• Journal of Yeungnam Medical Science
• /
• v.12 no.1
• /
• pp.96-104
• /
• 1995

The transarterial embolization has been widely used to control bleeding. It has a variety of clinical utility; to reduce bleeding on the surgical field, to reduce the size of malignant tumor as a preopearative treatment, to treat arteriovenous malformation or arterial aneurysm as a curative method and to promote life quality of patient with diffuse or multiple hepatocellular carcinoma as a palliative treatment, etc. With the advance of modem technology, various embolic materials have been also developed. However, it has not been fully investigated of histopathologic changes of the embolized organs according to the embolic materials used. This study was undertaken to investigate the histopathologic changes of embolized renal artery in rabbit by various embolic materials, according to each embolic material and to time passed by after embolization. Of the 5 arteries embolized by ethylene vinyl alcohol copolymer(EVAL), one showed abscess formation in embolized kidney. The other 4 allowed to perform further pathologic study: within a week after embolization there was no any specific change in vessels, however, minimal endothelial hypertrophy was observed following 2 weeks of embolization. Of the 8 renal arteries embolized by N-buthyl-2-cyanoacrylate(Histoacryl), 4 showed total occlusion of the main renal arteries as well as renal infarction, which reflects the strong adhesiveness of Histoacryl to vascular wall. The other 4 showed fibrinoid degeneration in vascular wall within a week. However, further change was not observed thereafter. In all the 5 renal arteries embolized by polyvinyl alcohol(Ivalon), there were infiltration of inflammatory cells along the vessel walls, within one week, which represents vasculitis. They showed some fibrosis with appearance of giant cells in the vessel wall two weeks after embolization and also showed marked fibrosis of connective tissues surrounding vessels two months after embolization, respectively. The results suggest that EVAL is useful for the embolization of hypervascular lesion with limited arteriovenous fistula, Histoacryl for the curative treatment of the lesion with high blood flow or severe arteriovenous fistula, and Ivalan for palliative treatment of malignant tumor or arteriovenous malformation, respectively.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2007

In KORDI (Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI (Geostationary Ocean Color Imager) instrument which is loaded on COMS (Communication, Ocean and Meteorological Satellite); it will be launched in 2008. Ansan (the headquarter of KORDI) has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified into antenna and RF. Antenna is designed to be $\phi$ 9m cassegrain antenna which has 19.35 G/T$(dB/^{\circ}K)$ at 1.67GHz. RF module is divided into LNA (low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem. The existing building is re-designed and arranged for the KOSC operation concept; computing room, board of electricity, data processing room, operation room. Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet. and it is also being considered constructing outer data distribution system as a web hosting service for offering received data to user less than an hour.

• The Korean Journal of Archival Studies
• /
• no.15
• /
• pp.95-140
• /
• 2007

This study is focused on clarifying the Joseon Dynasty Period's records management system mentioned on Kyeonggukdaejeon(經國大典). Through out investigations of the legislations of public records in 'creating stage', it was revealed. that is, records in creating stage had characters of original records and those was managed as the records themselves and circulated by sending and receiving, and finally those was kept and used in each agency. Through out investigations of the legislations of public records in 'management stage', it was revealed that is, as the Records Management Organization the Chunchukwan(春秋館) was a government agency that is composed by 15 central government agencies' concurrent officials(兼任史官) and took charge of both records creating and records management, and was a central government body for compilation of the Sillok(實錄). As National Archives the Sillok was not accessible at that time. In this point the Sillok is basically different from modem archives that is preserved for use. And the Sillok was compiled from original records, In this point the Sillok is basically different from modern archives that is arranged from original records.

• Composites Research
• /
• v.19 no.1
• /
• pp.29-35
• /
• 2006

The avoidance of enemy's radar detection is very important issue in the modem electronic weapon system. Researchers have studied to minimize reflected signals of radar. In this research, two types of radar absorbing structure (RAS), 'C'-type shell and 'U'-type shell, were fabricated using fiber-reinforced composite materials and their radar cross section (RCS) were evaluated. The absorption layer was composed of glass fiber reinforced epoxy and nano size carbon-black, and the reflection layer was fabricated with carbon fiber reinforced epoxy. During their manufacturing process, undesired thermal deformation (so called spring-back) was observed. In order to reduce spring-back, the bending angle of mold was controlled by a series of experiments. The spring-back of parts fabricated by using compensated mold was predicted by finite element analysis (ANSYS). The RCS of RAS shells were measured by compact range and predicted by physical optics method. The measured RCS data was well matched with the predicted data.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.4
• /
• pp.357-365
• /
• 2006

The purpose of the study w3s to investigate the consumption pattern of the Korean traditional foods of the elementary schoolchildren living in urban and rural area. For the investigation, 373 fifth-grade elementary schoolchildren in Incheon and Gangwhado were surveyed by a questionnaire and the data were analyzed by the SPSS 10.0 program. As for the frequency to take the Korean traditional foods, bab and kimchi are taken almost everyday, and gug, jjigae, jorim, gui, namul are taken frequently. And juk, jeongol, jeon, sanjeog, jutgal, hangwa and umryo were shown to be taken occasionally. There were statistical differences in the frequencies of the Korean traditional food consumption by the residence and the gender. The students in urban area take hinbab, jabgokbab, hobakjuk deonjanggug, sangsunjorim, jangiorim more frequently than the students in rural area. The students in rural area take mandu, kuksoo, yeongunjorim and kongiorim more frequently than the students in urban area Female students take sangsunjorim, jangiorim, sangsungui, bulgogi, sangsunjeon, hobakjeon, sukchae, jutgal and oiji more frequently than male students. Most of the schoolchildren answered that in the future they would like to take the traditional foods more frequently than now. There was statistical difference by the gender. As for the food such as bibimbab, gug, jjigae, jeon, namul and jang-aji, female students responded to take more frequently than male students. The 39.1% of them responded that the taste is the point to be most improved in the future. But there was no statistical difference by gender and the residence In order to make the taste of traditional food more attractive to modem people, the 37.8% of them replied it does not need to change the traditional preparation method. However, similar percentage of the schoolchildren(35.7%) answered it is needed to change partly the traditional preparation method. As for the effect of traditional foods on health, the 68.4% of schoolchildren thought that the our traditional foods are healthier than western foods.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.269-269
• /
• 2022

Pre-harvest sprouting (PHS) on rice panicles is getting problematic in recent several years in Korea due to climate changes such as high temperature and more frequent typhoons during harvesting season. PHS negatively affects grain quality severely and also yield. Genetic improvement of Korean varieties (Oryza sativa ssp. japonica) through a marker assisted-backcross breeding (MAB) with the known PHS resistant genes must be one of ideal solutions. However, the final breeding products of MAB occasionally exhibit unwanted traits, especially the cross between genetically distant parents. This might be caused by linkage drag and/or presence of the gene-unlinked donor introgressions, resulting that the final products could not be released to the farmers. The major PHS resistance gene, Sdr4 (Seed dormancy 4) originated from an indica cultivar, Kasalath was selected as a donor gene. In order to avoid unexpected phenotypes in the breeding products, we performed a precision marker-based breeding (PMBB) consisting of foreground, recombinant, and background selections (FS, RS, and BS) which aim to develop 'single small introgression lines' (~100 kb introgression). Korean varieties (Ilpum and Gopum) were crossed with Kasalath. We developed Sdr4-allele specific markers for FS and a set of polymorphic flanking markers near the Sdr4 (-350kb and +420kb) for RS. To minimize linkage drag, the small introgression (< 125kb) containing Sdr4 was selected in Ilpum background (BC₂F₄) through 1^st RS with ~1,200 F₂ or BC₁F₂ plants (one side trimmed) and then 2^nd RS with ~1,000 progenies from the 1^st RS selected plants (another side trimmed). After RS, the selected lines were genotyped by using Infinium 7K SNP chip to detect other donor introgressions and the lines were backcrossed. Currently BS is on-going from the backcross-derived progenies with BS markers to remove residual introgressions. During the PMBB process, genetic effect of Sdr-4-Kasalath allele was confirmed in Ilpum and Gopum backgrounds by PHS phenotyping using the segregating BC₂F₃ or BC₁F₄ materials. The Sdr4 PMBB lines in Ilpum background (< 125kb introgression) will be valuable genetic resources to improve PHS resistance in modem popular temperate japonica varieties.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.53-53
• /
• 2022

Modem agricultural production needs to provide sustainable management practices that are eco-friendly and low cost. Plant extracts are a cost-effective and environmentally friendly alternative to synthetic plant growth regulators. This study was therefore carried out to investigate the effects of various plant extracts produced using different extraction methods on the vegetative growth of rice under laboratory and greenhouse conditions. For this study, seventeen plant extracts were made from plant species such as leaves of M. arvense, C. asiatica, M. oleifera, V. radiata, V. unguiculate, P. guajava, A. vera, and A. tuberosum, aboveground plant parts of C. rotundus, M. sativa, and P. frutescens, roots of R. undulatum, tubers of A. sativum, leaves and stems of G. max (cv. Taegwang) as well as rice straw and hulls (cv. Hopyeong). As a test crop, we applied these extracts to rice plants. For the purpose of making our extracts, some plant materials and species were collected in fields and others were purchased from Chonnam Hanyaknonghyup Cooperation (South Korea). Leaves, roots, and aboveground plant parts of plant species were dried, ground, extracted (water, boiling water and ethanol) and fermented. Rice growth promotion effects were determined using plant extracts at 0, 0.05, 0.1, 0.5, and 1% concentrations under petri dish conditions. Seven selected plant extracts were applied to rice seeds with soil drench application or seedling at 3-4 leaf stages with soil and foliar applications under greenhouse conditions. For comparison with extracts, we used urea at 0.6%. Of the 17 water extracts used in this study, 10 extracts reduced rice growth, but the other 7 extracts (P. guajava, A. vera, A. tuberosum, M. sativa, A. sativum, and G. max) increased growth by 40-60% on compared to the control in Petri dish bioassay. Thus, these 7 extracts were selected for further study. Under greenhouse conditions, rice growth also increased by 20-40% when the same 7 extracts were applied to rice seeds using soil drench application. Furthermore, at the 3-4 leaf stage rice growth also increased 30-80% or 30-60% when the same 7 extracts were applied using soil and foliar applications. Overall, the 7 extracts produced higher rates of growth promotion when soil drench application was used than when foliar application was used. In the case of boiling water and ethanol extracts, rice growth increased only 20% in response to both soil drench and foliar application of the same 7 extracts. Rice growth promotion was greater when extracts were produced using water extraction method than boiling water and ethanol extraction methods. Most notably, the 7 water extracts used in this study produced higher rates of growth promotion than urea at 0.6% which is typically used for crop growth promotion. Overall, the 7 water extracts when applied using soil drenching method can be used as effective growth promotors of rice in organic agriculture.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.93-98
• /
• 2023

In paddy rice farming, water management is a critical task. To suppress weed emergence during the early stages of growth, fields are deeply flooded, and after transplantation, the water level is reduced to promote rooting and stimulate stem generation. Later, water is drained to prevent the production of sterile tillers. The adequacy of water supply is influenced by various factors such as field location, irrigation channels, soil conditions, and weather, requiring farmers to frequently check water levels and control the ingress and egress of water. This effort increases if the fields are scattered in remote locations. Automated irrigation systems have been considered to reduce labor and improve productivity. However, the net income from rice production in 2022 was about KRW 320,000/10a on average, making it financially unfeasible to implement high-cost devices or construct new infrastructure. This study focused on developing an IoT-Based irrigation valve that can be easily integrated into existing agricultural infrastructure without additional construction. The research was carried out in three main areas: Firstly, an irrigation valve was designed for quick and easy installation on existing agricultural pipes. Secondly, a power circuit was developed to connect a low-power Cat M1 communication modem with an Arduino Nano board for remote operation. Thirdly, a cloud-based platform was used to set up a server and database environment and create a web interface that users can easily access.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.401-411
• /
• 2002

Precise bracket positioning is essential in modem orthodontics. However, there can be alterations in the vertical position of a bracket due to several reasons. The purpose of this study was to evaluate the effect of variations in the vertical bracket position on the crown inclination in Korean patients with normal occlusion. From a larger group of what was considered to be normal occlusions obtained from the Department of Orthodontics, College of Dentistry, Seoul National University, each of the final 10 subjects (6 males and 4 females, with an average age of 22.3 yews) was selected. The dental models of each of the subjects were scanned three-dimensionally by a laser scanner, and measurements drawn from these were made on the scanned dental casts of the subjects were input into the computer program. From this the occlusal plane and the bracket plane were determined. The tooth plane was then constructed to measure the crown inclination on the bracket plane of each tooth. From a practical standpoint, information was obtained on the extent to which the torque of a tooth would be changed as the bracket position was to be moved vertically (in ${\pm}0.5mm,\;{\pm}1.0mm,\;{\pm}1.5mm$) from its ideal position. A one way analysis of the variance (ANOVA) was used to compare each group of the different vertical distances from the bracket plane on a specific tooth. Duncan's multiple comparison test was then performed. There were statistically significant differences in the crown inclination among the groups of different vertical distances for the upper central incisor, upper lateral incisor, upper canine, upper first and second molars, lower first and second premolars, and lower first and second molars (p<0.05). On the upper anterior teeth, upper molars, lower premolars and lower molars, the resultant torque values due to the vertical displacement of the bracket were different depending on the direction of the displacement, occlusal or gingival. This study implies that the torque of these teeth should be handled carefully during the orthodontic treatment. In circumstances in which the bracket must be positioned more gingivally or occlusally due to various reasons, it would be useful to provide the chart of torque alteration of each tooth referred to in this study with its specified bracket prescription.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.58-67
• /
• 2009

This paper presents a fully digital gain control system with a new high bandwidth and wide dynamic range power detector for DVB-S2 application. Because the peak-to-average power ratio (PAPR) of DVB-S2 system is so high and the settling time requirement is so stringent, the conventional closed-loop analog gain control scheme cannot be used. The digital gain control is necessary for the robust gain control and the direct digital interface with the baseband modem. Also, it has several advantages over the analog gain control in terms of the settling time and insensitivity to the process, voltage and temperature variation. In order to have a wide gain range with fine step resolution, a new AGC system is proposed. The system is composed of high-bandwidth digital VGAs, wide dynamic range power detectors with RMS detector, low power SAR type ADC, and a digital gain controller. To reduce the power consumption and chip area, only one SAR type ADC is used, and its input is time-interleaved based on four power detectors. Simulation and measurement results show that the new AGC system converges with gain error less than 0.25 dB to the desired level within $10{\mu}s$. It is implemented in a $0.18{\mu}m$ CMOS process. The measurement results of the proposed IF AGC system exhibit 80-dB gain range with 0.25-dB resolution, 8 nV/$\sqrt{Hz}$ input referred noise, and 5-dBm $IIP_3$ at 60-mW power consumption. The power detector shows the 35dB dynamic range for 100 MHz input.