• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.78-88
• /
• 2024

Ship-radiated noise received by passive sonar that can measure underwater noise can be identified and classified ship using Detection of Envelope Modulation on Noise (DEMON) analysis. However, in a low Signal-to-Noise Ratio (SNR) environment, it is difficult to analyze and identify the target frequency line containing ship information in the DEMONgram. In this paper, we conducted a study to extract target frequency lines using semantic segmentation among deep learning techniques for more accurate target identification in a low SNR environment. The semantic segmentation models U-Net, UNet++, and DeepLabv3+ were trained and evaluated using simulated DEMONgram data generated by changing SNR and fundamental frequency, and the DEMONgram prediction performance of DeepShip, a dataset of ship-radiated noise recordings on the strait of Georgia in Canada, was compared using the trained models. As a result of evaluating the trained model with the simulated DEMONgram, it was confirmed that U-Net had the highest performance and that it was possible to extract the target frequency line of the DEMONgram made by DeepShip to some extent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.635-642
• /
• 2000

We have been derived theoretically the SER's and CLP's of Wireless ATM (WATM) cells employing an OFDM/16QAM modulation scheme in wireless channel modeled as a frequency selective Rayleigh fading channel. The amount of the performance improvement of WATM- OFDM/16QAM systems adopting various coding techniques has been evaluated. In frequency selective Rayleigh fading channel, considering CLP : $10^{-3}$ as a criterion, it is observed that the performance improvement of about 14 dB is obtained in terms of $E_b/N_o$ by employing an OFDM scheme. It is also confirmed that convolutional coding technique gives better performance than the other coding techniques. Especially, when the convolutional codes are adopted to WATM-OFDM/16QAM systems, voice transmission services are sufficiently available with 5 dB of $E_b/N_o$.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.238-249
• /
• 2003

Eureka 147 DAB system based on the orthogonal frequency division multiplexing (OFDM) was adopted as the transmission scheme for terrestrial digital multimedia broadcasting (DMB) system in Korea. The OFDM has several advantages comparing to the single carrier modulation. However, its high Peak-to-average power ratio (PAPR) increases the complexity of the D/A and A/D converters and reduces the efficiency of the high power amplifier To reduce the high PAPR of OFDM, various techniques such as clipping, peak windowing, companding, selected mapping (SLM), Partial transmit sequences (PTS), etc. have been proposed. In this paper, we propose modified configurations of SLM and PTS for effective implementation and evaluate the performance on the PAPR reduction of DMB system. The simulation results show that the modified SLM (MSLM) has merits in reducing the amount of computation and hardware complexity due to the reduction of the number of vector $P^{(U)}$, while satisfying the same performance and maintaining the same required bits (RB) for side information. With the same amount of computation and the same RB, the modified PTS (MPTS) is also shown to be better than PTS in the performance of PAPR reduction.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.79-84
• /
• 2014

Increasing demand for realistic media and improvement of transmission and device techniques accelerate ultra-high definition(UHD) service realization. In Korea, the cable TV broadcasting companies are planning to commercialize in Apr. 2014. For the terrestrial TV broadcasting service, technical issues are considered for the specification of UHD broadcasting system. However, the frequency bands and the system bandwidth for the terrestrial UHD broadcasting system have not been decided. In this paper, we propose required spectrum bandwidth for the next-generation terrestrial broadcasting service considering source coding, error correcting codes and modulation techniques. Also, we propose frequency management plan for terrestrial UHD broadcasting system in which we divide all parts of the country into 9 frequency zones and allocate 4 frequency band to each frequency zone considering single frequency network (SFN).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2000

The error diffusion technique is frequently utilized for the digital Imaging output devices to convert continuous level Image into bi-level Image It Yields the binary image with the high frequency emphasis that gives a pleasing perception to human eyes But, due to the non-homogeneous distribution of dots, It exhibits undesirable patterns that degenerate the perceived quality Various techniques have been proposed to Improve the Image quality by the error diffusion techniques In this paper, the cause of non-homogeneity of dot distribution is analyzed first. A threshold modulation technique that employs a simple sinusoidal function is proposed in this paper The proposed method achieves the homogeneous dot distribution by forcing the minor pixels on the binary Image to maintain the principal distance defined according to their gray levels. It also minimizes the void and clusters of minor pixels.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.9-17
• /
• 2015

The development of wireless communication technology and change in the ICT market has led to the development of the M2M service and technology. Under these circumstances, the M2M environment has been the focus of communication environment construction between machines without control or direct intervention of human being. With characteristics of wireless communication environment, the possibility of being exposed to numerous security threats and safe communication security technology have becoming an issue an important requirements for problems such as data exposure, forgery, modulation, deletion, and privacy. This research analyzes requirements of trapdoor collision hash, generates keys between groups under the M2M environment by using the specificity of trapdoor, and suggests technology to exchange keys with session keys. Further, it also suggests techniques to confirm authentication of device and gateway in accordance with group key generation. The techniques herein suggested are confirmed as safe methods in that they have attack resistance such as Masquerade Attack, Man-in-the-Middle Attack, and Replay Attack in the group communication block by using the speciality of collision message and collision hash.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.397-406
• /
• 2014

Radio frequency (RF) jamming is a denial of service attack targeted at wireless networks. In resource-hungry scenarios with constant traffic demand, jamming can create connectivity problems and seriously affect communication. Therefore, the vulnerabilities of wireless networks must be studied. In this study, we investigate a particular type of RF jamming that exploits the semantics of physical (PHY) and medium access control (MAC) layer protocols. This can be extended to any wireless communication network whose protocol characteristics and operating frequencies are known to the attacker. We propose two efficient jamming techniques: A low-data-rate random jamming and a shot-noise based protocol-aware RF jamming. Both techniques use shot-noise pulses to disrupt ongoing transmission ensuring they are energy efficient, and they significantly reduce the detection probability of the jammer. Further, we derived the tight upper bound on the duration and the number of shot-noise pulses for Wi-Fi, GSM, and WiMax networks. The proposed model takes consider the channel access mechanism employed at the MAC layer, data transmission rate, PHY/MAC layer modulation and channel coding schemes. Moreover, we analyze the effect of different packet sizes on the proposed jamming methodologies. The proposed jamming attack models have been experimentally evaluated for 802.11b networks on an actual testbed environment by transmitting data packets of varying sizes. The achieved results clearly demonstrate a considerable increase in the overall jamming efficiency of the proposed protocol-aware jammer in terms of packet delivery ratio, energy expenditure and detection probabilities over contemporary jamming methods provided in the literature.

• Convergence Security Journal
• /
• v.18 no.2
• /
• pp.77-88
• /
• 2018

The purposes of this paper are to research the military utilization of weather modification techniques and to induce their research priority when considering the Korean Peninsular environment and technical level. To achieve these goals, the advantages and disadvantages of weather modification technologies have been discussed, and the evaluation index evaluation was derived through the Delphi method, and the weight of the evaluation index and the final research priority were induced through analytic hierarchical process. Analysis shows that the ionospheric modulation technology has the highest priority in terms of effectiveness as a weapon system and compatibility in the Korean Peninsula environment. It is expected that Korean ionosphere modification can disturb C4ISR function of the enemy and guarantee ours reliably when operating PGM, military satellite, surveillance & reconnaissance equipments, etc. Other weather modification technologies except for ionosphere modification should be developed gradually in that potential threat can be expanded to neighboring countries after the Unification of the Korea.

• International Journal of Computer Science & Network Security
• /
• v.24 no.2
• /
• pp.43-52
• /
• 2024

Medical imaginings assume a important part in the analysis of tumors and cerebrospinal fluid (CSF) leak. Magnetic resonance imaging (MRI) is an image segmentation technology, which shows an angular sectional perspective of the body which provides convenience to medical specialists to examine the patients. The images generated by MRI are detailed, which enable medical specialists to identify affected areas to help them diagnose disease. MRI imaging is usually a basic part of diagnostic and treatment. In this research, we propose new techniques using the 4D-MRI image segmentation process to detect the brain tumor in the skull. We identify the issues related to the quality of cerebrum disease images or CSF leakage (discover fluid inside the brain). The aim of this research is to construct a framework that can identify cancer-damaged areas to be isolated from non-tumor. We use 4D image light field segmentation, which is followed by MATLAB modeling techniques, and measure the size of brain-damaged cells deep inside CSF. Data is usually collected from the support vector machine (SVM) tool using MATLAB's included K-Nearest Neighbor (KNN) algorithm. We propose a 4D light field tool (LFT) modulation method that can be used for the light editing field application. Depending on the input of the user, an objective evaluation of each ray is evaluated using the KNN to maintain the 4D frequency (redundancy). These light fields' approaches can help increase the efficiency of device segmentation and light field composite pipeline editing, as they minimize boundary artefacts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.974-982
• /
• 2009

Photomixing techniques beating two optical signals with different wavelengths and strong correlations are also very useful techniques to make a continuous wave(CW) signals in the range of millimeter(mm) and terahertz(THz) frequencies. An optical double sideband-suppressed carrier(DSB-SC) technique is one of the popular techniques to generate two optical signals with different wavelengths and strong correlations. DSB-SC signals with strong correlations are generated by a CW modulation of an optical carrier with a local oscillator and an optical modulator. In the previous parers related the DSB-SC for producing the CW signals within the range of mm and THz frequencies, there have been no reports why the optical carrier should suppress. In order to clear that, we have analyzed and measured the characteristics of the mm-wave CW signals made by the DSB-SC photomixing in this paper. From our analysis and measurement results, compared with the case of the DSB with the maximized optical carrier, the power and phase noise have improved about 23.9 dB and 21 dBc/Hz(@ 1 MHz offset frequency) in the case of the DSB with the minimized optical carrier (that is to say, the DSB-SC). Consequently, it is evident reason that the optical carrier should sufficiently suppress to obtain the mm-wave CW signals with the high power and low noise. This paper has given very helpful data to make mm- and THz-wave CW signals using photomixing techniques with the DSB-SC because the reason why the optical carrier should be suppressed is reported in this paper based on the numerical and experimental results.