• 제목/요약/키워드: Modem.

검색결과 1,809건 처리시간 0.019초

텔레매틱스 통신 환경에서의 CCK Rake 모뎀설계 및 성능분석 (Design and Performance Evaluation of CCK Rake Modem in Telematics Communication Environments)

  • 강법주
    • 한국정보통신학회논문지
    • /
    • 제10권2호
    • /
    • pp.360-367
    • /
    • 2006
  • 본 논문에서는 IEEE802.11b와 IEEE802.11g에서 제안한 CCK 변조방식의 변조기와 복조기를 구성하고, 차량간 통신환경과 같이 지연확산이 큰 경우에 대한 CCK Rake 수신기 구조를 제안하고 있다. 다경로 Rayleigh 페이딩 채널에서 각 경로의 채널추정은 패킷 프리앰블을 이용하여 추정하였고 코히런트 방식의 CCK Rake 수신기에서 다경로 신호들의 결합은 심벌레벨 결합 형태로 구성하였다. 본 논문의 성능분석 결과는 텔레매틱스 통신의 차량간 통신환경에서 CCK 모뎀의 성능을 평가하기 위하여 차량속도가 300km/h인 다경로 페이딩 채널에서 CCK 모뎀의 성능결과를 제시하고 있다.

무선 IP 네트워크에서 전용선 모뎀 사용가능성 검증 (The Investigation of the Leased Line Modem Usability in the Wireless Internet Protocol Network)

  • 박민호;백해현;금동원;최형석;이종성
    • 한국군사과학기술학회지
    • /
    • 제18권4호
    • /
    • pp.423-431
    • /
    • 2015
  • A leased line modem usability was evaluated and investigated in the wireless internet protocol(IP) network. The signal of the modem in the circuit switching network was translated to IP packet by using several voice codecs (PCM, G.711A, $G.711{\mu}$, and etc.) and transmitted through the wireless IP network. The wireless IP network was simulated by the Tactical information and communication network Modeling and simulation Software(TMS). The performance and usability of the leased line modem are simulated using the system-in-the-loop(SITL) function of TMS with respect to packet delay, jitter, packet discard ratio, codecs, and wireless link BER.

디지틀 마이크로파 무선 STM-1 신호전송을 위한 64 QAM RF MODEM (155Mbps)의 변조기 설계 (Modulator Design in the 64 QAM RF MODEM(155Mbps) for Microwave Digital Radio STM-1)

  • 방효창;장태화;장은영;이대영;조성준;김원후
    • 한국통신학회논문지
    • /
    • 제19권4호
    • /
    • pp.624-632
    • /
    • 1994
  • 본 연구에서는 DMR(Digital Microwave Radio) STM-1 신호전송을 위한 CCITT G.707SDH(Synchronous Digital Hierachy) 제1레벨인 155Mbps 속도의 64QAM RF MODEM 변조기를 구현하였다. 변조기의 성능을 좌우하는 중요한 특성은 PSF(Pulse Shaping Filter)를 설계하는 일로써, 기존에는 Chebychev 필터(roll-off factor a=0.33, 군지연 10nsec이하를 얻었다. 또한 PSF 통과후 -20dBm, IF 증폭단 통과후 0dBm의 출력레벨을 얻었다.

  • PDF

현대 펑크 패션의 특성에 관한 연구 (Study on the Characteristics of Modern Punk Fashion)

  • 손향미;박길순
    • 한국의류학회지
    • /
    • 제29권11호
    • /
    • pp.1444-1453
    • /
    • 2005
  • In this study, I tried to analyze the characteristics of modem punk fashion by applying characteristics of modem cultural phenomena. The method of this study is the qualitative study: I analyzed collections from 1996 to 2003 by suggesting an analysis frame based on bibliological studies and applying internet photo materials to the analysis frame. As a result, modem punk fashion has the following characteristics. First, it tends to promote things that are entirely different from the previous expression methods by using the overlapping of texts combined with things that are heterogeneous. Second, the scope of its decoration has been expanded with the aid of the expression method, in which the objects that had not been used as decoration previously have been transformed into media. Third, the appearance of non-mainstream group who has suggested the anti-mainstream thought that violates the uniformed beauty of punk group has expanded the scope of classes that accept the punk fashion. Lastly, clothes, wigs and accessories have been commercialized through the permanent modification that used to signify resistance and disgust such as the expression methods of image replicas using tattoo, piercing, and transformation of hair. In doing so, punk fashion has been generalized and popularized. Such modem punk fashion reflects the change of society such as social transformation that is occupied by images thanks to its complexity and pluralism and the development of public media.

한국형 전술데이터링크 시스템 구현을 위한 무선모뎀 시스템 설계 (Radio Link Modem System Architecture Design for Korean Tactical Data Link System Implementation)

  • 최효기;장호준;송영환;장동운;주재우;서난솔
    • 한국군사과학기술학회지
    • /
    • 제16권6호
    • /
    • pp.789-796
    • /
    • 2013
  • Next Generation Weapon system from the center of the platform to share information in real-time Network Centric Warfare(NCW: Network Centric Warfare) has been changed. Data link system is defined as a network. That is, all in real-time battlefield information is to enable sharing. Data link system is classified as a precision strike, Monitoring/control, control of a Patriot missile battery systems. These systems are most effective in a Joint warfare and precision strike. Data Link Systems(Data Communications) implementation is accomplished by using the KDLM(Korean Data Link Modem) and Radio Transceiver. KDLM is operated in conjunction with the legacy Radios(re-using fielded HF/VHF/UHF radio systems). In this paper, we describe in terms of KDLM system design. In this paper, the proposed design structure is how to effectively interact with legacy various radio. First, The results provide an analysis of that Dynamic TDMA system and apply modem structure. Radio characteristics data are necessary for an effective TDMA system design. This article analyzes the test results and describes the structure to improve the receive performance.

수중 센서 네트워크를 위한 저전력 수중 통신 모뎀 연구 (A Study on a Low Power Underwater Communication Modem for Implementation of Underwater Sensor Networks)

  • 최용우;황준혁;박동찬;김석찬
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권3호
    • /
    • pp.268-273
    • /
    • 2015
  • 최근 세계 각국에서 해양자원을 확보하고 해양환경 변화를 연구하기 위해 수중 센서 네트워크 관련 연구를 활발히 진행하고 있다. 현재 사용 중인 상용모뎀은 주로 특수목적용으로 장거리, 고가, 큰 소모전력, 대형 등의 특징을 지녀수중 센서 네트워크 구현에는 적합하지 않다. 이 논문에서는 비동기식 BFSK (Binary Frequency Shift Keying) 변조방식에 따른 간단한 수신회로, 초 저전력의 MCU (Micro Control Unit), 비교적 적은 연산량과 간단한 구현으로 동기 및 수신성능을 높이는 직교부호를 사용하여 수중 센서 네트워크에 적합한 소형 저전력 수중통신 모뎀을 구현한다. 다중경로가 심한 수조 및 외해 양식장에서 성능평가를 수행하여 $10^{-4}$ 미만의 비트오류율로 통신하는 것을 보인다.

무선 LAN용 직접대역확산 방식 모뎀 아키텍쳐 설계 (Design of a DSSS MODEM Architecture for Wireless LAN)

  • 장현만;류수림;선우명훈
    • 전자공학회논문지C
    • /
    • 제36C권6호
    • /
    • pp.18-26
    • /
    • 1999
  • 본 논문에서는 무선 LAN 표준안 IEEE 802.11의 직접대역확산(Direct Sequence Spread Spectrum) 물리계층을 지원하는 기저대역 모뎀 ASIC 칩의 아키텍쳐와 설계에 대해 기술한다. 구현된 모뎀 칩은 크게 송신부와 수신부로 구성되어 있으며, CRC 부호화/복호화기, 차동 부호화/복호화기, 주파수 옵셋 보상기(frequency offset compensator) 및 타이밍 복구 회로를 포함한다. 구현된 모뎀 칩은 4, 2 및 1Mbps의 다양한 데이타 전송률을 지원하고, DBPSK와 DQPSK의 변조방식을 사용한다. 구현한 모뎀 아키텍쳐는 $SAMSUNG^{TM}$ $0.6{\mu}m$ 게이트 어레이 라이브러리(gate array library)를 사용하여 논리합성을 수행하였으며, 칩의 전체 게이트 수는 53,355개이다. 칩의 동작 주파수는 44MHz이며, 칩의 패키지는 100-pin QFP이고, 전력소모는 44MHz에서 1.2watt이다. 구현된 모뎀 아키텍쳐는 상용화된 HSP3824 칩 보다 우수한 BER성능을 나타낸다.

  • PDF

중계 프로토콜을 위한 TDMA 기저대역 중계모뎀의 최적 설계 (An Optimal Design of a TDMA Baseband Modem for Relay Protocol)

  • 배용욱;안병철
    • 전자공학회논문지
    • /
    • 제51권6호
    • /
    • pp.124-131
    • /
    • 2014
  • 본 논문은 무선 개인영역네트워크 환경에서 중계 프로토콜 기능을 가진 시분할다중접속방식(TDMA)의 적응형 기저대역 중계모뎀을 설계한 내용을 기술한다. 설계한 기저대역 중계모뎀은 마스터 동기 신호에 의해 제어되며 최대 14홉의 중계 네트워크를 구성할 수 있다. 효과적인 데이터 중계 통신을 위해 단일포트 메모리에서 우선권을 사용하여 내부 버퍼 설계를 최적화하였다. 그리고 메모리 버스 제어기는 합성된 게이터 수를 최소화시킬 수 방법으로 설계하였다. 협대역 TDMA 중계 통신의 동기 기능을 구현하기 위하여 네트워크 슬롯 동기회로와 프레임 동기회로를 분리하여 게이트수를 줄였다. 이 방법을 사용하여 9만 게이트의 Xilinx FPGA XC6SLX9에서 약 37%(34,000게이트)를 사용하였다. 32비트 싱크워드를 사용한 1024비트 프레임의 통신 수신율은 약 96.4%이다. 설계된 기저대역 중계모뎀을 사용하여 14홉의 중계에서 측정한 최대전송지연시간은 230.4ms이다.

Ubiquitous 통신을 위한 Acoustic 모뎀의 동기부 성능을 개선하는 새로운 M진 상태천이 주파수 쉬프트 키잉 변조 기법 (New M-ary Differential-Frequency Shift Keying Modulation Enhancing Acoustic Modem's Synchronization For Ubiquitous Communication)

  • 김은기;김영주;이인성
    • 대한전자공학회논문지TC
    • /
    • 제43권1호
    • /
    • pp.25-32
    • /
    • 2006
  • 주파수 쉬프트 키잉(FSK, Frequency Shift Keying) 기법을 이용하는 acoustic 모뎀[2]에서 복조기 심벌 동기 성능을 개선하는 새로운 M진 상태천이 주파수 쉬프트 키잉 변조기법을 제안하다 기존의 방식은 동일한 심벌을 연속하여 전송할 경우 복조기 동기부 성능이 저하되는 문제점이 있다. 제안하는 방식은 전송되는 매 심벌마다 항상 다른 주파수로 천이하면서 변조되므로, 복조기 동기부에서 심벌 동기 획득 성능을 획기적으로 향상시킬 수 있고, 또한 간단한 변복조 구조 및 프레임 구조를 갖는다. 한편 M진 FSK의 심벌 동기 획득 기법인 modulation-derived synchronization(MDS)을 개선하고 성능을 분석한다. 마지막으로 제안하는 기법을 주파수 효율 측면에서 고찰하여 acoustic 모뎀에 적합함을 증명한다.

CDMA 모뎀을 이용한 원격 제어 및 계측 시스템 구현 (The implementation of the Remote Control and Measurement Systems using CDMA Modem)

  • 이명의
    • 한국항행학회논문지
    • /
    • 제16권2호
    • /
    • pp.351-359
    • /
    • 2012
  • 본 논문에서는 CDMA 데이터 모뎀을 이용하여 원격에서 다양한 입출력 장치들의 상태를 계측하거나 이들을 제어하는 시스템을 설계하고 개발한다. 그리고 TCP/IP 패킷 통신과 단문자서비스(SMS) 통신방식을 이용하여 공인 IP 주소를 갖지 않는 CDMA 모뎀 장치들을 위한 양방항 데이터 통신 방식을 제안한다. 설계된 원격 제어 및 계측시스템은 DCE로 Telit WM-800 모뎀과 DTE로서 Atmel AT89C51 마이크로컨트롤러를 사용하여 구현되었다. 제어 및 계측 시스템 사용자를 위한 사용자 응용 프로그램, 그리고 디지틀 입출력 장치, AD/DAC, LCD, 및 온습도 센서 등의 펌웨어 구동장치 프로그램은 보다 다양한 종류의 응용을 위하여 각각 Microsoft C 및 Keil C 언어를 사용하여 작성되었다. 본 논문에서 구현된 제어 및 계측 시스템의 실험결과는 실제 실시간 실험을 통해, 설계된 바와 같이 사용자가 원하는 동작을 정확하게 수행하는 것을 확인하였다.