• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.93-96
• /
• 2003

Korea Multi-Purpose SATellite (KOMPSAT) uses software-controlled unregulated bus system In which the main bus is directly connected to a battery and the duty-ratio for PWM switch is generated by the on-board satellite software algorithm. In this paper, we propose a new power-stage circuit that can be available for modularization of a solar array regulator(SAR) which is used in the KOMPSAT. The operations at each mode and current sharing characteristics of the power-stage are analyzed and verified by simulation and experiments on a prototype converter.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.47-51
• /
• 2007

Special quality of automobile clutch master cylinder(CMC) and analyzed aluminum, plastic material comparison. Efficiency of plastic master cylinder can modularize higher, light weight anger of parts, several piece parts by single parts, prove NVH(Noise, Vibration, Harshness) than aluminum master cylinder as analysis result. Also, structure is easy simplicity, exchange, maintenance costs can be reduced and decrease environmental pollution because recycling is superior. According as content of glass fiber increases, mechanical properties of matter of material increase equally and glass fiber changed variously by condition on manufacturing process. Through comparison analysis with Plastic Body development connection site, did verification.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1622-1625
• /
• 2005

In modern Automobile Engineers, Modularize of parts is developing tendency that is more effective manufacture system and maintenance, and it also can be bring down the production cost. In this study will expect faults of mold and find the optimum of Casting Condition from the Simulation software (Z-CAST), tensile specimen is attempted for define the basic properties and process condition. In reasult, Diecasting of Seat Motor Housing is expected to be best fitted in Works.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.46-53
• /
• 2002

In order to overcome the conventional robot's physical limitation to frequent changes in operational requirements, it is quite appealing to modularize its system components and allow them to be combined into various configurations to best suit the needs to a particular application. Several researchers have presented the concept of modular robot. In this paper, the kinematics and dynamics of modular robot are studied, which concretes the concept of modular robot. This study includes the selection of individual module, the definition of their parameters and the development of module based manipulate. analysis software package (MBMAP).

• 대한음성학회지:말소리
• /
• 제48호
• /
• pp.93-105
• /
• 2003

Since telephone channel has bandlimited frequency characteristics, speech signal over the telephone channel shows degraded speech quality. In this paper, we propose an algorithm using neural network to reconstruct wideband speech from its narrowband version. Although single neural network is a good tool for direct mapping, it has difficulty in training for vast and complicated data. To alleviate this problem, we modularize the neural networks based on appropriate clustering of the acoustic space. We also introduce fuzzy computing to compensate for probable misclassification at the cluster boundaries. According to our simulation, the proposed algorithm showed improved performance over the single neural network and conventional codebook mapping method in both objective and subjective evaluations.

• 한국산업융합학회 논문집
• /
• 제10권4호
• /
• pp.235-240
• /
• 2007

Special quality of automobile CMC(clutch master cylinder) and analyzed aluminum, plastic material comparison. Efficiency of plastic master cylinder can modularize higher, light weight anger of parts, several piece parts by single parts, prove NVH(Noise, Vibration, Harshness) than aluminum master cylinder as analysis result. Also, structure is easy simplicity, exchange, maintenance costs can be reduced and decrease environmental pollution because recycling is superior.

• 한국기계가공학회지
• /
• 제6권1호
• /
• pp.57-61
• /
• 2007

Special quality of automobile clutch master cylinder(CMC) and analyzed aluminum, plastic material comparison. Efficiency of plastic master cylinder can modularize higher, light weight anger of parts, several piece parts by single parts, prove NVH(Noise, Vibration, Harshness) than aluminum master cylinder as analysis result. Also, structure is easy simplicity, exchange, maintenance costs can be reduced and decrease environmental pollution because recycling is superior. According as content of glass fiber increases, mechanical properties of matter of material increase equally and glass fiber changed variously by condition on manufacturing process. Through comparison analysis with Plastic body development connection site, did verification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.313-316
• /
• 2002

The need to protect a main information and control a personal access using Biometrics in the intelligent building system is extended with growing the information and communication technologies in recent years. The fingerprint recognition technology is one of the biometrics methods available that has been widely used in various applications. But the present architecture of fingerprint recognition system has many of the problems because of centralized control network architecture. But we can solve the problems with distributed control network architecture. In this paper, the fingerprint recognition system uses the merit of the LonWorks. it is able to easily modularize the system and make up for the weak points in the typical fingerprint recognition system.

• 한국가구학회지
• /
• 제27권3호
• /
• pp.165-174
• /
• 2016

To modularize the joints of Hanok, the bending strengths of butterfly joints between pre-cut and manual member were compared. Structural size joints were manufactured and the length, width and thickness of each tenon were produced with different sizes. The ultimate load of pre-cut members was 2 times higher than that of manual members. Degree of anchorage for the joints on pre-cut member was also superior to that of manual member. By the F-test results, a great influence between ultimate load and sizes of tenon was found. In result of multiple regression analysis, the length and thickness of tenon were showed proportion relationships with the ultimate load, but the width of tenon was showed inverse proportion with the ultimate load. The results of this study can be used to identify the relationships among the major influence factors. Futhermore, it might be used as basic data for modularization the joints of Hanok.

• 한국전자통신학회논문지
• /
• 제5권2호
• /
• pp.214-220
• /
• 2010

본 연구에서는 로봇 미들웨어 기술 중 국제표준으로 채택된 RTC를 이용하여 이동 로봇 시스템의 구성요소에 대한 컴포넌트를 개발하였다. 또한 미들웨어 네트워크를 기반으로 이동 로봇 구성요소를 서로 연결하여 하나의 시스템을 구현하였으며 실제 이동 로봇인 NRLAB 02를 이용하여 구현한 이동 로봇 시스템의 성능 시험을 수행하였다.