• Membrane Journal
• /
• v.34 no.2
• /
• pp.140-145
• /
• 2024

In modern times, when a change in the energy paradigm is required, hydrogen is an attractive energy source. Among these hydrogen purification technologies, technology using a membrane is attracted attention as a technology that can purify high purity hydrogen at low cost. However, palladium(Pd), which is mostly used because of its excellent hydrogen separation performance, is very expensive, so a replacement material is needed. In this study, a alloy membrane was manufactured from an alloy of niobium (Nb), which has high hydrogen permeability but is weak to hydrogen embrittlement, and nickel (Ni) and zirconium (Zr), which have low hydrogen permeability but are highly durable. Hydrogen permeation characteristics were confirmed under conditions of 350~450 ℃ at 1 to 4 bar. The maximum hydrogen permeation flux was 0.69 ml/cm²/min for the Ni₄₈Nb₃₂Zr₂₀ alloy membrane without Pd coating, and 13.05 ml/cm²/min for the Pd coated alloy membrane.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.206-210
• /
• 2024

Industrial facilities that use modern IT technologies require the ensured reliability and security of information in automated enterprise management. Concurrently, so as to ensure a high quality of communication, it is necessary to expand the bandwidth of communication channels, which are limited by the physical parameters of the radio frequency spectrum. In order to overcome this contradiction, we propose the application of technology fundamental to ultra-wideband signals, in which the ratio between the bandwidth and its central part is greater than "one". For this reason, the information signal is emitted without a carrier frequency - simultaneously within the entire frequency band - provided that the signal level is lower than the noise level. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Mathematical models of signals and values observed in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals are furthermore recommended. These assist in identifying features of the dependence of the error probability on the normalized signal-to-noise ratio and the signal base. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals. During the first half of the bit interval, the switch closes the output of the transmitter directly to the generator of the ultra-wideband signal - forming a reference signal. In the middle of the bit interval, the switch alternates the output to one of two possible positions depending on the encoding signal - "zero" or "one", forming the information part of the ultra-wideband signal. It should also be noted that systems with autocorrelation reception and separate transmission of reference and information signals, provide a high level of structural signal secrecy. Furthermore, they provide the reliable transmission of digital information, especially in interference conditions.

• Convergence Security Journal
• /
• v.24 no.2
• /
• pp.189-200
• /
• 2024

In recent years, the development of defense technology has become digital with the introduction of advanced assets such as drones equipped with artificial intelligence. These assets are integrated with modern information technologies such as industrial IoT, artificial intelligence, and cloud computing to promote innovation in the defense domain. However, the convergence of the technology is increasing the possibility of transfer of cyber threats, which is emerging as a problem of increasing the vulnerability of defense assets. While the current cybersecurity methodologies focus on the vulnerability of a single asset, interworking of various military assets is necessary to perform the mission. Therefore, this paper recognizes these problems and presents a mission-based asset management and evaluation methodology. It aims to strengthen cyber security in the defense sector by identifying assets that are important for mission execution and analyzing vulnerabilities in terms of cyber security. In this paper, we propose a method of classifying mission dependencies through linkage analysis between functions and assets to perform a mission, and identifying and classifying assets that affect the mission. In addition, a case study of identifying key assets was conducted through an attack scenario.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.23-28
• /
• 2024

This study focuses on investigating and exploring solutions to problems related to the increase in the elderly population in modern society where aging is rapidly progressing. With the advent of an aging society the elderly population requires more attention and support. In response companies are attempting to provide elder care services using AI and robotic technology. These services can assist seniors not only with health management and daily life care but also with emotional health aspects. This paper analyzes various elder-related technologies available in the current market investigates their pros and cons and potential for development. The paper concludes that companies need to develop and provide more AI and robot-based elder care services to solve aging problems. Such services can alleviate social and emotional issues in an aging society enhancing the quality of life for seniors.

• Animal Bioscience
• /
• v.37 no.4_spc
• /
• pp.775-785
• /
• 2024

Pork production is a significant agricultural enterprise in the United States and Canada. The United States is the third-largest global producer of pork and Canada ranks seventh in pork production. The North American Free Trade Agreement and its successor, the U.S.-Mexico-Canada Agreement, have facilitated trade and integration between the two countries. The majority of production systems are modern and intensive, characterized by large vertically integrated farms using advanced technologies. Both nations benefit from their status as major producers of feed grains, with the United States leading in corn and soybeans, while Canada excels in canola and barley production. The regulatory frameworks for food safety, animal welfare, and environmental stewardship differ slightly, with the FDA and USDA overseeing these aspects in the United States, and Health Canada and the Canada Food Inspection Agency in Canada. The United States and Canada also have well-established distribution networks for pork products, relying on both domestic and international markets. Export markets play a crucial role, with the United States being a major importer of Canadian pigs, and both countries exploring opportunities in Asia. Despite a rise in global demand, domestic pork consumption trends differ, with per capita consumption remaining stable in the USA and declining in Canada. Changing consumer preferences, including a demand for ethically raised and locally sourced pork, may influence production practices. Future trends in pig production include a focus on consumer concerns, sustainability, disease prevention, reduction of antimicrobial use, and advancements in technology. The industry is adapting to challenges such as disease outbreaks and changing regulations, with a strong emphasis on animal welfare. Labor and workforce considerations, along with advancements in technology and automation, are expected to shape the efficiency of pork production in the future.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.495-499
• /
• 2024

This article summarizes the importance, definition, key strategies and future directions of sustainable packaging design.In modern society, sustainable packaging design is not only concerned with environmental protection and resource conservation, but also involves economic, social and cultural sustainable development.This paper explores strategies to reduce environmental burden and promote ecological balance by using environmentally friendly materials, optimizing packaging design, improving packaging recyclability and reuse. In addition, the article emphasizes the importance of design innovation, such as adopting a simplified design concept and modular system, as well as increasing the versatility of packaging.It also explores the application of life cycle assessment in packaging design to ensure that every step from design to disposal minimizes environmental impact. Finally, despite the environmental and social benefits that sustainable packaging design brings, it still faces technical, economic and regulatory challenges in practice.Future design will require interdisciplinary collaboration, integration of advanced technologies, consumer education and engagement, and enhanced policy and standard-setting to promote widespread adoption and practice of sustainable packaging.

• Microbiology and Biotechnology Letters
• /
• v.52 no.1
• /
• pp.44-54
• /
• 2024

One of the serious modern environmental problems is pollution caused by highly toxic pesticides. Only small amounts of applied pesticides reach their target, and the rest ends up in soil and water. Chlorpyrifos is a toxic, broad-spectrum organophosphate insecticide. In humans, chlorpyrifos inhibits acetylcholinesterase (AChE) in the peripheral and central nervous system, and particularly in children, small amounts of this pesticide cause neurotoxic damage. As the toxic effects of chlorpyrifos and its persistence in the environment require its removal from contaminated sites, it is essential to study the biological diversity of chlorpyrifos-degrading microorganisms. In this study, we sought to determine the chlorpyrifos-degrading ability of the bacterial strain Ochrobactrum intermedium PDB-3. This strain was isolated from soil contaminated with various pesticides and identified as PDB-3 based on morpho-cultural characteristics, MALDI-TOF MS, and 16S rRNA. Studies were conducted for 30 days in sterile soils containing initial concentrations of 50, 75, 100, and 125 mg/kg of chlorpyrifos. To determine the degradation of chlorpyrifos, a liquid culture of the strain was added to the soil at three optical densities: 0, and after 24 and 48 h (OD = 0.03, 0.2 and 0.32). Using GX-MS, we determined that chlorpyrifos was converted to 3,5,6-trichloro-2-pyridinol (TCP). We also found that with increasing optical density, rapid degradation of the initial concentration of chlorpyrifos occurred. Sterile soil without strain PDB-3 was used as a control sample.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.278-287
• /
• 2013

Modern information technologies continue to provide industries with new and improved methods. With the rapid development of Machine to Machine (M2M) communication, a smart container supply chain management is formed based on high performance sensors, computer vision, Global Positioning System (GPS) satellites, and Globle System for Mobile (GSM) communication. Existing supply chain management has limitation to real time container tracking. This paper focuses on the studies and implementation of real time container chain management with the development of the container identification system and automatic alert system for interrupts and for normal periodical alerts. The concept and methods of smart container modeling are introduced together with the structure explained prior to the implementation of smart container tracking alert system. Firstly, the paper introduces the container code identification and recognition algorithm implemented in visual studio 2010 with Opencv (computer vision library) and Tesseract (OCR engine) for real time operation. Secondly it discusses the current automatic alert system provided for real time container tracking and the limitations of those systems. Finally the paper summarizes the challenges and the possibilities for the future work for real time container tracking solutions with the ubiquitous mobile and satellite network together with the high performance sensors and computer vision. All of those components combine to provide an excellent delivery of supply chain management with outstanding operation and security.

• Archives of design research
• /
• v.16 no.3
• /
• pp.309-318
• /
• 2003

A work of Art is not supposed to be isolated from the world, but it should be influenced by its cultural background and situations of the times. Therefore, Art itself reflects its era. In other words, it is created being based on the thought of its artist and simultaneously interacting with external conditions or circumstances of the era, so it would also affect the cultural code of its society. This is why modern art made by the individual living in this complicated and diversified society is quite avant-garde. Various demands from its society and diversified senses have been influencing diversification of works of Art. Now we can say that a mode of art is also dose to current stream of the times. A lot of artists have been trying to get out of traditional way of presentation techniques and classification of genres. In that point, the emergence of Multimedia Alt is inevitable in this digital era. The terms of Internet or multimedia are now familiar with everybody in the world, and a lot of works like Technology Art, Information Art, Computer Art, Digital Art, New Media Art, and so on have been coming into the world by using multimedia. Unlike other works of Art, these works from multimedia are practically used by being combined with technologies. Hereupon, in this paper I would like to find out a concept of Multimedia Art, its social function, and the future prospect of this brand-new form of art.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.25-34
• /
• 2019

Modern disasters prevent accidents in advance and recover after accidents are very important. Our government's current response to these accidents is not appropriate. As for disaster management so far, it has been the center of disaster response and recovery efforts, and has been led by the government against it. The reality is that most private organizations and agencies have only subsidized government disaster management agencies. Korea is no longer a safe zone for earthquakes. Now for the establishment of effective disaster management system for earthquakes in the diagnosis is very urgent and the problems of the operational disaster management, which the problems of the nation.Policies to improve academic efforts to seek alternative proposal is also at a time when volume can be said to be very big need to mine. This study from 2016 to 2019, about the earthquake that took place between National Statistical Office, based on analysis of data to. First of all, research 1: What was the government's plan on Pohang earthquake? The results showed that the residents' evacuation of Pohang was important in the Pohang earthquake, but for the sake of students' safety, they were directly assigned to the test site to cope with the emergency situation. Therefore, the research and analysis shows that the nation should continue to think about the causes and responses of the damage at the disaster site and strive to develop technologies and methods to minimize the damage.