• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.213-219
• /
• 2017

Streaming server is that an image produced in real time or a file form of image produced ahead consists of SNS service, and the relay module of streaming server includes output management module that set an output channel more than 2 and control transmission of video content. This thesis intends to suggest how to stream through plural output channel that contains output channel of external streaming server using relay module and do streaming provided to terminal receiving image, and streaming server, streaming system for this. Thus, by extending output channel sending out image to output channel of external streaming server, the scale of streaming server is not limited and the process allotting external streaming server into output channel sending the image becomes simple, so management of output channel becomes efficient even when sending several images.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2414-2417
• /
• 2005

Compact Camera Module(CCM) is widely used in PDA, Celluar phone and PC web camera. With the greatly increasing use for mobile applications, there has been a considerable demands for high speed production of CCM. The major burden of production of CCM is assembly of lens module onto CCD or CMOS packaged circuit board. After module is assembled, the CCM is inspected. In this paper, we developed the image capture board for CCM and the imaging processing algorithm to inspect the defects in captured image of assembled CCMs. The performances of the developed inspection system and its algorithm are tested on samples of 10000 CCMs. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.786-791
• /
• 2009

Recently, digital camera module has been extensively utilized in mobile devices. The digital camera module should be smaller and lighter than digital still camera module to be used in mobile device. But, mobile camera can't get high quality image as good as the one of digital still camera due to the optical limitation of minimized module. Especially, AE system of mobile camera occurs excessive hunting and oscillation due to miniaturization of module. In this paper, improved AE algorithm which is applied fuzzy PI control is suggested to compensate this point.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.513-516
• /
• 2003

Current paper introduces the additional multimedia module for digital TV. The module is developed for displaying the image captured by digital still camera, camcorder, or PC in the digital TV. For these purpose, the module has the interface circuit for accessing five media type of memory cards. It decodes JPEG, BMP, or TIFF image data saved in the memory card and converts the image data to analog RGB signal. It also supports three types of output image size from HD to WXGA resolution. So the introduced module could be adopted In the most of digital TV.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to-multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module has a UART interface for HCI and a audio codec for voice. The interface between controller and this module supports common control interface. An FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.591-595
• /
• 2011

In this paper, we design the hardware architecture of the BICM(Bit Interleaved Coded Modulation) module for next generation European broadcast system and implement the BICM module with DSP(Digital Signal Processor) TMS320C6474. Simulation result shows that the BER(Bit Error Rate) performance of the fixed-point BICM module using more than 8 bits is very similar to that of the floating-point BICM module.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.407-410
• /
• 1997

In this paper, we have designed a portable patient monitor that monitors both ECG and NIBP(Non-Invasive Blood Pressure) for a patient who is bring moved around inside a hospital. System hardware consists of the one-chip microcomputer(80c251), A/D converter, ROM, RAM, LCD diplsy, two channel ECG module and NIBP module. NIBP module was calibrated to the values found in NIBP analyzer. ECG module detects QRS complex and compute heart rate. NIBP module measures the blood pressure by oscilometric method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.243-247
• /
• 1996

A general procedure for motion capture and mimic system has been delineated. Utilizing sensors operated in the magnetic fields, complicated and optimized movements are easily digitized to analyze and reproduce. The system consists of a motion capture module, a motion visualization module, a motion plan module, a motion mimic module, and a GUI module. Design concepts of the system are modular, open, and user friendly to ensure the overall system performance. This procedure is being implemented on a virtual cyber cube. and an inverted pendulum. With modifications, this procedure can applied for complicated motion controls.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.2
• /
• pp.1-10
• /
• 2002

This study is a study on the building integrated method of Photovoltaic. It was analyzed into a basic installation condition and an integrated form in this study. And it was confirmed through the 3D simulation & drawing work of an integrated situation to the real domestic building. The Photovoltaic installation of the country to an optimal efficiency for the year must be installed to the due south with an angle of thirty degrees. And also a module spacing must be more than doubled from the bottom to the top of module to prevent from efficiency falling by a shadow of photovoltaic module in a roof setting of flat roof. If Photovoltaic module is an adequate material that is a basic requirement as a building's finishing material, it's not only an efficiency of alternation with an existing finishing material but also a building's design element.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.68-69
• /
• 2009

Heat Assisted Magnetic Recording (HAMR) is one of the most promising candidates for high density magnetic storages over 1 Tb/$in^2$ areal density. Since the precise light delivery to the head is a key factor to realize HAMR application, it is required to establish the light delivery using micro laser module and micro actuator. For the careful control of micro actuator, a laser module was designed including laser diode, optical fiber, collimating lens, and fabricated V-groove substrate. In addition, the basic aligning method between the laser module and HAMR head was studied by the detection of current change in photo diode due to the amount of reflected light from the head.