• Bulletin of the Korean Chemical Society
• /
• 제16권3호
• /
• pp.293-296
• /
• 1995

• 한국환경과학회지
• /
• 제7권5호
• /
• pp.669-677
• /
• 1998

A porous $\alpha$-alumina tube of 2.5 mm O.D. and 1.9 mm I.D. was used as the support of an inorganic membrane. Macropores of the tube, about 150 nm in size, were plugged with silica formed by thermal decomposition of tetraethylorthosilicate at $600^{\circ}C$. The forced cross-flow CVD method that reactant was evacuated through the porous wall of the support was very effective in plugging macropores. The H$_2$ permeance of the prepared membrane was of the order of $10^{-8}/ molㆍs^{-1}/ㆍm^{-2}/. Pa{-1}$/, while the $N_2$ permeance was below $10^{-11}/ molㆍs^{-1}/ㆍm^{-2}/ㆍPa^{-1}$/ at $600^{\circ}C$. This was comparable to that of silica-modified Vycor glass whose size was 4 nm.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.102-107
• /
• 2017

The dependence of the IR optical properties of PMMA/$Al_2O_3$ nanocomposite on the alumina content was investigated in the wavelength range of $3500-2800cm^{-1}$. The samples were prepared via emulsion polymerization technique using oleic acid as a coupling agent. Grafting density calculations were carried out by means of elemental analysis CHN to yield the best coupling agent content. FTIR analysis confirmed the existence of a chemical bond between aluminum oxide and oleic acid. The outcomes of XRD analyses showed the presence of cubic gamma aluminum oxide in the nanocomposite, in contrast to the amorphous nature of PMMA. TEM images showed the core-shell morphology of the particles other than pristine PMMA. Optical constants of the nanocomposite were calculated based on FTIR spectra and the Kramers-Kronig equations. The presence of nano alumina modified some of the optical indexes in IR region.

• 분석과학
• /
• 제35권3호
• /
• pp.129-135
• /
• 2022

본 연구는 alumina, leucine, alumina와 leucine을 9:1로 혼합한 분말(이하 Al-Leu (9:1)), alumina와 leucine을 5:1로 혼합한 분말(이하 Al-Leu (5:1)), alumina와 sodium lactate를 5:1로 혼합한 분말(이하 Al-Lac (5:1))을 자연상태 시료지문을 남긴 후 1, 7, 14, 30일로 노화시킨 잠재지문에 전처리한 후 cyanoacrylate fuming(이하 CA 훈증법)으로 현출 증강을 시도하였다. 전체적으로 미처리한 후 CA 훈증한 잠재지문보다 alumina, leucine, Al-Leu (9:1), Al-Leu (5:1), Al-Lac (5:1) 분말로 전처리한 잠재지문의 면적값과 특징점 개수가 향상되었다. 따라서 5종류의 개시제가 CA 훈증 시 현출 증강을 향상시키는 것을 확인하였다.

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.756-766
• /
• 1999

This study was performed to evaluate effect on color and opacity of 3 different copy-milled In-Ceram cores by glass infiltration and porcelain veneering. Color was evaluated by the $CIEL^*a^*b^*$ readings were recorded with a Colorimeter, Color difference value(${\Delta}E^*_{ab}$) was calculated and opacity was represented by the contrast ratio. The variance of each color parameter ($L^*,\;a^*,\;b^*$), color difference value, and opacity change after glass-infiltrated and after veneered with porcelain was compared. Three experimental groups were fabricated as follows. Group 1 (Alumina core) 15 Alumina blanks was infiltrated with originally marketed glass (A1) and veneered with porcelain(A1) Group 2 (modified Alumina core) : 15 Alumina blanks was infiltrated with its associated glass(S11) and veneered with porcelain(A1) Group 3 (Spinell core) : 15 Spinell blanks was infiltrated with originally developed glass(S11) and veneered with porcelain(A1). The results were as follows: 1. After glass infiltration, $L^*$ value showed decrease, $a^*$ value showed decrease only group 1(p<0.001) and $b^*$ value showed increase on group 1, increase on group 2, 3(p<0.001). 2. After porcelain veneering, $L^*$ value showed decrease(p<0.001), $a^*$ value showed increase on group 1, decrease on group 2(p<0.05) and $b^*$ value showed decrease on group 1, increase on group 2, 3 (p<0.001). 3. ${\Delta}E^*_{ab}$ between before and after glass infiltration was more than 13.77, and between after glass infiltration and after porcelain veneering more than 19.63. 4. After glass infiltration and porcelain veneering, Alumina showed the lowest $L^*,\;a^*$ value and highest $b^*$ value among 3 different groups (p<0.05). ${\Delta}E^*_{ab}$ between group 1-2, 1-3 was higher than that of group 2-3. 5. After glass infiltration, opacity showed decrease, Group 1 had the highest opacity(p<0.05), but no significant differences between group 2 and 3. Above results suggest that glass infiltration and porcelain veneering effects on color and opacity of In-Ceram core, and that modified In-Ceram Alumina uses single crowns or bridges like In-Ceram Spinell.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.789-792
• /
• 2006

• Archives of Pharmacal Research
• /
• 제15권1호
• /
• pp.5-8
• /
• 1992

5-Alkyl-3-(1-thioxolanyl-cyclohexenyl)-resorcinol derivatives are readily prepared by boron trifluoride-on-alumina-catalyzed formation of 5-alkylresorcinols with 1-thioxolanyl-2-cyclohexenol; their formation depends on the nature of the alkylgroup. The yield is the highest with 5-(1, 1-dimethylheptyl)-resorcinol. The one with 5-pentylresorcinol is higher than 5-methylresorcinol and resorcinol apparently because of steric effects. The yields of the products increases: 3a (10%), 3b (20%) 3c (48%) and 3d (77%).

• Corrosion Science and Technology
• /
• 제6권3호
• /
• pp.133-139
• /
• 2007

Nickel powder was coated with aluminum nitrate solution to increase the thermal stability of a porous nickel support and control the nickel content in the Pd-Cu-Ni ternary alloyed membrane. Raw nickel powder and alumina coated nickel powder were uniaxialy pressed by home made press with metal cylindrical mold. Though the used nickel powder prepared by pulsed wire evaporation (PWE) method has a good thermal stability, the porous nickel support was too much sintered and the pores of porous nickel support was plugged at high temperature (over $800^{\circ}C$) making it not suitable for the porous support of a palladium based composite membrane. In order to overcome this problem, the nickel powder was coated by alumina and alumina modified porous nickel support resists up to $1000^{\circ}C$ without pore destruction. Furthermore, the compositions of Pd-Cu-Ni ternary alloy membrane prepared by magnetron sputtering and Cu-reflow could be controlled by not only Cu-reflow temperature but also alumina coating amount. SEM analysis and mercury porosimeter analysis evidenced that the alumina coated on the surface of nickel powder interrupted nickel sintering.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.233-239
• /
• 2006

Two different nanofluids were prepared by dispersing $Al_{2}O_3$ nanoparticles in transformer oil after hydrophobic surface modification. The agglomerated alumina nanoparticles with diameters from ${\mu}m$ to mm were ball-milled and then treated with surfactants such as lauric acid, stearic acid and oleic acid. The surface characteristics of modified nanoparticles were examined by FTIR spectroscopy. It showed that the hydrophobicity of nanoparticles was caused by esterification between hydroxyl groups on the particle surface and functional groups of surfactant. The shape and size distribution of ball-milled particles were analyzed by TEM and PSA. The results compared with the primary particles indicated that the size distributions of nanoparticles were dependant on milling times. The dispersion stability of modified nanoparticles dispersed in oil was highly dependent on the composition and amounts of surfactants.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2000년도 추계 총회 및 국제학술발표회
• /
• pp.112-114
• /
• 2000