• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.202-210
• /
• 2017

Shear stress is one of the most important mechanical factors used in various fields and is important for the design of artificial channels. Current shear stresses have been used in the past, but there are factors that are difficult to actually measure or calculate, such as bed shear stress and energy slope in the equation used. In particular, the energy slope is a very difficult factor to estimate, and it is difficult to estimate the slope and flow velocity of the boundary layer although the energy slope can be used to obtain the shear stress distribution. In addition, the bed shear stress among the shear stress distribution is very difficult to measure directly, and the research is somewhat slower than the velocity. In this study, we have studied the simple calculation of the average flow velocity and the shear stress distribution using entropy M without reflecting the energy gradient, and we used existing laboratory data to demonstrate the utility of the applied equation. The stress distribution in the graphs was comparatively analyzed. In the case of the uniform flow and the non-uniform flow, the correlation coefficient was almost identical to 0.930-0.998.

• Informatization Policy
• /
• v.18 no.4
• /
• pp.42-58
• /
• 2011

This paper starts from one question: what are the key factors of the web accessibility policy, which is significant for realizing equity in the web and enhancing human dignity in the information society. To find significant factors for complying with web accessibility, this paper analyzes panel data of 16 Korean local governments (for five years: 2004-2009) according to the research design which is based on the demand and supply balance model and consists of four variables : 'legal and institutional environment (including legal infrastructure)', 'financial foundation (fiscal self-reliance ratio)', 'policy inputs (amount of imformatization budget, employee of information experts)'and 'policy demand (internet usage rate, the number of disabled people and elderly people)'. From the results of this study, this paper can explain the mechanism and impact factors on the web accessibility policy of Korean local governments. Some factors are critical to improve web accessibility: (1) the importance of policy demand, (2) the importance of policy inputs, (3) the importance of legal and institutional environment. Finally, this paper concludes with some suggestions to enhance the web accessibility capacity for Korean local governments: (1) improve awareness on web accessibility, (2) develop a standard and invest R&D on web accessibility, (3) foster experts in web accessibility.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.35-43
• /
• 1995

For several years lots of attempts have been made to establish the liquid membrane-based techniques for separations of gas mixtures especially containing carbon dioxide. A more effective system to separate $CO_{2}$ from flue gases, a circulatory hollow-fiber membrane absorber(HFMA) consisting of absorption and desorption modules with vacuum mode, has been considered in this study. Gas-liquid mass transfer has been modeled on a membrane module with non-wetted hollow-fibers in the laminar flow regime. The influence of an absorbent flow rate on the separation performance of the circulatory HFMA can be predicted quantitatively by obtaining the $CO_{2}$ concentration profile in a tube side. The system of $CO_{2}/N_{2}$ binary gas mixture has been studied using pure water as an(inert) absorbent. As the absorbent flow rate is increased, the permeation flux(i.e., defined as permeation rate/membrane contact area) also increases. The enhanced selectivity compared to the previous results, on the other hand, shows the decreasing behavior. It has been found obviously that the permeation flux depends on the variations of pressure in gas phase of desorption module. From an accurate comparison with the results of conventional flat sheet membrane module, the advantageous permeability of this circulatory HFMA can be clearly ascertained as expected. Our efforts to the theoretical model will provide the basic analysis on the circulatory HFMA technique for a better design and process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.1023-1031
• /
• 2014

This study is conducted to evaluate the supply effectiveness of the Long-term Secured Public Rental Housing (LSPRH) program implemented by the City of Seoul since March, 2012. To estimate the residential intention of potential applicants for the housing program, two logistic regression models of residential intention are estimated based on the residential characteristics of real residents. The purpose of this model estimation is to find out factors influencing the supply of LSPRH and thus to suggest the ideas for improving the effectiveness of the rental housing program operation. The analysis result shows that financial condition, income level, and public support are the major determinants for selecting LSPRH. It is also revealed that those who are currently living in rental housing or living in a house more expensive than those in nearby areas have higher residential intention for the LSPRH program. The result also presents that some problems associated with the traditional rental housing programs - such as visually recognizable low-quality exterior building design or the concentration of rental housing on limited spots - could be solved by this new type of public housing program. Lastly, one interesting finding different from previous research is that people with the intention to move into either traditional rental housing or LSPRH do not necessarily prefer a more spacious house than their current rental house.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.73-82
• /
• 2015

Purpose - This paper aims to investigate whether information asymmetry could explain capital structures in Korean corporations. According to Myers (1984), firms prefer internal funding to external financing due to the costs associated with information asymmetry. When external financing is necessary, firms prefer to issue debt rather than equity by the same reasoning. Since Shyam-Sunder and Myers (1999), numerous studies continue to debate the validity of the theory. In this paper, we show how the theory depends on assumptions and incorporated variables. We hope our investigation can provide helpful implications regarding capital structure, information asymmetry, and other firm characteristics. Specifically, our empirical results are complementary to the analysis of Son and Lee's (2015), a recent study that examines the pecking order theory prediction for Korean retail firms. Research design, data, and methodology - We test empirical models that are some variants of model used in Shyam-Sunder and Myers (1999). The financial and accounting data are provided by WISEfn for the firms listed on the KOSPI during 1990 to 2013. Bond ratings are supplied by the Korea Investor Service (KIS). We take into account the heterogeneity in debt capacity; a firm's debt capacity is measured by using the method of Lemmon and Zender (2010) based on its bond ratings. Finally, we estimate empirical models suggested by Shyam-Sunder and Myers (1999), Frank and Goyal (2003), and Lemmon and Zender (2010). Results - First, we find that Shyam-Sunder and Myers' (1999) prediction fails to explain total debt changes of Korean firms. Second, we find a non-monotonic relationship between total debt changes and financial deficits with respect to debt capacity. This contradicts the prediction of Lemmon and Zender (2010) that argues the pecking order theory survives with a monotonically increasing relationship. Third, we estimate a negative correlation coefficient between financial deficit and current debt changes. The result is the complete opposite of the prediction of Lemmon and Zender (2010). Finally, we also confirm the non-monotonic relationship between non-current debt changes and financial deficits with respect to debt capacity. Yet, the slope of coefficient is smaller than that of total debt change case. Indeed, the results are, to some extent, consistent with the prediction of pecking order theory, if we exclude the mid-debt capacity firms. Conclusions - Our empirical results complementary to the analysis of Son and Lee (2015), a recent study focusing on capital structure in Korean retail firms; their paper suggests interesting topics regarding capital structure, information asymmetry, and other firm characteristics in Korean corporations. Contrary to Son and Lee (2015), our results show that total debt changes and current debt changes are inconsistent with the prediction of Shyam-Sunder and Myers (1999). However, similar to Son and Lee (2015), non-current debt changes are consistent with the pecking order prediction, in the case of excluding the mid-level debt capacity firms. This contrast allows us to infer that industry characteristics significantly affect the validity of the pecking order prediction. Further studies are needed to analyze the economics behind this phenomenon, which is beyond the scope of our paper. In addition, the estimation bias potentially matters regarding the firm-level debt capacity calculation. We also reserve this topic for future research.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.109-114
• /
• 2015

Purpose - The movie market has the characteristics of being a perfectly competitive market as well as a pure monopolistic market at the same time. This is because there are competitors in the industry but prices, although not fixed, have not changed a lot. Price competition may not have spread, but the competition is focused on artistic value, and the degree of box office success is most important. The artistic value is determined in the course of the production process. However, the degree of box office success is dependent upon the marketing manager. The marketing strategy represents the difference in the standard or quality of the movie. Inherently, the marketing manager adopts the entertainment strategy based on the quality of the foundation of the completed movie. At this time, the marketing manager knows the pertinent information (high quality/low quality) regarding the movie. This research study tries to reveal what should be the reasonable movie marketing expense, dependent on the quality of the movie. Research design, data, and methodology - Using a game scenario with different market players, the goal of the research analysis is to find out the following. First, the marketing expense is determined to maximize the profits after film production. Second, after the production costs are already committed, the manufacturer gets to choose the marketing level. At this time, there will be a profit maximization point, considering the competition. The premise of the research is as follows: if it is a good movie of quality, positive word of mouth increasing the audience continuously slows down the speed of the demand curve. If the movie quality is bad, the negative word of mouth decreasing the audience gradually hastens the speed of the demand curve. On the marketing side, when the manufacturer invests heavily in the marketing expense of the movie, consumer expectations increase to drive up the audience numbers. On the other hand, it is difficult to improve the profits excessively. When the manufacturer invests in marketing a little bit, the marketing expense is only relatively committed, therefore a lot of demand cannot be gained. Results - If a fixed market share is in a competitive situation, a low quality manufacturer expends relatively more marketing expense. If the situation assumes two manufacturers spend the same for the cost of production, the high quality manufacturer takes more profit. If the manufacturer expends less marketing budget to save costs, the optimum profit cannot be achieved since the other party (opponent) grabs the initial market share. Conclusions - In conclusion, investment is essential for market share to increase. We must refrain from a zero-sum game and have models where the game participants pursue the creative profits together. In the current film industry, there is the dominating logic of winner and loser but we have to create a film industry environment where the participants can be altogether satisfied and live together.

• Journal of Distribution Science
• /
• v.13 no.5
• /
• pp.103-111
• /
• 2015

Purpose - When it comes to first impressions of family restaurants, people basically think of the following factors: cozy, a refreshing space, indoor lighting, atmospheric music, the best-quality service through mutual interactions with employees, birthday events, follow-up customer management, brand image, and many others. Focusing on such family restaurants characteristics, with consumption experience and customer satisfaction determined as mediator variables, this study looks into the selection factors that affect customer loyalty when choosing a family restaurant. Subsequently, the study conducts an empirical analysis of these selection factors with the greatest influence. Research design, data, and methodology - This study analyzed 200 total surveys of family restaurant customers including college students, workers, housewives, and others. The survey was conducted over two weeks in May 2014. For statistical processing, SPSS 21 was used for factor analysis and reliability analysis as well as AMOS for structural equation analysis. In terms of a variable that would influence either consumption experience or customer satisfaction at the restaurants, the study introduced the concept of customer equity. The study designed a model based on a hypothesis developed using the following factors: customer encounter service value, customer convenience value, brand equity, relationship equity, and other factors defined as components of customer equity by Rust et al. (2000) determined as independent variables as well as with customer experience and customer satisfaction set as mediator variables. The hypothesis, after all, assumed that customer loyalty would be positively (+) influenced. Results - The analysis results from the study reported that brand value, customer encounter service value, and relationship value have positive (+) effects on consumption experience and customer satisfaction. However, as for customer convenience value, this turned out not to have a statistically significant influence on consumption experience and customer satisfaction. In regard to a relation between consumption experience and customer satisfaction, the results showed that the former affects the latter, and in terms of intervening variables, both of these appeared to have a positive (+) effect on customer loyalty. Conclusions - This study suggests that family restaurants should look for strategies that focus on how to promote customer relationships. For example, restaurants could try birthday events or discount events to achieve this goal. Since the study ended up realizing relatively low levels of suitability and statistical significance, the path of the study changed. After all, in order to increase suitability and statistical significance, the study had to eliminate factors such as service quality and others and for this reason the study was unable to conduct the analysis as initially planned. In addition, the data samples of the research were mainly gathered from students, which made it hard to say that the analysis was carried out on samples from every different group. Future research should analyze the characteristics of each group of customers for factors affecting customer satisfaction and customer loyalty in the family restaurant chain.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.8
• /
• pp.41-50
• /
• 2018

Purpose - As an important participant in the financial markets, the commercial bank will be impacted by the interest rate marketization. Owing to the special condition of China, this paper tries to explore the impact of operating mechanisms between interest rate marketization and the profitability of the commercial Bank. Research design, data and methodology - This paper applies time series data from 2005 to 2016. Due to the short period of time series, autocorrelation often occurs. Therefore, the fully modified least squares(FMOLS) will be used to conduct an empirical analysis. The reason is that it can move off the autocorrelation between variables and disturbance term. And FMOLS also can make estimated cointegrating parameters closed to normal distribution. More importantly, in order to avoid spurious regressions, the Augmented Dickey-Fuller Test will be used to verify the stationarity of all variables. The total return of asset is treated as the profitability of commercial bank. The net interest spread is treated as a measurement of interest rate marketization. Both are regarded as dependent variables. The non-interest income or gross revenues and impaired loans or gross loans are treated as independent variables. The sixteen representative listed commercial banks are divided into three categories (state-owned, share-holding and city-owned) to conduct an estimation. Results - Via empirical analysis, the findings show that the net interest spread has a positive effect on the profitability of the commercial bank. More specifically, 1% increase in the net interest spread will lead 0.157% increase in the profitability of state-owned commercial bank, 0.269% increase in the profitability of share-holding commercial bank and 0.263% increase in the profitability of city-owned commercial bank. If regarding the sixteen listed commercial city as a whole, 1% increase in the net interest spread will lead 0.267% increase in the profitability of the commercial bank. Conclusions - As the interest rate marketization, the importance of interest rate on the profitability of commercial bank has become more and more significant. The empirical evidences also prove that the net interest spread can bring about the change of the commercial bank's profitability. Therefore, policy-makers of commercial banks should fully understand the operating mechanism between them.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.114-120
• /
• 2011

The characteristics of a helical turbine to be used for tidal stream energy conversion have been numerically studied with varying a few design parameters. The helical turbines were proposed aiming at mitgating the well known poor cut-in characteristics and the structural vibration caused by the fluctuating torque, and the basic concept is introducing some twisting angle of the vertical blade along the rotation axis of the turbine. Among many potential controling parameters, we focused, in this paper, on the twisting angle and the height to diameter ratio of the turbine, and, based on the numerical experiment, We tried to propose a configuration of such turbine for which better performance can be expected. The three-dimensional unsteady RANS equations were solved by using the commercial CFD software, FLUENT with k-${\omega}$ SST turbulence model, and the grid was generated by GAMBIT. It is shown that there are a range of the twisting angle producing better efficiency with less vibration and the minimum height to diameter ratio above which the efficiency does not improve considerably.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2019

To analyze the influence on the stability, resulting from application of upgrade pipe roof structure (UPRS) method to the structure existed under subway Station, physical properties of a ground, elasticity and elasto-plastic theories, including displacement analysis of finite elements, stress analysis of finite elements, displacement caused by steel pipe propulsion and internal excavation, and stress change in a steel pipe, were introduced. Then, the influence on structural stability when applying the UPRS method was compared and reviewed based on the construction management standard of the Ministry Land, Infrastructure and Transport and foreign sources, using numerical analysis with a model which assumes that each microelement divided into a structurally stable point consists of the connection of finite points. As a result of the finite element analysis, 7.21 mm maximum displacement, 1/3,950 angular displacement, 70.28 MPa bending compressive stress of steel pipe structure constructed with UPRS (non-excavation) method and 477.38 MPa maximum shear strength were within their allowable standards (25.00 mm, 1/500, 210.00 MPa and 120.00 MPa, respectively), and therefore, the results showed that the design and construction are stable.