• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.156-163
• /
• 2003

This research presents modeling of a functional surface which is a constructed free-formed surface. The modeling introduced in this paper adopts modified B-spline that is utilizing approximating technique. The modified B-Spline is constructed with altered control vertices. It is applied to measure points on a surface of an impeller blade. This research builds a surface-modeler accepting inputs of measured points. Generation of cutter-paths for NC machining employs the model of the constructed surfaces. The machined surfaces which is generated in several cases are compared in the aspect of machining accuracy.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.195-198
• /
• 2006

One of the major sources of error in precise GPS positioning since the turn-off the Selective Availability(SA) is the ionospheric propagation delay. For the last decades, a lot of the ionospheric researches based on a GPS network have been implemented throughout the world. Especially researches of the ionospheric modeling for Wide Area Argumentation System(WAAS) have been undertaken and published. In mid-latitude regions, typical spatial and temporal variations in ionospheric models delay tend to minimal. The developed ionospheric model calls for a 1.25 degree grid at latitudes and a 2.5 degree grid at longitudes. The precise grid TEC estimated by the inversion technique is also compared with global ionosphere maps(GIMs) which have been provided by several analysis centers(ACs). The results of initial investigations into the suitability of the proposed ionospheric modeling scheme in north-east Asia are presented.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.199-202
• /
• 2006

One of the major sources of error in precise GPS positioning since the turn-off the Selective Availability(SA) is the ionospheric propagation delay. For the last decades, a lot of the ionospheric researches based on a GPS network have been implemented throughout the world. Especially researches of the ionospheric modeling for Wide Area Argumentation System(WAAS) have been undertaken and published. In mid-latitude regions, typical spatial and temporal variations in ionospheric models delay tend to minimal. The developed ionospheric model calls for a 1.25 degree grid at latitudes and a 2.5 degree grid at longitudes. The precise grid TEC estimated by the inversion technique is also compared with global ionosphere maps(GIMs) which have been provided by several analysis centers(ACs). The results of initial investigations into the suitability of the proposed ionospheric modeling scheme in north-east Asia are presented.

• Industrial Engineering and Management Systems
• /
• 제7권1호
• /
• pp.9-22
• /
• 2008

As an extension of a previous work by the authors (Song and Esogbue, 2006), a new algorithm for automated modeling of nonstationary seasonal time series is presented in this paper. Issues relative to the methodology for building automatically seasonal time series models and periodic time series models are addressed. This is achieved by inspecting the trend, estimating the seasonality, determining the orders of the model, and estimating the parameters. As in our previous work, the major instruments used in the model identification process are correlograms of the modeling errors while the least square method is used for parameter estimation. We provide numerical illustrations of the performance of the new algorithms with respect to building both seasonal time series and periodic time series models. Additionally, we consider forecasting and exercise the models on some sample time series problems found in the literature as well as real life problems drawn from the retail industry. In each instance, the models are built automatically avoiding the necessity of any human intervention.

• 한국멀티미디어학회논문지
• /
• 제25권1호
• /
• pp.61-71
• /
• 2022

When communication such as light, radio wave, or magnetic field is used underwater, the communication distance is very short, so sound waves are mainly used. However, by combining the strengths of each medium and communicating, stable communication may be possible. Underwater multi-media communication requires a protocol stack that supports it, which is very complex. To this end, this paper proposes a standard protocol stack and modeling technique to enable easy protocol stack modeling for the purpose. In fact, in this paper, a random model was created and analyzed through the proposal of modeling elements and similarity measurement methods, and as a result, it was analyzed that it was very helpful in creating a new model based on a standard model.

• 한국응급구조학회지
• /
• 제26권2호
• /
• pp.19-35
• /
• 2022

Purpose: This study aimed to identify research topics in the emergency medical technician (EMT) field and examine research trends. Methods: In this study, 261 research papers published between January 2000 and May 2022 were collected, and EMT research topics and trends were analyzed using topic modeling techniques. This study used a text mining technique and was conducted using data collection flow, keyword preprocessing, and analysis. Keyword preprocessing and data analysis were done with the RStudio Version 4.0.0 program. Results: Keywords were derived through topic modeling analysis, and eight topics were ultimately identified: patient treatment, various roles, the performance of duties, cardiopulmonary resuscitation, triage systems, job stress, disaster management, and education programs. Conclusion: Based on the research results, it is believed that a study on the development and application of education programs that can successfully increase the emergency care capabilities of EMTs is needed.

• Computers and Concrete
• /
• 제33권3호
• /
• pp.325-340
• /
• 2024

The growing demands for sustainable and high-performance construction materials necessitate a deep understanding of their physicochemical properties by that of these heterogeneities. This paper presents a comprehensive review of the state-of-the-art hierarchical multiscale modeling approach aimed at predicting the intricate physicochemical characteristics of construction materials. Emphasizing the heterogeneity inherent in these materials, the review briefly introduces single-scale analyses, including the ab initio method, molecular dynamics, and micromechanics, through a scale-bridging technique. Herein, the limitations of these models are also overviewed by that of effectively scale-bridging methods of length or time scales. The hierarchical multiscale model demonstrates these physicochemical properties considering chemical reactions, material defects from nano to macro scale, microscopic properties, and their influence on macroscopic events. Thereby, hierarchical multiscale modeling can facilitate the efficient design and development of next-generation construction.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.221-233
• /
• 2016

This paper deals with performance assessment of the kinematic network-based GPS positioning technique with a view to using it for ellipsoidally referenced bathymetric surveys. To this end, two field trials were carried out on a land vehicle and a surveying vessel. Single-frequency GPS data acquired from these tests were processed by an in-house software which equips the network modeling algorithm with instantaneous ambiguity resolution procedure. The results reveals that ambiguity success rate based on the network model is mostly higher than 99.0%, which is superior to that of the single-baseline model. In addition, achievable accuracy of the technique was accessed at ${\pm}1.6cm$ and 2.7 cm with 95% confidence level in horizontal and vertical component respectively. From bathymetric survey at the West Nakdong River in Busan, Korea, 3-D coordinates of 2,011 points on its bed were computed by using GPS-derived coordinates, attitude, measured depth and geoid undulation. Note that their vertical coordinates are aligned to the geoid, the so-called orthometric height which is widely adopted in river engineering. Bathymetry was constructed by interpolating the coordinate set, and some discussion on its benefit was given at the end.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.63-72
• /
• 2006

The purpose of this raper is to address the negative impedance instability in DC/DC converters. We present the negative impedance instability of PWM DC/DC converters loaded by constant power loads (CPLs). An approach to design digital controllers for DC/DC converters Is presented. The proposed method, called Power Alignment control technique, is applied to DC/DC step-down choppers operating in continuous conduction or discontinuous conduction modes with CPLs. This approach uses two predefined state variables instead of conventional pulse width modulation (PWM) to regulate the output voltage. A comparator compares actual output voltage with the reference and then switches between the appropriate states. It needs few logic gates and comparators to be implemented thus, making it extremely simple and easy to develop using a low-cost application specific integrated circuit (ASIC) for converters with CPLs. Furthermore, stability of the proposed controllers using the small signal analysis as well as the second theorem of Lyapunov is verified. Finally, simulation and analytical results are presented to describe and verify the proposed technique.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.1-10
• /
• 2005

This paper presents an embodiment of design integration framework corresponding to changes in the latest manufacturing environment. The embodied system is named by 'WEB-KBE System' because it supports a product design with a KBE technique based on web environment. The final purpose of the work is to implement a web-based integration design environment with a KBE technique to support non-skillful designers. The framework of the system Is designed to support necessary items in user-centric design environment. Two case studies were applied to the WEB-KBE system to evaluate the efficiency, flexibility, extensibility, and reusability of the system. The examples are [1] CART integration design environment construction and (2) Exhaust Duct Saddle Support integration design environment construction. In the former case, it took a period of 8 months for modeling and implementation of the WEB-KBE prototype system. However, with the high extensibility and reusability of WEB-KBE system, the second case required only a period of one month for modeling and implementation of the system. We conclude that the presented WEB-KBE system can bring fair effects on implementing a knowledge based design environment in aspect of time and expense.