• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.124-132
• /
• 2000

Distributed processing approach for structural optimization is presented in this study. It is implemented on network of personal computers. The validity and efficiency of this approach are demonstrated and verified by test model of truss. Repeated structural analysis algorithm, which spend a lot of overall structural optimization processes, are based on substructuring scheme with domain-wise parallelism and converted to be adapted to hardware and software environments. The design information data are modularized and assigned to each computer in order to minize the communication cost. The communications between nodes are limited to static condensation and constraint-related data collection.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.350-356
• /
• 2011

In this paper, we proposed the automatic cutting mechanism of the perforation pipes in an automobile muffler. This cutting mechanism makes continuous work possible, because it performs the batch work via the sequential operation of loading, feeding, cutting, and discharging. The proposed cutting mechanism consists of the frame unit, escape unit, turning unit, feeding unit, vision system, clamping unit, spindle/cutting unit and cooling unit. And, these mechanisms have been modularized through mechanical, dynamical and structural optimized design using the SMO (SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The cutting process cycle is performed in the order of loading, vision processing, feeding, clamping, cutting and discharging. And the cycle time for cutting one piece was designed to be completed in four seconds.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.437-441
• /
• 2004

Recently, as the power capability of satellites increase, we need to develop a new SAR(Solar Array Regulator) with much higher power capacity whenever we design a power system of a new satelite. In this case, modular design method could be a good solution for this kind of problem. But when we use a modular method in the design of the parallelled converter, it is very important to share current equally between each module connected in paralled. In this paper, we study how to design the optimum current control-loop and voltage control-loop when we apply average current-mode control method to the parallel SAR. With the design results, we make a protype of the 3-module paralleling SAR and verify its performances.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.355-356
• /
• 2012

본 논문은 배터리 셀 전압의 균등화에 대한 새로운 회로를 제안한다. 제안한 회로는 확장된 다권선 변압기를 이용한 회로로 변압기 사이에 있는 권선을 연결하여 모듈 간의 밸런싱 동작이 이루어지게 하는 회로이다. 밸런싱 성능을 분석하기 위하여 Cantilever 변압기 모델을 사용하였는데 이 모델을 통하여 모듈 간의 밸런싱 편차를 도출하였다. 기존의 회로와는 대조적으로 이 제안된 회로는 모듈화 및 제어가 쉽고 무엇보다도 배터리 수에 제한이 없다는 점이 장점이다. 이것은 고전압을 요구하는 하이브리드 전기 자동차(HEV)와 같은 어플리케이션에서의 밸런싱된 많은 직렬 연결된 배터리 셀 전압에 중요한 이점들이 될 수 있다. 본 논문에서는 이 회로의 타당성을 검증하기 위하여 이론적으로 분석하고 6개의 배터리 셀들을 이용하여 시뮬레이션을 실시하였다.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.193-199
• /
• 2014

The series connected battery cells are mainly used in high voltage battery pack application. However parameter inequality of each battery cell makes battery voltage imbalance problem. In this paper, a new balancing circuit utilizing converter scheme for the series connected battery cells is proposed. Proposed circuit offers easy control and fast equalization time. Moreover the circuit can be used in a practical application because it has high modularity and can operate during the charging/discharging cycle. To show its superiorness and effectiveness, the principle of proposed circuit is explained with computer simulation and experiment is carried out using lithium-ion battery.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1661-1667
• /
• 2008

Recently, a rolling stock has been requiring more efficient manufacturing method than welding for the improved quality and the enhanced fabrication of car body structure. As an alternative, modularization of car body structure is being studied. Accordingly, rolling stock manufacturers need to make it possible to develop a variety of rolling stock vehicles made from modularized sub-blocks in order to meet various customer's demands. The bolt-assembled car body structure for modularization is known to have many advantages over the existing weld-assembled method and is free from the possible welding defects, such as welds between dissimilar metals, crack, deformation and loss of strength. Consequently, we can have the improved overall quality, the reduced man powers for assembly and the satisfied strength of car body structure. The review is about the bolt-assembled car body structure for modularization to assure global competitiveness and an enhanced technique in terms of assembly methodology of car body structure.

• 한국해양공학회지
• /
• 제35권5호
• /
• pp.360-368
• /
• 2021

The need for energy harvesting in marine environments is gradually increasing owing to the energy limitation of marine robots. To address this problem, a catamaran-type sail drone (CSD), which can harvest marine energies such as wind and solar, was proposed in a previous study. However, it was designed and manufactured without considering the stability, optimal hull-form, and maintenance. To resolve these problems, a CSD with two keels, a performance estimator, V-shape hulls, and modularized components is proposed and its mechanism is developed in this study. To verify the performance of the CSD, the performance estimation using smoothed-particle hydrodynamics (SPH) and the heading control using fuzzy logic controller (FLC) are performed. Simulation results show the attitude stability of the CSD and the experimental results show the straight path of the CSD according to wind conditions. Therefore, the CSD has potential applications as an energy harvesting system.

• 한국산업융합학회 논문집
• /
• 제22권2호
• /
• pp.235-241
• /
• 2019

The shoe manufacturing process is very low compared to other industries due to the labor-intensive process. As automation and smart factories are becoming more and more automated, changes in the shoe manufacturing process are also needed. In this paper, we want to standardize the fuse manufacturing process by modularizing it. First, we defined the terms of shoeupper and fuse process, the shoe upper fuse process by function and classified it as a modular process. The fuse process can be modularized with pattern supply module, pattern recognition module, pattern laminate module, pattern waiting module, adhesion module, heat pressing module, transmission module, etc.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.643-648
• /
• 2005

The planning process for roadway construction involves a large amount of information on design, construction methods, quantities, unit costs, production rates, and site conditions. Therefore, it is very important to acquire, manage, and process the necessary information efficiently to produce a rigorous construction plan. GIS (Geographic Information System) is a very effective tool for integrating and managing various types of information including spatial and non-spatial data required for roadway construction planning. This paper proposes a GIS-based system for improving roadway construction planning with its 'Interactive Space Scheduling' and 'Operation Level Planning' functions. The proposed system can assist construction planners in a unique way by integrating design and construction information and creating modularized design elements for space scheduling in real time. It is expected that the proposed system could improve the efficiency of roadway construction planning.

• 한국BIM학회 논문집
• /
• 제14권1호
• /
• pp.11-21
• /
• 2024

This study is about a case of web application development using representative commercial BIM platform-linked APIs from Autodesk and Bentley Systems. The development method was aimed at application development using Autodesk's Forge API and Bentley System's iTwin API. The specific development content was limited to the Model Viewer, Issues, and File Transfer API, and the administrator's site. The first research result is that parts with different internal configurations of commercial platforms were independently modularized and developed, and the common front-end was unified. The second research result is that a web front-end technology, was used to visualize 3D models using the viewer API, and the possibility of additional application expansion was discovered.