• Wind and Structures
• /
• 제12권1호
• /
• pp.21-47
• /
• 2009

The logarithmic form for turbulent flow analysis guarantees the positivity of the turbulence variables as ${\kappa}$ and ${\varepsilon}$ of the ${\kappa}-{\varepsilon}$ model by using the natural logarithm of these variables. In the present study, the logarithmic form is incorporated into the finite element solution procedure for the unsteady turbulent flow analysis. A backward facing step flow using the standard ${\kappa}-{\varepsilon}$ model and a flow around a 2D square cylinder using the modified ${\kappa}-{\varepsilon}$ model (the Kato-Launder model) are simulated. These results show that the logarithmic form effectively keeps adequate balance of turbulence variables and makes the analysis stable during transient or unsteady processes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1129-1140
• /
• 2008

Many turbulence models have been developed in order to analyze the flow characteristics in an engine cylinder. Watkins introduced k-${\varepsilon}$ turbulence model for in-cylinder flow, and Reynolds modified turbulence dissipation rate by applying rapid transformation theory, Wu suggested k-${\varepsilon}-{\tau}$ turbulence model in which length scale and time scale are separated to introduce turbulence time scale, and Orszag proposed k-${\varepsilon}$ RNG model. This study applied the models to in-cylinder flow induced by intake valve and piston moving. All models showed similar flow fields during early stage of intake stroke. At the end of compression stroke, ${\kappa}-{\varepsilon}$ Watkins, ${\kappa}-{\varepsilon}$ Reynolds and ${\kappa}-{\varepsilon}$ RNG predicted well second and third vortex, especially ${\kappa}-{\varepsilon}$ RNG produced new forth vortex near central axis at the lower part of cylinder which was not predicted by the other models.

• 한국추진공학회지
• /
• 제2권3호
• /
• pp.20-35
• /
• 1998

벽면을 통한 유체의 유동이 있는 난류운동장의 특성을 분석하였다. 벽면을 통한 유체의 유동은 유출과 유입의 경우를 포함하여 Re$_{w}$ 의 절대크기가 0~160으로 다양하며 입구에서의 $Re_{in}$도 3${\times}$$10^3$에서 8${\times}$$10^4$까지 넓은 범위를 대상으로 하였다. 벽면을 통한 유체의 유동은 벽면 경계층의 변화를 초래하고 이에 따라 난류 유동장의 급격한 변화를 일으켜 벽면을 포함한 전 유동장의 특성을 변화시킨다. 이러한 복잡한 유동장을 올바로 예측하기 위하여 난류운동에너지 소산율 방정식의 자 항에 대한 모델을 개선한 수정 $\kappa$-$\varepsilon$ 모델을 도입하였으며 기존의 난류모델과의 비교를 통하여 성능 검증을 시도하였다. 해석을 통한 분석결과로부터 수정 $\kappa$-$\varepsilon$ 모델은 벽면을 통한 유체유동이 있는 복잡한 유동장을 올바로 예측할 수 있음을 알 수 있었다. 따라서 수정 $\kappa$-$\varepsilon$ 모델을 이용하여 다양한 경우의 벽면 및 입구 조건을 갖는 난류유동장을 해석할 수 있을 것으로 판단된다.단된다.

• 한국연소학회지
• /
• 제7권2호
• /
• pp.49-61
• /
• 2002

Numerical simulation is performed for stagnating turbulent flows of impinging and countercurrent jets by the Reynolds stress model(RSM). Results are compared with those of the ${\kappa}-{\varepsilon}$ model and available data to assess the flow characteristics and turbulence modes. Three variants of the RSM tested are those of Gibson and Launder(GL), Craft and Launder(GL-CL) and Speziale, Sarkar and Gatski(SSG). As well known, the ${\kappa}-{\varepsilon}$ model overestimates turbulent kinetic energy near the wall significantly. Although the RSM is superior to the ${\kappa}-{\varepsilon}$ model, it shows considerable difference according to how the redistributive pressure-strain term is modeled. Results of the RSM for countercurrent jets are improved with the modified coefficients for the dissipation rate, $C_{{\varepsilon}1}\;and\;C_{{\varepsilon}2}$ suggested by Champion and Libby. The performance of the three variants of the RSM model for stagnating flows are assessed.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.304-320
• /
• 1996

A multiple production .epsilon. equation model was developed in the low Reynolds number $\kappa$-$\varepsilon$ model with the aids of DNS data. We derived the model theoretically and avoided the use of empirical correlations as much as possible in order for the model to have generality in the prediction of complex turbulent flow. Unavoidable model constants were, however, optimized with the aids of DNS data. All the production and dissipation models in the $\varepsilon$ equation were modified with damping functions to satisfy the wall limiting behavior. A new $f_{\mu}$ function, turbulent diffusion and pressure diffusion model for the k and .epsilon. equations were also proposed to satisfy the wall limiting behavior. By, computational investigation on the plane channel flows, we found that the multiple production model for .epsilon. equation could improve the near wall turbulence behavior compared with the standard production model without the complicated empirical modification. Satisfication of the wall limiting conditions for each turbulence model term was found to be most important for the accurate prediction of near wall turbulence behaviors.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.216-225
• /
• 1999

Four turbulent $k-{varepsilon}$models(i.e standard model modified models with streamline curvature modification and/or preferential dissipation modification) are applied in order to analyze the tur-bulent flow of wall-attaching offset jet. The upwind numerical scheme was adopted in the present analyses. The streamline curvature modification results in slightly better prediction while the preferential dissipation modification does not. The obtained analytic results will be used as refer-ences for further study regarding Reynolds stress model. In addition this paper introduced a method of increasing nozzle outlet velocity gradually for numercal convergence. Even though the method was simple it was efficient in view of convergent speed CPU running time computer memory storage programming etc.

• 한국추진공학회지
• /
• 제6권1호
• /
• pp.1-11
• /
• 2002

Thermal stripping을 수반한 난류유동장에 대한 해석방법론 정립에 필요한 신뢰성 있는 난류모델을 선정하기 위하여 온도변화가 있는 비정상 난류유동장에 $\kappa$-$\varepsilon$ 모델, 수정 $\kappa$-$\varepsilon$ 모델, 그리고 full Reynolds stress(FRS) 모델을 적용하였다. 검증대상으로는 thermal stripping 현상이 자주 관찰되는 원자로 혹은 추진기구부 등에서 보이는 수직평판과 수평평판에 대한 제트유동이 있는 유동장을 선정하였으며 이 때의 유체로는 물 혹은 액체나트륨을 사용하였다. 분석결과 비정상 난류유동장은 FRS를 사용하여 3-D로 해석할 때 가장 나은 결과를 얻을 수 있었다. 그러나 경계면 부근을 비롯한 유동장내에서의 열전달 특성 분석의 정확성을 제고하기 위해서는 이를 위한 수정모델의 도입이 요구된다. 아울러 제트유동의 운동량이 thermal stripping 현상에 미치는 영향을 평가하기 위하여 제트유동의 유속을 변화시켜 이에 따른 영향을 점검한 결과 운동량의 증가는 유동장의 혼합능력을 증가시키고 온도변화 진폭을 상승시키는 것으로 나타났다.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.1052-1060
• /
• 1989

본 연구에서는 0-방정식 난류모형과 2-방정식 난류모형 그리고 역압력 구배와 수렴과 발산의 영향을 고려한 2-방정식 난류모형을 사용하여 대칭단면에서의 난류유동 을 해석하고, 계산 결과를 비교하여 난류모형의 적절성을 평가하고자 한다.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.325-336
• /
• 1994

A numerical simulation of velocity and temperature fields and Nusselt number distributions is performed by using the algebraic stress model (ASM) for the velocity profiles and low Reynolds number ${\kappa}-{\varepsilon}$ model and the algebraic heat flux model(AHFM) for turbulent heat transfer in a $180^{\circ}$ bend with a constant wall heat flux. In the low Reynolds number ${\kappa}-{\varepsilon}$ model, turbulent Prandtl number is modified by considering the streamline curvature effect and the non-equilibrium effect between turbulent kinetic energy production and dissipation rate. Every heat flux term presented in the transport equation of turbulent heat flux is reduced to algebraic expressions in a way similar to algebraic stress model. Also. in the wall region, low Reynods number algebraic heat flux model(AHFM) is applied.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.13-14
• /
• 2003

Two different ${\kappa}-{\varepsilon}-\overline{{\nu}{\nu}}-f$ turbulence models together with the two-layer model are evaluated for natural convection in a rectangular cavity. The numerical problem and accuracy of the turbulence models are discussed. The original $\overline{{\nu}{\nu}}-f$ model suffers from the numerical stiffness problem when used with the segregate solution procedure like the SIMPLE algorithm, and a remedy for this problem is proposed. It is shown that original $\overline{{\nu}{\nu}}-f$ model best predicts the mean velocity, Reynolds stresses and the turbulent heat flux while the modified $\overline{{\nu}{\nu}}-f$ model (N=6) overpredicts the turbulent quantities.