• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.459-466
• /
• 2004

In this paper, an effective skeleton method is proposed in order to obtain an enhanced digital image of skeleton line. The binary image using the threshold values is applied in the preprocessing stage and then the modified parallel processing method is applied to obtain the improved image of skeleton line. The existing skeleton methods are Rutovitz, Steiabelli and other five skeleton methods. In the digital process of skeleton line, the major problem caused by these methods is elongated lines and noise branches of the processed image. In this study, however, such noises are deleted first by the modified parallel processing step of the proposed method. Then a pixel is compared to its eight neighbor pixels. if its neighbor pixels are in one of the eight conditions, the central pixel is deleted. As a result, the quality of the skeleton is better then those produced by the existing skeleton methods.

• Structural Engineering and Mechanics
• /
• v.38 no.6
• /
• pp.803-823
• /
• 2011

In this paper, the three dimensional Parallel Realistic Failure Process Analysis ($RFPA^{3D}$-Parallel) code based on micromechanical model is employed to investigate the bonding behavior in FRP sheet bonded to concrete in single shear test. In the model, the heterogeneity of brittle disordered material at a meso-scale was taken into consideration in order to realistically demonstrate the mechanical characteristics of FRP-to-concrete. Modified Mohr-coulomb strength criterion with tension cut-off, where a stressed element can damage in shear or in tension, was adopted and a stiffness degradation approach was used to simulate the initiation, propagation and growth of microcracks in the model. In addition, a Master-Slave parallel operation control technique was adopted to implement the parallel computation of a large numerical model. Parallel computational results of debonding of FRP-concrete visually reproduce the spatial and temporal debonding failure progression of microcracks in FRP sheet bonded to concrete, which agrees well with the existing testing results in laboratory. The numerical approach in this study provides a useful tool for enhancing our understanding of cracking and debonding failure process and mechanism of FRP-concrete and our ability to predict mechanical performance and reliability of these FRP sheet bonded to concrete structures.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.1-6
• /
• 2003

In this paper, we extend the derivation of the iterative soft-output Viterbi algorithm (SOVA) for partial response (PR) channels, and modify its decoding process such that it works consistently for arbitrary high code rates, e.g., rate 64/65. We show that the modified SOVA always outperforms the conventional SOVA that appears in the literature with a significant difference for high code rates. It also offers a significant cut down in the trace-back computations. We further examine its performance for parallel and serial concatenated codes on a precoded Class IC partial response (PR4) channel. Code rates of the form $\frac{k_0}{k_0+1}$($k_0$ = 4, 8, and 64) are considered. Our simulations indicate that the loss suffered by the modified SOVA, relative to the APP algorithm, is consistent for all code rates and is at most 1.2 dB for parallel concatenations and at most 1.6 dB for serial concatenations at $P_b$ = $10^{-5}$.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.224-229
• /
• 2003

In this paper, an effective skeleton method is proposed in order to obtain an enhanced digital image of skeleton line. The edge-detection method is applied in the preprocessing stage and after that, the modified Parallel method is applied to obtain the improved image of skeleton line. The existing parallel methods are Zhang, Lu and Wang, and Paul methods. Firstly, a parallel process method Is applied, and the proposed method is applied that the original is compared with the four neighbor pixels and four corner pixels of mask. In conclusion, the proposed method shows an improved connectivity and quality of skeleton line.

• Journal of Korean Society of Water and Wastewater
• /
• v.16 no.6
• /
• pp.670-678
• /
• 2002

Since Korean government imposed a stricter regulation on effluent T-N and T-P concentrations from wastewater treatment plant, a new process has to be developed to meet these rules and this process should remove T-N and T-P, economically, from weak wastewater that is typical for Korea's combined sewer system sewage. In this study, a computer simulator, BioWin from EnviroSim, Inc. was used. Three processes - A2/O, Modified Johannesburg, UCT- had been simulated under same operational conditions and a new process - Parallel BNR Process - had been developed based on these simulation results. The Parallel BNR process consists of two rows of reactors: One row has anaerobic and aerobic reactors in series, and the other row has RAS anoxic1 and RAS anoxic2 reactors in series. In order to ensure anaerobic state in anaerobic tank, a part of influent is fed to RAS anoxic1 tank in second row. This process had been simulated under same conditions of other three processes and the simulation results were compared. The results showed that three existing processes could not perform biological phosphorus removal when the average influent was fed at any operation temperatures. However, the Parallel BNR process was found that biological phosphorus removal could be performed when both design and average influent were fed at any operation temperatures. This process showed the T-N concentration in effluent had a maximum value of 15mg/L when design influent was fed at $13^{\circ}C$ and a minimum value of 14mg/L when average influent was fed at $20^{\circ}C$. Also, T-P concentrations had a maximum value of 1.3mg/L when average influent was fed at $20^{\circ}C$ and a minimum value of 1.1mg/L when design influent was fed at $13^{\circ}C$. Based on these results, we found that this process can remove nitrogen and phosphorus biologically under any operational conditions.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.276-286
• /
• 2008

The representative alignments for taking a stereo image by using a stereoscopic camera are the toed-in and the parallel alignment. In this paper, we tried to find important factors in the process that captures the stereo image by modifying parallel type 3D camera alignment to take the same object information as, for instance, when toed-in type was used. The modified parallel type 3D camera has merits in both types. As a result, three important factors are found by simulation to be inter-camera distance, field of view and convergence angle for both types. And the change of the convergence angle is known to be the most important factor at the stereo fusible area in processing. The effective ranges of these factors to simulate perfectly toed-in type by modified parallel type are strongly dependent on a user's circumstances such as mobile, official, theater and so on. Additionally, the error of the simulation is reduced when the focal length of the stereo camera is short and the convergence angle becomes smaller.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.3
• /
• pp.210-219
• /
• 2017

This paper proposes a modified min-max algorithm (MMMA) for nonbinary quasi-cyclic low-density parity-check (NB-QC-LDPC) codes and an efficient parallel block-layered decoder architecture corresponding to the algorithm on a graphics processing unit (GPU) platform. The algorithm removes multiplications over the Galois field (GF) in the merger step to reduce decoding latency without any performance loss. The decoding implementation on a GPU for NB-QC-LDPC codes achieves improvements in both flexibility and scalability. To perform the decoding on the GPU, data and memory structures suitable for parallel computing are designed. The implementation results for NB-QC-LDPC codes over GF(32) and GF(64) demonstrate that the parallel block-layered decoding on a GPU accelerates the decoding process to provide a faster decoding runtime, and obtains a higher coding gain under a low $10^{-10}$ bit error rate and low $10^{-7}$ frame error rate, compared to existing methods.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.650-664
• /
• 2000

NOW(Network of Workstations) is considered as a platform for running parallel programs by many people. One of the fundamental problems that must be addressed to achieve good performance for parallel programs on NOW is the determination of efficient job scheduling policies. Currently most research on NOW assumes that all the workstations in the NOW have the same processing power. In this paper we consider a NOW in which workstations may have different computing power. We introduce 10 classes of space sharing-based scheduling policies that can be applied to the NOW with heterogeneous computing power. We compare the performance of these scheduling policies by using the simulator which accepts synthetically generated sequential and parallel workloads and generates the response time and waiting time of parallel jobs as performance indices of various scheduling strategies. Through the experiments the case when a parallel program is partitioned heterogeneously in proportion to the computing power of workstations is shown to have better performance than when a parallel program is partitioned into parallel processes of the same size. When the owner returns to the workstation which is executing a parallel process, the policy which just lowers the priority of the parallel process shows better performance than the one which migrates the parallel process to a new idle workstation. Among the policies which use heterogeneous partitioning and process priority lowering, the adaptive policy performed best across the wide range of inter-arrival time of parallel programs but when the load imbalance among parallel processes becomes very high, the modified adaptive policy performed better.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.188-193
• /
• 2008

Epoxy/Organically Modified Layered Silicate Nanocomposites were prepared by dispersing synthetic layered silicate modified with alkyl ammonium ions. In the dispersing process, the organically modified layered silicate were mixed in epoxy resin with shearing, and aggregation of the silicate were removed by centrifugal separation after mixing epoxy resin and silicates. Micrographs taken by transmission electron microscopy(TEM) indicate that the nanocomposites have a mixed morphology including both parallel silicate layers and exfoliated silicate layers area, As the thermal properties, the glass transition temperature of the nanocomposites was shifted to a higher temperature($+6^{\circ}C$)than pure epoxy. Furthermore, dispersion of OMLS will prevented relative permittivity from increasing at a high temperature above the glass transition temperature.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.17-20
• /
• 2003

The EMC's rheological effects on molding process are evaluated in this study. When considering mold processing for IC packages, the major concerning items in current studies are incomplete fill, severe wire sweeping and paddle shifts etc. To simulate EMC's fast curing rheokinetics with 3D mold flow behavior, one should select appropriate rheometry which characterize each EMC's rheological motion and finding empirical parameters for numerical analysis current studies present the new rheometry with parallel plate rheometry for reactive rheokinetic experiments, the experiment and numerical analysis is done with the commercial higher filler loaded EMC for the case of Thin Quad Plant Packages (TQFP) with package thickness below 1.0 mm. The experimental results and simulation results based on new rheometry matches well in point of the prediction of wire sweep, filling behavior of melt front advancement and void trapping position.