• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.101-107
• /
• 2008

We introduce an optimization of fuzzy set-fuzzy systems based on IG (Information Granules). The proposed fuzzy model implements system structure and parameter identification by means of IG and GAs. The concept of information granulation was coped with to enhance the abilities of structural optimization of the fuzzy model. Granulation of information realized with C-Means clustering helps determine the initial parameters of the fuzzy model such as the initial apexes of the membership functions in the premise part and the initial values of polynomial functions in the consequence part of the fuzzy rules. The initial parameters are adjusted effectively with the help of the GAs and the standard least square method. To optimally identify the structure and the parameters of the fuzzy model we exploit GAs with successive tuning method to simultaneously search the structure and the parameters within one individual. We also consider the variant generation-based evolution to adjust the rate of identification of the structure and the parameters in successive tuning method. The proposed model is evaluated with the performance of the conventional fuzzy model.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.18-22
• /
• 2012

This paper presents a method and the experimental measurement system for the determination of Jiles-Atherton model parameters of the 30ZH120 electrical steel sheet. The paper utilizes Epstein Square devices to proceed with the experiment and measurement on a group of hysteresis loops of some certain transformers which use the 30ZH120 electrical steel sheet under two different lap ways. The approach relies on the simulated annealing optimization method in order to minimize the error between the measured and modeled hysteresis curves and yield the best five Jiles-Atherton model parameters. A convenient program, based on the Simulink platform, that can identify the J-A model parameters automatically from the experimental saturated hysteresis loop which is used to model the nonlinear characteristics of the electrical steel sheet, is developed. Research shows that the simulated annealing optimization method gets satisfactory results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.357-360
• /
• 2000

This paper describes a parameter extraction method for HBT(Heterojunction Bipolar Transistor) equivalent circuit model without measurements of special test structures or numerical optimizations. Instead, all equivalent circuit parameters are calculated analytically from small-signal S-parameters measured under different bias conditions. These values being extracted from the cutoff mode can be used to extract intrinsic parameters at the active mode. This method yields a deviation of about 1.3 % between the measured and modeled S-parameters.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.924-929
• /
• 1994

In using a performance model of a torque converter determined by its gemetric condition, it is possible that the analysis of two arbitrary converters produces the the same results because of the same value of equivalent parameters despite their different shapes. Therefore, it is necessary to understand the effect of shape factor on dynamic perfomance, and equivalent parameters reoresenting a performace model of a converter should into its defined by the behavior of flow field. In this study, torus flow of a torque converter is changed into its equivalent system defined by the behavior of flow, and govering equations for the system are presented and used for analysis. Equivalent parameters are obtained from the results of flow analysis and are compared with parameters of one dimensional performance model. The influence that shape change of a converter has on the behavior of flow and the equivalent parameters is studied qualitatively.

• Structural Engineering and Mechanics
• /
• 제28권6호
• /
• pp.635-658
• /
• 2008

An application is presented of a modified Vlasov model to the free vibration analysis of plates resting on elastic foundations. The effects of the subsoil depth, the ratio of the plate dimensions, the ratio of the subsoil depth to the plate dimension in the longer direction, and the value of the vertical deformation parameter within the subsoil on the frequency parameters of plates on an elastic foundation are investigated. This analysis has been caried out by the aid of a computer program. The first ten frequency parameters are presented in tabular and the graphical forms to evaluate the effects of the parameters considered in this study. Then mode shapes corresponding to the first six of the frequency parameters are given in graphs. It is concluded that the effect of the subsoil depth on the frequency parameters of the plates on an elastic foundation is generally larger than those of the other parameters considered in this study.

• Korean Journal of Hydrosciences
• /
• 제6권
• /
• pp.81-98
• /
• 1995

A linear reservoir rainfall-runoff system was developed as a rainfall-runoff event simulation model. It was achieved from large modification of runoff function method. There are six parameters in the model. Hydrologic losses consist of some quantity of initial loss and some ratio of rainfall intensity followed by initial loss. The model has analytical routing equations. Hooke and Jaeves algorithm was used for model calibration. Parameters were estimated for flood events from '84 to '89 at Seomyeon and Munmak stream gauges, and the trends of major parameters were analyzed. Using the trends, verifications were performed for the flood event in September 1990. Because antecedent rainfalls affect initial loss, future researches are required on such effects. The estimation method of major parameters should also be studied for real-time forecasting.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.331-337
• /
• 2001

The purpose of this study is to analyze the principal causes of vibration problem and find out the method of vibration reduction in a chip-mount system. The principal causes are investigated through measurements of vibration spectrum and model parameters. Modal parameters are obtained by using an experimental model test. Based on the model parameters from experiments. a model of finite element method is formulated. The model presents effective redesign of increasing the natural frequencies in order to reduce the vibration of a chip-mount system. Further, through computer simulation for the behavior of head to be main vibration source, the best acceleration pattern of head movement can be verified to achieve effective head-positioning and reduce the vibration due to head movement.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.249-252
• /
• 2002

This model is the daily streamflow model of the Korean watersheds has been developed to simulate the daily streamflow with the data of daily rainfall and pan evaporation. Parameters of this model are the water balance parameters composed Umax, Lmax, FC, CP, and CE and the routing parameters composed $U_i,\;k_1\;and\;k_2$. Among these parameters, CE value is applied one fixed value during the year and coefficient of initial ion K is empirically determined by 0.2. The object of this research is to improve the DAWAST model by application of the monthly value of CE for evapotranspiration and the revised K value for the initial abstraction.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1031-1041
• /
• 2016

This paper presents millimeter-wave (mmWave) propagation characteristics and channel model parameters including path loss, delay, and angular properties based on 28 GHz and 38 GHz field measurement data. We conducted measurement campaigns in both outdoor and indoor at the best potential hotspots. In particular, the model parameters are compared to sub-6 GHz parameters, and system design issues are considered for mmWave 5G Giga communications. For path loss modeling, we derived parameters for both the close-in free space model and the alpha-beta-gamma model. For multipath models, we extracted delay and angular dispersion characteristics including clustering results.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1234-1237
• /
• 1993

This paper discusses the hull form generation from fuzzy model constructed with actual ship data using fuzzy concept. SAC, which is the most important factor in the hull form generation, is expressed by a fuzzy model describing the relationships among design parameters, which have a great influence on SAC, through model identification process with the actual ship data and design parameters. Then, we can infer the SAC of an aimed ship through the process of fuzzy inference and decide the offset of a front view by making the fuzzy model between SAC and offset as well. In conclusion, this paper makes a step forward from the geometrical definition, which has been used for hull form generation so far, to direct mathematical formulae about the relationship between design parameters and offset. So, if the design parameters are given, we can generate the hull form taking such properties into account.