• 한국해양공학회지
• /
• 제24권4호
• /
• pp.53-58
• /
• 2010

Offshore floater such as FPSO, drillship is composed of topside and hull side, and the interface structure is called topside module support. In this study, practical considerations were investigated for the design of topside module supports, from the concept design stage to the final stage of structural determination, in view of design efficiency and construction productivity. The effects of welding design factors of topside module support, such as welding throat thickness, sectional welding area, and welding man-hours, were compared and analyzed closely with respect to productivity. The current status and problems regarding the application of deep or full penetration welding are discussed, and a direct-calculation method is suggested as a possible solution to these problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2006

This paper presents a hybrid SoC design for phase detection of single tone signal. The designed hybrid SoC is composed of three functional blocks, i.e., an analog to digital converter module, a phase detection module and a controller module. A design of the controller module is based on a 16-bit RISC architecture. An I/O interface and an LCD control interface for transmission and display of phase measurement values are included in the design of the controller module. A design of the phase detector is based on a recursive sliding-DFT. The recursive architecture effectively reduces the gate numbers required in the implementation of the module. The ADC module includes a single-bit second-order sigma-delta modulator and a digital decimation filter. The decimation filter is designed to give 98dB of SNR for the ADC. The effective resolution of the ADC is enhanced to 98dB of SNR by the incorporation of a pre FIR filter, a 2-stage cascaded integrator- comb(CIC) filter and a 30-tab FIR filter in the decimation. The hybrid SoC is verified in FPGA and implemented in 0.35 CMOS Technology.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.125-130
• /
• 2016

In this paper, various heat dissipation designs for a rail anchoring failure detection module were investigated by a thermal flow analysis. For the detection module with the heat dissipation design on the overall housing surface, an average temperature inside the module was lowered by $25^{\circ}C$ when compared to no heat dissipation design. In addition, an internal heat-flow blocking layer and an heat conduction layer inserted between the LED module and housing case were effective in reducing the temperature in the rail anchoring failure detection, which has a limited space for installation and little air flow. Especially, the temperature near LED module decreased below $55^{\circ}C$ when the optimal heat dissipation design was applied.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.969-971
• /
• 2000

In this paper, shortening of product life cycle and wide disposal of consumer product have given rise to many environmental problems, it needs to propose module design principle for saving of disassembly cost and reusing of used part and subassembly. To analyze characteristics of module for recycling, materials and function of part and subassembly must be classified. In disassembly process, a unit operation can be grasped for disassembly function, worker, tool and sorting process. As a result of applying module design principle, simpler structure and reduced structural interference can be realized for product structure. For disassembly, simpler disassembly and quicker disassembly can be obtained for recycling.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.88-94
• /
• 2006

In this study, the dynamic impact analysis for the passenger air-bag(PAB) module has been carried out by using FEM to predict the dynamic characteristics of vehicle ride safety against head impact. The impact performance of vehicle air-bag is directly related to the design parameters of passenger air-bag module assembly, such as the tie bar bracket's width and thickness, respectively, However, the product's design of PAB module parameters are estimated through experimental trial and error according to the designer's experience, generally. Therefore, the dynamic analysis of head impact test of the passenger air-bag module assembly of automobile is needed to construct the analytical methodology At first, the FE models, which are consist of instrument panel, PAB Module, and head part, are combined to the whole module system. Then, impact analysis is carried out by the explicit solution procedure with assembled FE model. And the dynamic characteristics of the head impact are observed to prove the effectiveness of the proposed method by comparing with the experimental results. The better optimized impact performance characteristics is proposed by changing the tie bracket's width md thickness of module. The proposed approach of impact analysis will provides an efficient vehicle to improve the design quality and reduce the design period and cost. The results reported herein will provide a better understanding of the vehicle dynamic characteristics against head impact.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.237-245
• /
• 2003

More and more many people show a keen interest in the ergonomics application car. One of the recent trends of cockpit development is to integrate fore part of whole cockpit and compartment. The goal of this study is to develop and Analysis of User's Convenience a cockpit prototype based on the design guide of cockpit integration module. The process of this study has been followed analyzing development trend of next generation Automotive cockpit, extracting the design factor needed to making integration module and laying down the design guide of cockpit integration module. Finally, this study is indicate an instance that evaluation of utilization with Integrated Automotive Cockpit Module System.

• 멤브레인
• /
• 제29권3호
• /
• pp.147-154
• /
• 2019

BSA 단백질 용액의 전량 막여과에서 상용(commercial) 막모듈의 경사각 변화에 따라 발생된 자연대류 불안정 흐름(NCIF)의 투과 플럭스 증가 효과를 측정한 결과, 막모듈의 경사각이 $0^{\circ}$에서 $180^{\circ}$로 증가하면 NCIF 발생이 커져 플럭스가 증가하였다. 그러나 상용 막모듈은 모듈 내에 존재하는 공기층을 완전히 제거해야 NCIF를 발생시킬 수 있다. 본 연구에서 설계 제작된 custom design 막모듈은 crossward 방향($90^{\circ}$)으로 막투과가 이루어져 모듈 상부에 공기층이 존재하더라도 항상 NCIF가 발생된다. Custom design 막모듈에서 BSA와 dextran 용액의 막여과 실험을 수행한 결과, NCIF의 발생으로 2시간 조작 시 BSA 용액의 경우 약 3.8배, dextran 용액의 경우 약 1.8배까지 투과 플럭스가 증가하였다. 또한 BSA 용액을 대상으로 한 20시간의 조작에서도 NCIF의 발생이 지속되어 플럭스가 약 7.5배까지 증가하였다. 본 연구에서 설계된 막모듈은 항상 NCIF가 발생되므로 막오염 형성 억제에 따른 투과 플럭스 증가를 기대할 수 있어 전량여과 막모듈로서의 활용성이 있음을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.185-189
• /
• 2005

This paper focuses on the design for Rx/Tx switch module of GSM(global standard mobile) band, characterization of a miniature, low power and dual-band implementation of the front-end switch module with low-pass filer And the effort to make agreement between the simulated design and the measured data for these solutions takes the place through accumulated design and manufacturing data library. We present the design, modeling and measurement of switch module integrating GSM Rx/Tx switching circuit and LPF(low pass filter) on a LTCC(low temperature co-fired ceramic) substrate. For GSM application, insertion and return loss of the low pass filter designed was less than 0.3 dB which was less than 12.7 dB at 900 MHz. The LTCC switch module contained 10 embedded passives and 3 surface mount components integrated on 4.6$\times$4.8$\times$1.2 mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module measured at 900 MHz was 11 dB. In both of the design approach yielded excellent agreement between measured and simulated results.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.43-52
• /
• 1996

This paper describes interactive computer procedures for design the forming sequences in cold forging. This system is implemented on the personal computer and its environment is a commercial AutoCAD system. The programming language. AutoLISP, was used for the configuration of the system. Since the process of metal forming can be considered as a transformation of geometry, treatment of the geometry of the part is a key in process planning. To recognize the part section geometry, the section entity representation, the section coordinate-redius representation and the section primitive geometru were adopted. This system includes six major modules such as input module, forging design module, forming sequence design module, die design module, FEM verification module and output module which are used independently or in all. The sequence drawing wigh all dimensions, which includes the dimensional tolerances and the proper sequence of operations, can generate under the environment of AutoCAD. The acceptable forming sequences can be verified further, using the FE simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.264-267
• /
• 2002

This paper proposed a effective priority selection algorithm named weighted round-robin algorithm and show the implementation result of DMAC priority selection module using prosed weighted round-robin algorithm. I parameterize timing constraints of each functional module, which decide the effectiveness of system. Proposed weighted round-robin algorithm decide the most effective module for data transmission using parameterize timing constraints and update timing parameter of each module for next transmission module selection. I implement DMAC priority selection module using this weighted round-robin algorithm and can improve the timing effective for data transmission from memory to functional module or one functional module to another functional module.