• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 후기공동학술대회 논문집
• /
• pp.59-59
• /
• 2011

H-mode or X-mode predominates in marine engines according to the number of cylinder. Generally, H-mode noticeably happen in the engine below 7-cylinder and X-mode remarkably happen above 8-cylinder in the engine operating range. Until now, FEA (Finite Element Analysis) of 3D engine model has been mainly used to estimate the engine vibration but it is very time consuming for simulation and difficult to model simplification. Furthermore, the accuracy of simulation shows a marked difference according to modeling method. Therefore it is very difficult to have contentable result from FEA for beginners and laymen. In this paper, the estimation method based on a test has been suggested to solve the difficulty.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.269-274
• /
• 1998

This paper describes a scaled model for PWM thyristor current-source inverter with a commutation circuit. The system consists of a 6-pulse thyristor bridge and an LC resonant circuit with thyristor switches, which offers thyristors to have turn-off capability for PWM operation with minimal switching losses. The proposed system can be used as a reactive power compensator with PWM operation for the utilitity application. There would be two advantages in the proposed system over the existing voltage source inverter. One is the low system cost due to using the conventional thyristors. Another is easy expansion of system operation voltage because th series operation of thyristor devices is already proven in HVDC system.

• 한국연소학회지
• /
• 제21권1호
• /
• pp.18-30
• /
• 2016

Pyro-process of solids is the way to heat solid materials under high temperature. In this processing, energy efficient use is one of the main concerns due to its high energy consumption of bulk materials. To calculate the energy use of processes, heat & mass balance in simplified 0-dimensional model was performed. Energy calculation by this simplified model can lead to confusion due to simplification. Thus, it is necessary to understand considerations of energy analysis. In this study, cement manufacturing as a very common example of pyro-processing of solids, was introduced for explaining considerations of energy analysis for energy efficient use.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.931-936
• /
• 2008

The need for urban-scale energy simulation is increasing as the world is aware of urgency to decrease $CO_2$ emission. As a bridge of building energy simulation and that of urban, this paper presents a case study to examine the effect of changing resolution of a model in case of complex apartment unit. Also it suggests a modeling strategy to correct differences caused by simplification of the model and evaluate the extent of its use.

• Korean Journal of Geomatics
• /
• 제4권1호
• /
• pp.9-16
• /
• 2004

An object-oriented design was carried out for the digital photogrammetric processes. Classes were identified and implemented to develop an integrated digital photogrammetry system using a 3 dimensional self-calibration model for CCD cameras. This integrated system is deemed to be a significant progress from the conventional photogrammetric system which is a series of discrete processes. Object oriented methodology was selected for the implementation of the integrated photogrammetric system because it would be a very complex task to get the same result using a procedural programming language. Besides the simplification of development effort, object oriented methodology has further benefits of better management of program in case when updates to parts of the program are necessary. Using the classes designed in this study, a 3 dimensional self-calibration model was developed for a CCD camera. Classes for data input and image handling as well as classes for bundle adjustment were implemented. The bundle adjustment system was further enhanced with member functions to handle additional parameters for principal point coordinates and focal length, thereby, enabling the application to non-metric CCD cameras.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1341-1347
• /
• 2023

This study proposes to ensure the seismic stability of an existing switchboard for emergency diesel generator by applying mode analysis, static analysis and dynamic analysis. First, a three dimensional model for the swithboard was made with simplification for mode analysis. Next, The mode analysis for the finite element model of the existing switchboard was performed. The 1st natural frequency below 33 Hz, the seismic safety cutoff frequency, was calculated to be 21.943 Hz. Finally, based on the seismic stability theory, the von-Mises equivalent stresses derived by structural analysis and response spectrum analysis under the normal and faulted conditions were 74.179 MPa and 49.769 MPa, respectively. These are less than specified allowable stresses. So seismic stability was confirmed.

• Coupled systems mechanics
• /
• 제13권3호
• /
• pp.231-245
• /
• 2024

In the present work, a microelogated thermoelastic model based on Lord-Shulman (1967) and Green-Lindsay (1972) theories of thermoelasticity has been constructed. The governing equations for the simulated model are converted into two-dimensional case and made dimensionless for further simplification. Laplace and Hankel transforms followed by eigen value approach has been employed to solve the problem. The use of eigen value approach hasthe advantage of finding the solution of governing equationsin matrix form notations. This approach is straight forward and convenient for numerical computation and avoids the complicate nature of the problem. The components of displacement,stress and temperature distribution are obtained in the transformed domain. Numerical inversion techniques have been used to invert the resulting quantities in the physical domain. Graphical representation of the resulting quantities for describing the effect of microelongation are presented. A special case is also deduced from the present investigation. The problem find application in many engineering problems like thick-walled pressure vesselsuch as a nuclear containment vessel, a cylindricalroller etc.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.443-449
• /
• 2014

가스터빈 희박 예혼합 연소기에서 발생하는 연소 불안정 현상을 예측하기 위하여 열음향 해석 기법이 폭넓게 사용되고 있다. 그러나 이러한 모델들은 전체 연소기 시스템과 화염의 형상을 과도하게 단순화함으로써, 모델 정확도에 한계를 드러내왔다. 본 연구에서는 두 가지 측면에서 열음향 모델의 정확도를 개선하고자 하는 노력을 시도하였다. 우선 화염의 위치를 연소기 입구가 아닌 실제 계측 결과를 반영할 수 있도록 열음향 모델을 수정하였으며, 두 번째로는 열 발생 위치가 얇은 화염의 형태가 아닌, 실제 화염의 형상과 같이 열 분포 현상을 반영할 수 있도록 하였다. 모델 수정 결과 기존의 열음향 모델 대비, 불안정 현상의 성장률을 예측하는데 있어서 오차가 줄어드는 것으로 나타났다.

• 디지털융복합연구
• /
• 제4권2호
• /
• pp.109-126
• /
• 2006

The United States Intel company and these enterprises which Andy Grove President talks exception are without coming out at the Internet enterprise and the hereafter 5 year back side separately it means the necessity which will write the word which is a Internet enterprise will lose. When that time about, it puts upper volume from the Internet territory which is will open the competition where the relation enterprises are keen the winner will be undertaken the existing enterprises and the place where it receives the footlights where the e-business is many in this recent times which it talks, the reason the whole world becomes connection with the Internet, the frame of the social whole changes and the arrival result completeness sincerity pursuit of information comes to be possible simultaneously, it is changing as the product army which is complicatedly diversified from the product army where the craving of the customer becomes simplification. The consequently quick doctor decision and efficient manufacturing environment construction are demanded and Product Life cycle becomes shortening, the e-Business from the digital management environment which changes suddenly the necessity is plentifully raising its head with plan of competitive power security of the enterprise and management renovation. Successful of the e-business model and failure instances there is a depth from the research which it sees and after trying to investigate, it originated to the advancement of digital environment the strategies and to sleep against the successful model of the e-business for a new management renovation presentation it tries it does.

• 방송공학회논문지
• /
• 제9권1호
• /
• pp.64-73
• /
• 2004

본 논문에서는 3차원 메쉬 모델에 적용되는 강인한 워터마킹 알고리듬을 제안한다. 제안하는 알고리듬에서 워터마크는 3차원 모델로부터 추출된 2차원 영상에 삽입된다. 이 2차원 영상의 화소 값은 정해진 기준점들로부터 3차원 모델의 표면까지의 거리이며, 이를 거리 영상이라 한다. 워터마크는 거리 영상에 삽입되며, 워터마크된 거리 영상을 이용하여 3차원 모델의 꼭지점 좌표를 변경하면 워터마크가 삽입된 3차원 모델을 얻는다. 워터마크의 추출은 워터마크가 삽입된 모델로부터 거리영상을 얻고, 이 영상에서 워터마크를 추출한다. 워터마크 추출에는 원본 모델이 필요하며 원본과의 정합이 필요하다. 실험을 통해 제안하는 알고리듬이 회전, 병진, 비례조절, 가우스 잡음, 메쉬 간략화, 꼭지점 양자화에 강인함을 확인하였다.