• 제목/요약/키워드: Modulus reduction ratio

검색결과 73건 처리시간 0.026초

손상영역을 이용한 철근 콘크리트 보의 손상평가 (Damage Assessment of Reinforced Concrete Beams using Damage-area concept)

  • 노원균;심창수;김기봉;김현호;홍창국
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.647-650
    • /
    • 2004
  • This paper deals with the damage assessment of the concrete beam using Damage-area concept and the modulus of elasticity reduction of the beam was evaluated. Simply supported concrete beams were loaded at the mid-span. When the displacements from the tests were increased more than $10\%$ of the initial values, flexural cracks occured. Judging from the observed cracks, damaged area of the beams were assumed and the modulus of elasticity reduction using the smeared-cracking concept was estimated to minimize the error between the test results and analytical results. Main parameters for the assessment were height of the crack area, length of the crack area, position of the crack area and the modulus of elastic reduction ratio. In each stage, damaged elements and their stiffness reduction were estimated to minimized the error.

  • PDF

국내 준설매립토 지반의 동적변형특성 (Dynamic Deformation Characteristics of Korean Hydraulic-Fills Soil Deposits)

  • 김동수
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.69-76
    • /
    • 1999
  • Because of the limited land in Korea most of the projects require large-scale reclamation. The hydraulic-filled soil deposits are usually loose and susceptible to be liquified during earthquake. The dynamic deformation characteristics which expressed by shear modulus and damping ratio are important to analyze the earthquake ground motion. In this paper resonant column tests were performed on five hydraulic filled soil in Korea and the deformational characteristics at both small and medium strains were investigated. The coefficients in the Hardin equation to predict the representative maximum shear modulus and modulus reduction cure are also proposed.

  • PDF

비닐스트립-시멘트로 보강된 느슨한 중간 모래의 정규화 전단탄성계수 및 감쇠비 곡선 산정식 제안 (Proposal of Predictive Equations of Normalized Shear Modulus and Damping Ratio Curves for Loose Medium Sand Reinforced by Vinyl Strip-cement)

  • 김종민
    • 한국지반공학회논문집
    • /
    • 제37권12호
    • /
    • pp.33-45
    • /
    • 2021
  • 본 연구에서는 비닐스트립-시멘트로 보강된 느슨한 중간 모래의 정규화 전단탄성계수 및 감쇠비 산정식을 제안하였다. 상대밀도 40%의 모래시편을 다양한 비닐스트립 혼합비(0.0, 0.1, 0.3, 0.4%)와 시멘트 혼합비(0, 1, 2%)로 보강한 후 15, 30, 60kPa의 구속압조건에서 수행한 공진주시험 자료(Yu, et al., 2018)를 분석하여 정규화 전단탄성계수와 감쇠비 산정식을 보강조건과 구속압조건의 함수로 제안하였다. 제안된 산정식을 적용한 결과와 시험결과를 비교한 결과 결정계수 0.9 이상의 높은 신뢰도를 보여주었다. 본 연구에서 제안된 산정식을 이용하면 비닐스트립-시멘트로 보강된 느슨한 중간모래의 전단탄성계수와 감쇠비를 공진주시험 수행없이 간단히 산정할 수 있어 시간과 비용이 절감될 것으로 기대한다.

Dynamic shear modulus and damping ratio of saturated soft clay under the seismic loading

  • Zhen-Dong Cui;Long-Ji Zhang;Zhi-Xiang Zhan
    • Geomechanics and Engineering
    • /
    • 제32권4호
    • /
    • pp.411-426
    • /
    • 2023
  • Soft clay is widely distributed in the southeast coastal areas of China. Many large underground structures, such as subway stations and underground pipe corridors, are shallow buried in the soft clay foundation, so the dynamic characteristics of the soft clay must be considered to the seismic design of underground structures. In this paper, the dynamic characteristics of saturated soft clay in Shanghai under the bidirectional excitation for earthquake loading are studied by dynamic triaxial tests, comparing the backbone curve and hysteretic curve of the saturated soft clay under different confining pressures with those under different vibration frequencies. Considering the coupling effects of the confining pressure and the vibration frequency, a fitting model of the maximum dynamic shear modulus was proposed by the multiple linear regression method. The M-D model was used to fit the variations of the dynamic shear modulus ratio with the shear strain. Based on the Chen model and the Park model, the effects of the consolidation confining pressure and the vibration frequency on the damping ratio were studied. The results can provide a reference to the earthquake prevention and disaster reduction in soft clay area.

Seismic performance and optimal design of framed underground structures with lead-rubber bearings

  • Chen, Zhi-Yi;Zhao, Hu;Lou, Meng-Lin
    • Structural Engineering and Mechanics
    • /
    • 제58권2호
    • /
    • pp.259-276
    • /
    • 2016
  • Lead-rubber bearings (LRBs) have been used worldwide in seismic design of buildings and bridges owing to their stable mechanical properties and good isolation effect. We have investigated the effectiveness of LRBs in framed underground structures on controlling structural seismic responses. Nonlinear dynamic time history analyses were carried out on the well-documented Daikai Station, which collapsed during the 1995 Hyogoken-Nanbu earthquake. Influences of strength ratio (ratio of yield strength of LRBs to yield strength of central column) and shear modulus of rubber on structural seismic responses were studied. As a displacement-based passive energy dissipation device, LRBs reduce dynamic internal forces of framed underground structures and improve their seismic performance. An optimal range of strength ratios was proposed for the case presented. Within this range, LRBs can dissipate maximum input earthquake energy. The maximum shear and moment of the central column can achieve more than 50% reduction, whereas the maximum shear displacement of LRBs is acceptable.

응답변위법에 의한 터널의 내진해석 (Seismic Analysis of Tunnel Response by Response Displacement Method)

  • 윤세웅;신종호;박두희
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.457-462
    • /
    • 2009
  • In this study, seismic analysis is performed using simplified method, analytical solution and numerical analysis based on one-dimensional seismic site response analysis. The results show that analytical solution of tunnel response is predicted more conservative than numerical solution. And simplified method is not appropriate for seismic analysis of tunnel response. In addition, it is reasonable to determine shear-modulus reduction ratio performing seismic site response analysis to consider ground nonlinear-behavior.

  • PDF

RMR에 따른 변형률 의존 수리전도도 변화 해석 (Modification of Strain-dependent Hydraulic Conductivity with RMR)

  • 윤용균
    • 터널과지하공간
    • /
    • 제13권1호
    • /
    • pp.44-51
    • /
    • 2003
  • 응력 재분포에 의해 발생하는 수리전도도의 변화를 평가하기 위하여 변형률 의존 수리전도도 변화방정식을 사용하였다. 주요 입력 변수는 탄성계수 감소비와 응력 재분포에 의해 발생한 변형률이다. 무결암에서부터 완전히 파쇄된 암반조건을 나타내기 위하여 탄성계수 감소비 대신에 탄성계수 감소비와 RMR간의 상관관계를 이용하였다. 전단 변형에 따른 팽창이 수리전도도의 증가에 영향을 미치지만 그 영향 정도는RMR에 따라 달라졌으며, 인장변형률이 절리에 작용하는 경우 암반의 RMR이 감소함에 따라 수리전도도는 증가하는 것으로 나타났다. 암반에 작용하는 응력 상태에 따라 수리전도도의 변화도 다른 것으로 나타났는데, 수평응력 대 수직응력의 비가 다른 이방성 응력 상태가 수리전도도의 변화에 가장 큰 영향을 미치는 것으로 나타났다.

잔골재 조립율 및 굵은골재 입형이 콘크리트의 특성에 미치는 영향 (The Effect on the Properties of Concrete by Fine Aggregate Fineness Modulus and Grain Shape of Coarse Aggregate)

  • 정용욱;윤용호;이승한
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.102-105
    • /
    • 2003
  • The purpose of this study is to examine the influence of the flowability and the compressive strength of concrete after the improving of grain shape of the coarse aggregate and fine aggregate fineness modulus. According to the experimental results, the coarse aggregate after improvement of grain shape it lead to be down by 6% fine aggregate ratio, from 47% to 41%. The 0.5% increase of fine aggregate fineness modulus lead to 3% increase of concrete slump, and 1% reduction of concrete air content. While compressive strength on fine aggregate fineness modulus, it was increased until fineness modulus 3.0, but after it reached by 3.5 it was decreased. The compressive strength of the coarse aggregate after improving the grain shape was decreased by 6% due to loss of the adhesion of cement paste.

  • PDF

섬유혼합토의 비선형 동적물성치 (Nonlinear Dynamic Properties of Fiber Reinforced Soils)

  • 박철수;황선근;목영진
    • 한국지반공학회논문집
    • /
    • 제19권2호
    • /
    • pp.189-197
    • /
    • 2003
  • 본 논문은 공진주시험과 삼축압축시험을 이용하여 소변형률(0.0001%~l%) 범위에서 섬유혼합토의 변형 특성을 규명하였으며, 최대전단탄성계수를 잣대로 보강효과를 평가하였다. 또한 단섬유의 직경에 대한 길이의 비(형상비), 흙의 중량에 대한 섬유 중량의 섬유혼합비, 단섬유의 종류에 따른 보강효과를 비교 검토하였다. 시료는 주문진 표준사에 폴리프로필렌 재질의 단섬유를 무작위로 배합하여 사용하였다. 섬유혼합토의 최대전단탄성계수는 비혼합토에 비해 최대 30%까지 증가하였고, 비선형 영역에서의 전단탄성계수 감소량도 억제되었다. 형상비가 증가할수록 최대전단 탄성계수는 증가하고, 단사에 비해 망사의 보강 효과가 큰 것으로 나타났다. 섬유혼합비는 0.3 % 부근에서 보강효과가 가장 커, 최적인 것으로 확인되었다.

Flow behavior of high internal phase emulsions and preparation to microcellular foam

  • Lee, Seong Jae
    • Korea-Australia Rheology Journal
    • /
    • 제16권3호
    • /
    • pp.153-160
    • /
    • 2004
  • Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.