• 제목/요약/키워드: Modeling Error Compensation

검색결과 78건 처리시간 0.026초

비전기반 암 로봇의 퍼지제어기 설계 (Design of Fuzzy Controller for Vision-based Arm Robot)

  • 신화영;김영중;임묘택
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.485-488
    • /
    • 2002
  • In this paper, fuzzy logic controllers are designed for compensation of distance errors. Because we can't know information of the depth in a mono camera, these errors are occurred. Also, they are increased as a target object is to keep away from a center of image. Therefore, the errors for each position of joints of an arm robot should be modeled, but accurate models can't be obtained because of no information of the depth, uncertain feature points of image, parameter uncertainties, and illumination. Hence, fuzzy logic controllers for each error are designed for compensation. This paper consists of color image processing, error modeling, and the controller design. Experimental results are given to verify the effectiveness of our proposed method.

  • PDF

장거리 병렬 송전선로용 대지 정전용량 보상에 의한 고장점 표정 알고리즘 (Fault Location Algorithm with Ground Capacitance Compensation for Long Parallel Transmission Line)

  • 박철원;김삼용;신명철
    • 전기학회논문지P
    • /
    • 제54권4호
    • /
    • pp.163-170
    • /
    • 2005
  • This paper deals with an improved fault location algorithm with compensation ground capacitance through distributed parameter for a long parallel T/L. For the purpose of fault locating algorithm non-influenced by source impedance and fault resistance, the loop method was used in the system modeling analysis. This algorithm uses a positive and negative sequence of the fault current for high accuracy of fault locating calculation. Power system model of 160km and 300km long parallel T/L was simulated using EMTP software. To evaluate of the proposed algorithm, we used the several different cases 64 sampled data per cycle. The test results show that the proposed algorithm was minimized the error factor and speed of fault location estimation.

A review on recent development of vibration-based structural robust damage detection

  • Li, Y.Y.;Chen, Y.
    • Structural Engineering and Mechanics
    • /
    • 제45권2호
    • /
    • pp.159-168
    • /
    • 2013
  • The effect of structural uncertainties or measurement errors on damage detection results makes the robustness become one of the most important features during identification. Due to the wide use of vibration signatures on damage detection, the development of vibration-based techniques has attracted a great interest. In this work, a review on vibration-based robust detection techniques is presented, in which the robustness is considerably improved through modeling error compensation, environmental variation reduction, denoising, or proper sensing system design. It is hoped that this study can give help on structural health monitoring or damage mitigation control.

Dynamic Modeling-based Flight P-PD Controller Applied to a Quadrotor

  • Jin, Tae-Seok
    • 한국산업융합학회 논문집
    • /
    • 제25권4_1호
    • /
    • pp.513-519
    • /
    • 2022
  • In this paper, we describe performances of P-PD controllers in the quadrotor system with steady-state error compensation by adding a corrective term to the system input. A decentralized control system using P-PD controllers was successfully implemented on a quadrotor platform. We also presented the results of a mathematical modeling analysis for control the quadrotor and experimental results for each response performance according to the heading reference value in accordance with the mathematical modeling and P-PD controller design. A control experiment with the real system was implemented for the test platform, and the results were evaluated and compared.

Modeling and Control Design of Dynamic Voltage Restorer in Microgrids Based on a Novel Composite Controller

  • Huang, Yonghong;Xu, Junjun;Sun, Yukun;Huang, Yuxiang
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권6호
    • /
    • pp.1645-1655
    • /
    • 2016
  • A Dynamic Voltage Restorer (DVR) model is proposed to eliminate the short-term voltage disturbances that occur in the grid-connected mode, the switching between grid-connected mode and the stand-alone mode of a Microgrid. The proposed DVR structure is based on a conventional cascaded H-bridge multilevel inverter (MLI) topology; a novel composite control strategy is presented, which could ensure the compensation ability of voltage sag by the DVR. Moreover, the compensation to specified order of harmonic is added to implement effects that zero-steady error compensation to harmonic voltage in specified order of the presented control strategy; utilizing wind turbines-batteries units as DC energy storage components in the Microgrid, the operation cost of the DVR is reduced. When the Microgrid operates under stand-alone mode, the DVR can operate on microsource mode, which could ease the power supply from the main grid (distribution network) and consequently be favorable for energy saving and emission reduction. Simulation results validate the robustness and effective of the proposed DVR system.

Application of Surrogate Modeling to Design of A Compressor Blade to Optimize Stacking and Thickness

  • Samad, Abdus;Kim, Kwang-Yong
    • International Journal of Fluid Machinery and Systems
    • /
    • 제2권1호
    • /
    • pp.1-12
    • /
    • 2009
  • Surrogate modeling is applied to a compressor blade shape optimization to modify its stacking line and thickness to enhance adiabatic efficiency and total pressure ratio. Six design variables are defined by parametric curves and three objectives; efficiency, total pressure and a combined objective of efficiency and total pressure are considered to enhance the performance of compressor blade. Latin hypercube sampling of design of experiments is used to generate 55 designs within design space constituted by the lower and upper limits of variables. Optimum designs are found by formulating a PRESS (predicted error sum of squares) based averaging (PBA) surrogate model with the help of a gradient based optimization algorithm. The optimum designs using the current variables show that, to optimize the performance of turbomachinery blade, the adiabatic efficiency objective is improved substantially while total pressure ratio objective is increased a very small amount. The multi-objective optimization shows that the efficiency can be increased with the less compensation of total pressure reduction or both objectives can be increased simultaneously.

시선 안정화 시스템의 고 정밀 적응제어 (Adaptive High Precision Control of Lime-of Sight Stabilization System)

  • 전병균;전기준
    • 제어로봇시스템학회논문지
    • /
    • 제7권1호
    • /
    • pp.1155-1161
    • /
    • 2001
  • We propose an adaptive nonlinear control algorithm for high precision tracking and stabilization of LOS(Line-of-Sight). The friction parameters of the LOS gimbal are estimated by off-line evolutionary strategy and the friction is compensated by estimated friction compensator. Especially, as the nonlinear control input in a small tracking error zone is enlarged by the nonlinear function, the steady state error is significantly reduced. The proposed algorithm is a direct adaptive control method based on the Lyapunov stability theory, and its convergence is guaranteed under the limited modeling error or torque disturbance. The performance of the pro-posed algorithm is verified by computer simulation on the LOS gimbal model of a moving vehicle.

  • PDF

리니어모터 스테이지 진직도 보상 제어

  • 강민식;최정덕
    • 한국반도체및디스플레이장비학회:학술대회논문집
    • /
    • 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
    • /
    • pp.11-14
    • /
    • 2007
  • An additive servo-system is developed to improve straightness of linear motor stages. For linear motor stages used in the field of high-precision linear motion process, high straightness accuracy is necessary as well as positioning accuracy in the longitudinal axis. In such cases, machining and assembling cost increases to improve the straightness accuracy. An electro-magnetic actuator which is relatively cost effective than any other conventional servo-systems is suggested to compensate the fixed straightness error. To overcome the compensation error due to modeling error and friction disturbance, a sliding mode control is addressed. The effectiveness of the suggested mechanism and the control are illustrated along with some experimental results.

  • PDF

칩마운터를 위한 통합 오차 측정 및 평가 시스템 개발에 관한 연구 (A study on the development of the integrated error measurement and calibration system for a chip mounter)

  • 이동준;문준희;박희재;정상호
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.366-370
    • /
    • 2002
  • A kinematic ball bar measurement system can analyze the various errors of a machine tool easily and rapidly in a procedure and can measure many types of equipment such as chip mounter, PCB router, precision stage, etc. In this paper, the thermally induced errors are loused among various errors of a chip mounter because it affects the accuracy of the machine very much. Linear regression technique is adapted for the thermal error modeling. While the measurement and calibration of a chip mounter is difficult in general, this developed system is not only easy to apply for it but also improves the accuracy by 4 times or more.

  • PDF

Eigenface를 이용한 얼굴인식에서의 영상등록 오차 보정 (Registration Error Compensation for Face Recognition Using Eigenface)

  • 문지혜;이병욱
    • 한국통신학회논문지
    • /
    • 제30권5C호
    • /
    • pp.364-370
    • /
    • 2005
  • 얼굴 인식에서는 입력 영상에서 얼굴을 검출한 후에 데이터베이스의 영상과 위치와 크기를 일치시키는 등록 과정이 필요하다. 본 논문에서는 영상의 등록 과정에서 발생하는 얼굴영상의 이동, 회전, 혹은 크기의 차이를 eigenspace에서 보정하는 알고리즘을 제안하였다. 이를 위하여 얼굴 영상의 수직, 수평 이동, 회전, 크기 변환 등의 등록오차를 선형보간 행렬로 근사하였다. 각 변환행렬을 사용하여 등록오차에 따른 미분계수를 eigenspace에서 구하면 subpixel 단위의 등록 오차를 보정할 수 있다. 제안된 방법은 공간 영역에서 오차를 보정하는 것보다 계산량이 훨씬 더 적다. 오차 보정 후 얼굴 인식률이 크게 향상되는 것을 실험으로 확인하였다.