• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1601-1607
• /
• 2009

As a general rule, the orthogonal modulation scheme which is widely used for wireless communications is not appropriate for the high speed data transmission applications due to the low bandwidth efficiency. Therefore, to increase the bandwidth efficiency of the conventional orthogonal modulation, we propose the multi-code trans-(bi-)orthogonal modulation in this paper. It is the combined scheme of multi-code modulation and trans-orthogonal modulation. We can know that the bandwidth efficiency of the proposed scheme is better than that of the conventional orthogonal modulation. Additionally, the receiver complexity of the proposed scheme is lower than that of the conventional orthogonal modulation. The proposed scheme can be used for the physical layer of the high speed wireless digital data transmission applications such as multimedia communications system and high speed personal area networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.336-341
• /
• 2014

When using a higher-order modulation scheme, there are variations in bit-reliability depending on the bit position in a modulation symbol. Variations of bit-reliability in the codeword block lower the decoding performance. Also, the decoding performance increases as the sum of the bit-reliabilities in the codeword block increases. This paper presents a novel hybrid automatic repeat request scheme that increases the sum of the reliabilities of the transmitted bits by lowering the modulation order, and decreases the variations of bit-reliability in the codeword block by preferentially retransmitting bits with low reliability. The proposed scheme outperforms the constellation rearrangement scheme. Furthermore, the proposed scheme also provides a good solution in cases where the size of the retransmission block is smaller than the size of the initial transmission block.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.481-490
• /
• 2009

This paper describes a SVPWM overmodulation scheme of NPC type three-level inverter for traction drives which extends the modulation index from MI=0.907 to unity. SVPWM strategy is organized by two operation modes of under-modulation and over-modulation. The switching states under the under-modulation modes are determined by dividing them with two linear regions and one hybrid region the same as the conventional three-level inverter. On the other hand, under the over-modulation mode, they are generated by doing it with two over-modulation regions the same as the conventional over-modulation strategy of a two level inverter. Following the description of over-modulation scheme of a three-level inverter, the system description of a vector controlled induction motor for traction drives has been discussed. Finally, the validity of the proposed modulation algorithm has been verified through simulation and experimental results.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.45-52
• /
• 2020

This paper is focused on the modulation scheme detection of the IEEE 802.11 standard. In the IEEE 802.11ac standard, the information of the modulation scheme is indicated by the modulation coding scheme (MCS) included in the VHT-SIG-A of the preamble field. Transmitting end determines the MCS index suitable for the low signal to noise ratio (SNR) situation and transmits the data accordingly. Since data field decoding can take place only when the receiving end acquires the MCS index information of the frame. Therefore, accurate MCS detection must be guaranteed before data field decoding. However, since the MCS index information is the information obtained through preamble field decoding, the detection rate can be affected significantly in a low SNR situation. In this paper, we propose a relatively robust modulation classification method based on deep learning to solve the low detection rate problem with a conventional method caused by a low SNR.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.655-658
• /
• 2008

In this paper, we explain the combined scheme of multi-code modulation and trans-orthogonal modulation. The name of the explained scheme is the multi-code trans-orthogonal modulation. Additionally, we propose a multi-code trans-biorthogonal modulation scheme, which is a little more improved multi-code trans-orthogonal modulation. We show the performance of the proposed schemes and compare the performance of the proposed schemes with the orthogonal modulation by using the computer simulation. According to the computer simulations, we can know that the bandwidth efficiency of the proposed schemes is better than that of the conventional orthogonal modulation. The proposed schemes can be used in physical layer of digital wireless telecommunication system to provide high speed data rate.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.669-672
• /
• 2008

In this paper, we propose a constant-amplitude multi-rode trans-bi-orthogonal modulation scheme by introducing a simple constant-amplitude coding scheme with redundant bits and trans-code, which if a modified orthogonal modulation scheme. Generally speaking, the orthogonal modulation scheme is not appropriate for the high speed data transmission applications because of bad bandwidth efficiency. Therefore, we use the multi-rode trans-bi-orthogonal modulation with trans-code for high bandwidth efficiency. Moreover, redundant bits are used for constant-amplitude-coding. Finally, we compare the performance of the proposed scheme with the orthogonal modulation and constant-amplitude multi-code trans-orthogonal modulation by using the computer simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.3
• /
• pp.999-1021
• /
• 2023

Differential spatial modulation uses the antenna index to transmit information, which improves the spectral efficiency, and completely bypasses any channel side information in the recommended setting. A generalized distributed multiple turbo coded-cooperative differential spatial modulation based on distributed multiple turbo code is put forward and its performances in Rayleigh fading channels is analyzed. The generalized distributed multiple turbo coded-cooperative differential spatial modulation scheme is a coded-cooperation communication scheme, in which we proposed a new joint parallel iterative decoding method. Moreover, the code matched interleaver is considered to be the best choice for the generalized multiple turbo coded-cooperative differential spatial modulation schemes, which is the key factor of turbo code. Monte Carlo simulated results show that the proposed cooperative differential spatial modulation scheme is better than the corresponding non-cooperative scheme over Rayleigh fading channels in multiple input and output communication system under the same conditions. In addition, the simulation results show that the code matched interleaver scheme gets a better diversity gain as compared to the random interleaver.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.671-676
• /
• 2015

Cooperative networks eliminate shadow area using relay and enhance communication performance by creating virtual multi input multi output (MIMO) system. In this paper, we analyze the performance of cooperative networks which use coherent modulation scheme in source-relay nodes and differential modulation scheme in relay-destination nodes depending on the relay location. We consider the performance analysis of systems with and without the direct transmission between source and destination node where the direct transmission adopts differential modulation scheme. In addition, the performance of the system with fully differential modulation scheme is compared with the system using partially differential modulation scheme. The performance of system is based on the symbol error rate between source and destination node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2470-2480
• /
• 1996

The energy efficiency and bandwidth efficiency are two important criterion in designing a modulation scheme Especially the constant envelope property must be considered as in the non-linear channel tht exit, for example in the nonlinear amplifiers for satellite repeater. The Q$^{2}$AM(Quadrature Quadrature Amplitude Modulation) is a new modulation scheme which combines the Q$^{2}$PSK(Quadrature Quadrature Phase Shift Keying) scheme which increases the signal space dimension and the QAM scheme which increases the bandwidth efficiency using the multi-level signal. The Q$^{2}$AM scheme has by far superior spectrum efficiency compared with the existing modulation schemes. Applying this scheme in the non-linear communication system increses the bandwidth efficiency but cannot envelop property. In this paper, a new system architecture is suggested which satisfies the large spectrum efficiency and constant envelope property by implementing the linear block coding prior to the Q$^{2}$AM modulation. the system has improved in performance by gaining the constant envelope and the additional coding gain. We able to observe the performance improvement of the suggested system(at BER=10$^{-5}$ ) of 4.4 dB for the 16-QAM and 0.7 dB for the Q$^{2}$PSK under the exact spectrum efficiency.

• Journal of the Optical Society of Korea
• /
• v.5 no.3
• /
• pp.99-109
• /
• 2001

This paper presents a phase-only modulation scheme for a three-dimensional (3-D) image matching system to improve optical efficiency of the system. The 3-D image matching system is based on the two mask heterodyne scanning. A hologram of the 3-D reference object is first created and then the phase of the hologram is extracted. The phase of the hologram is represented as one mask with the other mask being a plane wave. The superposition of each beam modulated by the two masks generated a scanning beam pattern. This beam pattern scans the 3-D target object to be recognized. The output of the scanning system gives out the correlation of the phase-only hologram of the reference object and the complex hologram of the target object. Since a hologram contains 3-D information of an object as a form of fringe pattern, the correlation of holograms matches whole 3-D aspect of the objects. Computer simulations are performed with additive gaussian noise and without noise for the complex hologram modulation scheme and the phase-only hologram modulation scheme. The computer simulation results show that the phase-only hologram modulation scheme improves the optical efficiency. Thus the system with the phase-only hologram modulation scheme is more robust than the system with the complex hologram modulation scheme.