6
• /
• pp.1315-1323
• /
• 2013

The purpose of this research is to evaluate the effects of a commercial mixed extruded pellet(EP) and raw fish moist pellet(MP) diet on diseases prevalence and serological constituents and HSI of korean rockfish, Sebastes schlegeli grown in two commercial-scale aquaculture farms from June to December in 2009. The growth of MP-fed rockfish was slightly faster than EP-fed rockfish during experimental period, but did not show significant differences. The levels of TCHO, TG, Glucose and TP in the MP-fed rockfish group were higher than those of EP-fed group, whereas there was no significant difference in other biochemical factors of blood between two groups. In addition, bacteria and virus were not detected in both MP- and EP-fed rockfish groups, and the infection rates of gill fluke between two groups did not show clear difference. In conclusion, there was no comparable difference in growth and the health extents of one year rockfish by administration of the commercial mixed extruded pellet(EP) and raw fish moist pellet(MP) diets.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.693-696
• /
• 2008

In order to assess time-dependent behaviors of the high-strength concrete that applied in actual FCM bridges with various curing environments, the shrinkages of air-dried, sealed, and moist 100${\times}$100${\times}$400 mm prism specimens were measured. And the compressive creep test of 3 and 28 days aged concrete in the tap water and 10% CaCl$_2$ solutions were carried out, then results were compared with traditional test results of air-dried and sealed specimens. Time-dependent behaviors of the concrete that according to curing circumstances between sealed and moist specimens show remarkable differences not only on the shrinkage but also on the creep. Hence there need some reconsiderations to the traditional creep test manners that predicting the creep and shrink age of actual concrete structures.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.582-589
• /
• 1988

A rapid expansion of moist air or steam in a supersonic nozzle gives rise to condensation, and the total pressure of the flow is decreased due to this irreversibility of condensation phenomenon. In the present paper, the loss in total pressure during the condensation process has been studied, by numerical analysis and pressure measurement, in the case of moist air expanding in a supersonic nozzle. The effects of the degree of supersaturation at the stagnation condition and expansion rate of the nozzle on the total pressure loss have been studied. The length of the region where the total pressure decreases during the condensation process is longer than that of the nonequilibrium condensation region, and of difference between the length of these two increases with the increase of the degree of supersaturation at the stagnation condition. Furthermore, the larger the expansion rate of the nozzle and the higher the temperature and the degree of supersaturation at the reservoir are, the larger the total pressure loss of the flow becomes. And, it is turned out that the total pressure loss be about 2 to 8 percent in the present study.

• Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.317-323
• /
• 2009

Waste products were biologically estimated from juvenile flounder (Paralichthys olivaceus) on three diet types-raw fish-based moist pellets, moist pellets, and extruded pellets. Total solid and soluble wastes were estimated by determining nutrient digestibility and accumulation in juvenile flounders through growth trials. Total solid wastes produced were 20%-23% of the organic matter supplied. Soluble excretions ranged from 45% to 49%. Soluble nitrogenous excretions ranged from 36.4% to 46.2%. These results indicate that about 30.2%-35.9% of supplied feed is retained in the fishes' bodies while the remainder of feed is excreted into culture systems or the surrounding environment.