• 정보처리학회논문지D
• /
• 제14D권1호
• /
• pp.57-66
• /
• 2007

소프트웨어 산업의 발전에 따라 소프트웨어 개발조직에서는 소프트웨어 품질이 중요한 이슈로 부각되었다. 특히 여러 종류의 테스트 성숙도 모델을 통해 조직의 소프트웨어 테스트 성숙도 향상에 대해 다양한 방면으로 시도하고 있다. 하지만 현재 테스트 성숙도를 측정할 수 있는 모델들은 기존의 개발 성숙도 측정 모델을 기반으로 개발하여 테스트 부분에 대한 언급이 부족하고 단지 테스트 성숙도 레벨만을 측정하였다. 이러한 문제점을 해결하기 위해 소프트웨어 개발프로세스와 한께 테스트 프로세스를 수행할 수 있도록 이중 V모델과 테스트 성숙도의 용이한 평가를 위한 테스트 평가 속성과 레벨을 정의한 테스트 속성과 상호관련 매트릭스를 제안하였다. 테스트 프로세스 개선(Test Process Improvement: TPI)의 개선제안(Improvement Suggestion) 방법을 통해 테스트 성숙도 모델 확장하고, 측정된 성숙도를 향상시킬 수 있는 개선방향을 제시한다. 또한, 본 연구에서 제안하는 테스트 성숙도 상호관련 매트릭스는 테스트 성숙도를 정량적으로 평가하기 위해 사용하였다. 결과적으로는 확장된 테스트 성숙도 모델을 통해 조직의 테스트 성숙도를 높이는데 기여 할 수 있으리라 생각한다.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.101-106
• /
• 2007

In this paper, the authors demonstrate a new idea to take the place of the real pressure vessel test, which should be carried out in a high pressure experiment unit before the real sea trial test. The idea is to make a pressure vessel model as a replica of the real pressure vessel test, which can reduce the cost of making a pressure vessel and large pressure experiment unit. The pressure vessel model was designedbased on linear-elastic, buckling equations and Finite Element Analysis. The manufactured pressure vessel model was investigated and monitored while the pressure test was being conducted. After the test, the result and the validity of the pressure vessel model as a replica of the real pressure vessel test was studied.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.362-367
• /
• 2003

To improve the reliability of seismic hazard assessment of historic earthquake, shaking table test of a 1/2 scale model of wood house with tiled roof was performed. Scaled model was constructed through rigorous verification process to have quantitative relationship between the intensity of earthquake and damage state. The completed model was mounted on a shaking table and subjected to the dynamic tests. Two kinds of tests were performed: exploratory test and fragility test. The exploratory test was done with low intensity shaking. In the fragility test, the behavior of the model was carefully monitored while increasing the shaking intensity. The construction details of the model are provided and test procedures are reported. Finally important test results are presented and their implications are discussed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.368-373
• /
• 2003

To improve the reliability of seismic hazard assessment of historic earthquake, shaking table test of a full scale model of wood house with tiled roof was performed. Full scale model was constructed through rigorous verification process to have quantitative relationship between the intensity of earthquake and damage state. The completed model was mounted on a shaking table and subjected to the dynamic tests. Two kinds of tests were performed: exploratory test and fragility test. The exploratory test was done with low intensity shaking. In the fragility test, the behavior of the model was carefully monitored while increasing the shaking intensity. The construction details of the model are provided and test procedures are reported. Finally important test results are presented and their implications are discussed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.247-252
• /
• 2003

To improve the reliability of seismic hazard assessment of historic earthquake, shaking table test of a 1/2 scale model of wood house with thatched roof was peformed. Scaled model was constructed through rigorous verification process to have quantitative relationship between the intensity of earthquake and damage state. The completed model was mounted on a shaking table and subjected to the dynamic tests. Two kinds of tests were performed: exploratory test and fragility test. The exploratory test was done with low intensity shaking. In the fragility test, the behavior of the model was carefully monitored while increasing the shaking intensity. The construction details of the model are provided and test procedures are reported. Finally important test results are presented and their implications are discussed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.104-110
• /
• 2010

In this study, a series of two-dimensional model test and numerical analysis was carried out to investigate the pile movement due to tunnelling in soft ground. The model test consists of 21 cases according to locations of the pile tip over the centre position of model tunnel. To identify both the pile and ground movements a close-range photogrammetric technique was adopted in the model test. The results from the model test were compared to the two-dimensional finite element analysis using the CRISP program. It was found that the rotation point on the pile was significantly affected by factors such as the offset distance from the model tunnel and the volume loss that occurred during the tunnelling operation.

• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.389-398
• /
• 2020

Test cases in the existing weapon system software were created manually by the tester analyzing the test items defined in the software integration test procedure. However, existing test case generation method has two limitations. First, the quality of test cases can vary depending on the tester's ability to analyze the test items. Second, excessive time and cost may be incurred in writing test cases. This paper proposes a method to automatically generate test cases based on the requirements model and specifications to overcome the limitations of the existing weapon system software test case generation. Generate test sequences and test data based on the use case event model, a model representing the requirements of the weapon system software, and the use case specification specifying the requirements. The proposed method was applied to 8 target models constituting the avionics control system, producing 30 test sequences and 8 test data.

• Journal of Information Processing Systems
• /
• 제14권3호
• /
• pp.607-620
• /
• 2018

The problem surrounding methods of implementing the software testing process has come under the spotlight in recent times. However, as compliance with the software testing process does not necessarily bring with it immediate economic benefits, IT companies need to pursue more aggressive efforts to improve the process, and the software industry needs to makes every effort to improve the software testing process by evaluating the Test Maturity Model integration (TMMi). Furthermore, as the software test process is only at the initial level, high-quality software cannot be guaranteed. This paper applies TMMi model to Automobile control software testing process, including test policy and strategy, test planning, test monitoring and control, test design and execution, and test environment goal. The results suggest improvement of the automobile control software testing process based on Test maturity model. As a result, this study suggest IT organization's test process improve method.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.98-104
• /
• 2005

The mathematical models of hydrodynamic force and moment acting on a ship at low speed range should be established differently from the ones at nominal cruising speed range since a ship moves with large drift angle or rotates in a stationary position. We modified widely used Yoshimura's cross flow model in order to apply the system identification method to estimate parameters in the model. The apparatus and the procedure of free running model test were suggested so that the parameters in the model be estimated. The validity of our proposing modified model and test procedure was confirmed by comparison with the results of simulated model test.

• Communications for Statistical Applications and Methods
• /
• 제12권2호
• /
• pp.359-364
• /
• 2005

This paper considers a specification test of conditional Poisson regression model for time series count data. Although conditional models for count data have received attention and proposed in several ways, few studies focused on checking its adequacy. Motivated by the test of martingale difference assumption, a specification test via Ljung-Box statistic is proposed in the conditional model of the time series count data. In order to illustrate the performance of Ljung- Box test, simulation results will be provided.