• Publications of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.67-78
• /
• 1995

An introduction to the first CCD camera system in Bohyunsan Optica1 Astronomy Observatory(CCD#l) is presented. The CCD camera adopts modular dewar design of IfA(Institute for Astronomy at Hawaii University) and SDSU(San Diego State University) general purpose CCD controller. The user interface is based on IfA design of easy-to-use QUI program running on the NeXT workstation. The characteristics of the CCD#l including Gain, Charge Transfer Efficiency, rms Read-Out Noise, Linearity and Dynamic range is tested and discussed. The CCD#l shows 6.4 electrons RON and gain of 3.49 electrons per ADU, and the optimization resulted in about 27 seconds readout time guaranteeing charge transfer efficiency of 0.99999 for both direction. Linearity test shows that non-linear coefficient is $6{\times}10^{-7}$ in the range of 0 to 30,000 ADU.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.872-875
• /
• 1995

The strategy of open architecture control system intends to integrate manufacturing components on a single platform, so that a particular component can be easily added and/or replaced. Therefore, the control scheme is neither hardware dependent nor software dependent. In this paper a modular and object oriented approach for the open architecture structure of control systems is invesigated. A standard reference model for genetic manufacturer system, which consists of three modules; hardware module, operating system module, and application software module, is first proposed. Then a standard reference model for open architecture robot control system is suggested.

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1499-1507
• /
• 2015

High voltage direct current transmission based on modular multilevel converter (MMC-HVDC) is one of the most promising power transmission technologies. In this study, the mathematical characteristics of MMC-HVDC are analyzed in a synchronous rotational reference frame. A hybrid current vector controller based on proportional integer plus resonant is used to uniformly control the DC and double-base frequency AC currents under unbalanced grid voltage conditions. A corresponding voltage dependent current order limiter is then designed to solve the overcurrent problems that may occur. Moreover, the circulating current sequence components are thoroughly examined and controlled using a developed circulating current suppressor. Simulation results verify the correctness and effectiveness of the proposed control schemes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.486-491
• /
• 2005

There come various types of robot with researches for mobile robot. This paper introduces the multi-joint snake robot having 16 degree of freedom and composing of eight-axis. The biological snake robot uses the forward movement friction and the proposed artificial snake robot uses the un-powered wheel instead of the body of snake. To determine the enable joint angle of each joint, the controller inputs are considered such as color and distance using PC Camera and ultra-sonic sensor module, respectively. The movement method of snake robot is sequential moving from head to tail through body. The target for movement direction is decided by a certain article be displayed in the PC Camera. In moving toward that target, if there is any obstacle then the snake robot can avoid by itself. In this paper, we show the method of snake robot for tracing the target with experiment.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.796-803
• /
• 1988

In this paper, the design method, design techniques and structure of a language for a SCARA type industrial robot, are presented. The proposed new language is modular and expandable using the C programming language and the 8086 assembly language. It is composed of monitor mode which controls the main flow of the programs, editing mode which generates, corrects and edits the programs, execution mode which executes the generated programs, I/O mode which interacts with the external devices, and teach mode. The developed language is implemented on the robot controller to verify its performance.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.315-318
• /
• 2005

This paper characterizes the performance for a remote path tracking control of the mobile robot in IP network viamiddleware. The middleware is used to alleviate the effect of the delay time on a mobile robot path tracking in Network-Based Control environment. The middleware also can be implemented in a modular structure. Thus, a controller upgrade or modification for other types of network protocols or different control objectives can be achieved easily. A case study on a mobile robot path-tracking with IP network delays is described. The effectiveness of the proposed approach is verified by experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.178.3-178
• /
• 2001

This paper is concerned with designing a neural network based navigator that is optimized in a user-defined sense for a mobile robot using ultrasonic sensors to travel to a goal position safely and efficiently without any prior map of the environment. The neural network has a dynamically reconfigurable structure that not only can optimize the weights but also the input sensory connectivity in order to meet any user-defined objective. Therefore, in this research, we can select an optimal subset of sensory inputs that results in the best performance related to both navigation and structural complexity. Further, this research uses the manually trained initial population and the modular neural network to alleviate ...

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.137.1-137
• /
• 2001

A new method for a guide robot using Real-Time Linux OS is introduced in this paper. A guide robot is to guide people in museums or buildings. So it has to be more reliable and stable in its control system. In addition, it has to satisfy Real-Time operation requirement because it needs to react to changing environment prompty. The task includes localization, map building, collision avoidance, path planning, and user interface software. The modular guide robot is designed with Real-Time Linux OS, which is composed of many open sources for scheduler, interrupt dispatcher, fifos, shared memory, timer services. We developed application software to satisfy the given task. The developed guide robot moves at 0.2ms and the interrupt latency is less than 100$\mu\textrm{s}$ It is thought that the developed system can be a stable and low cost open architecture robot controller for ...

• Journal of Mechanical Science and Technology
• /
• v.17 no.2
• /
• pp.230-238
• /
• 2003

In this paper, a three-fingered anthropomorphic robot hand, called SKK Robot Hand 1, is presented. By employing a two-DOF joint mechanism, called Double Active Universal Joint (abbreviated as DAUJ from now on) as its metacarpal joint, the hand makes it possible to mimic humanlike motions. We begin with addressing the motivation of the design and mention how the anthropomorphic feature of a human is realized in the design of SKK Hand I Also, the mechanism of the hand is explained in detail, and advantages in its modular design are discussed. The proposed hand is developed for use as a testbed for dextrous manipulation. It is expected to resolve the increasing demand for robotic applications in unstructured environments. We describe its hardware construction as well as the controller structure including the preliminary results of experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.467-472
• /
• 2008

In this paper, we design, implement and apply network physical layer to 100 BaseFx optical cable interface module based on industrial ethernet protocol which is physical layer of EtherCAT that has ensure its open standard ethernet compatibility which having been provided with real time of control in network of intelligent service robot, can be process numerous data to sensor and motor control system. Through BLDC motor control performance tests, we try to propose suitability as internal network of intelligent service robot and automation system.