• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.88-95
• /
• 1996

Recently, the use of color data is growing fast in the area of image processing. To represent full resolution image on a limited output device, image has to be quantized an dithered. So, many dithering techniques are foundd in the printing. In this paper, we propose nonlinear quantization to consider the overlapping phenomena of neighboring printing dots and modified dot diffusion algorithm to compensate the color degradation produced in the quantization process. In the modified dot-diffusion quantization errors to be diffused are adjusted to improve both image blur and color change produced in the dot diffusion. The printed image obtained by the proposed color dithering method has higher visual quality an less color degradation than the images by conventional printing method.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.159-162
• /
• 2008

This paper presents a modified mean curvature diffusion filter to smooth speckle noise in images. Mean curvature diffusion filter has already shown good results in reducing noise in images while preserving fine details. In the mean curvature diffusion, the rate of smoothing is controlled by the local value of the diffusion coefficient chosen to be a function of the local image gradient magnitude. In this paper, the diffusion coefficient is modified to be controlled adaptively by local image surface slope and heterogeneity. The local surface slope contributes to preserving details (e.g.edges) in image and the local surface heterogeneity helps the smoothing filter consider the amount of noise in both edge and non-edge area. The proposed filter's performance is demonstrated by quantitative experiments using speckle noised aerial image and TerraSAR-X satellite image.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2328-2333
• /
• 2020

The filter technique was applied to noise images, as noise is the significant factor that cause poor image quality due to lower photon counting. The purpose of this study is to confirm that image quality can be improved using the median modified Wiener filter (MMWF) technique; this is achieved via a National Electrical Manufacturers Association International Electrotechnical Commission body phantom with four large spheres that are filled with the ^99mTc radioisotope when evaluating the image quality. Conventional filters such as Wiener, Gaussian, and median filters were designed, and signal to noise ratio, coefficient of variation, and contrast to noise ratio were used as the evaluation parameters. The improvement in the image quality was in the following order, from the least to the highest improvement, in all cases: Wiener filter, Gaussian filter, median filter, and the MMWF technique. The results show that the image quality was improved from 20.6 to 65.5%, 7.4-40.3%, and 12.7-44.7% for the SNR, COV, and CNR values, respectively, when using the MMWF technique, compared with the use of conventional filters. In conclusion, our results demonstrated that the MMWF technique is useful for reducing the noise distribution in gamma camera images.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.682-685
• /
• 2002

In this paper, we defined necessary operations and functional blocks of a multiplexer for 3-D video systems and present our multiplexer design. We adopted the ITU-T's recommendation(H.222.0) to define the operations and functions of the multiplexer and explained the data structures and details of the design for multiview image processing. The data structure of TS(Transport Stream) and PES (Packetized Elementary Stream) in ITU-T Recommendation H.222.0 does not fit our multiview image processing system, because this recommendation is fur wide scope of transmission of non-telephone signals. Therefore, we modified these TS and PES stream structures. The TS is modified to DSS(3D System Stream) and PES is modified to SPDU(DSS Program Data Unit). We constructed the multiplexer through these modified DSS and SPDU. The number of multiview image channels is nine, and the image class employed is MPEG-2 SD(Standard Definition) level which requires a bandwidth of 2∼6 Mbps. The required clock speed should be faster than 54(= 6 ${\times}$ 9)㎒ which is the outer interface clock speed. The inside part of the multiplexer requires a clock speed of only 1/8 of 54㎒, since the inside part of the multiplexer operates by the unit of byte. we used ALTERA Quartus II and the FPGA verification for the simulation.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.940-946
• /
• 2002

This paper proposes an image retrieval method to use the modified color correlogram. For retrieving images with less effect of the size variation of the regions in an image, the modified color correlogram is extracted by normalizing auto-correlogram and cross-correlogram of the color correlogram from a color image, and the similarity of two images is calculated by putting the less weight to the auto-correlogram of the modified color correlogram. Because proposed method uses the information of the color correlogram more effectively, we can get better results than that of color correlogram method. In the experiments, the performance of the proposed method is better as compared with that of the color cerrelogram method.

• Communications for Statistical Applications and Methods
• /
• v.16 no.2
• /
• pp.277-286
• /
• 2009

Image registration is a process to establish the spatial correspondence between images of the same scene, which are acquired at different view points, at different times, or by different sensors. In this paper, we introduce a robust brain registration technique for correcting the difference between two temporal images by the different coordinate systems in MR and CT image obtained from the same patient. Two images are registered where this measure is minimized using a modified conditional entropy(MCE: Modified Conditional Entropy) computed from the joint histograms for the intensities of two given images, we conduct the rendering for visualization of 3D volume image.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.472-472
• /
• 2010

The tomography has played a key role in tokamak plasma diagnostics for image reconstruction. The Phillips-Tikhonov (P-T) regularization method was attempted in this work to reconstruct cross-sectional phantom images of the plasma by minimizing the gradient between adjacent pixel data. Recent studies about the comparison of the several tomographic reconstruction methods showed that the P-T method produced more accurate results. We have studied existing Laplacian matrix used in Phillips-Tikhonov regularization method and developed modified Laplacian matrix (Modified L). The comparison of the reconstruction result by the modified L and existing L showed that modified L produced more accurate result. The difference was significantly pronounced when a portion of plasma was reconstructed. These results can be utilized in the Edge Plasma diagnostics; especially in divertor diagnostics on tokamak a large impact is expected. In addition, accurate reconstruction results from received data in only one direction were confirmed through phantom test by using P-T method with modified L. These results can be applied to the tangentially viewing pin-hole camera diagnostics on tokamak.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1337-1339
• /
• 2003

In this article, a new remote sensing image fusion model based on modified Kohonen networks is given. And a new fusion rule based on modified voting rule was established. Select Shaoxing City as the study site, located at Zhejiang Province, P.R.China. The fusion experiment between Landsat TM data (30m) and IRS-C Pan data (5.8m) was performed using the given fusion method. The fusion results show that the new method can gain better result in apply ing to the lower hill area, and the whole classification accuracy was 10% higher than the basic Kohonen method. The confusion between the woodlands and the waterbodies was also diminished.

• International Journal of Concrete Structures and Materials
• /
• v.19 no.1E
• /
• pp.41-48
• /
• 2007

Addition of latex to concrete is known to increase its durability and permeability. The purpose of this study is to analyze air void systems in latex-modified concretes using a reasonable and objective method of image analysis with such experimental variables as water-cement (w/c) ratios, latex contents (0%, 15%) and cement types (ordinary portland cement (OPC), high-early strength (HES) cement and very-early strength (VES) cement). The results are analyzed by spacing factor, air volume (content) after hardening, air void distribution and structure. Additionally, air void systems and permeability of latex-modified concrete (LMC) are compared by a correlation analysis. The results are as follows. The LMC of the same w/c ratio showed better air entraining (AE) effect than OPC with AE water reducer. The VES-LMC showed that the quantity of entrained air below $100{\mu}m$ increased more than four times. For the case of HES-LMC, microscopic entrained air between the range of 50 to $500{\mu}m$ increased greater than 7 times even in the absence of anti-foamer. Although spacing factor was measured rather low, the permeability of latex-modified concrete was good. It is construed that air void system does not have a considerable effect on the property of latex-modified concrete, but latex film (membrane) has a definite influence on the durability of LMC.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.10
• /
• pp.774-781
• /
• 2003

The important factors that cause position error in X-Y robot are inertial force, frictions and spring distortion in screw or coupling. We have to estimate these factors precisely to correct position errors, Which is very difficult. In this paper, we makes systems to inspect metal stencil which is used to print solder paste on pads of SMD of PCB with low precision X-Y robot and vision system. To correct position error that is caused by low precision X-Y robot, we defines position error vector that is formed with position of objects that exist in reference and camera image. We apply MHT(Modified Hough Transformation) for the aim of determining the dominant position error vector. We modify reference image using extracted dominant position error vector and obtain reference image that is the same with camera image. Effectiveness and performance of this method are verified by simulation and experiment.