• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.1
• /
• pp.11-21
• /
• 2008

Recently, it has shown an increased interest in 3D stereoscopic contents due to the development of the digital image media. Therefore, many techniques in 3D stereoscopic image generation have being researched and developed. However, it is difficult to generate high immersion and natural 3D stereoscopic contents, because the lack of 3D geometric information imposes restrictions in 2D image. In addition, control of the camera interval and rendering of the both eyes must be repetitively accomplished for the stereo effect being high. Therefore, we propose integrated editing system for 3D stereoscopic contents production using a variety of images. Then we generate 3D model from projective geometric information in single 2D image using image-based modeling method. And we offer real-time interactive 3D stereoscopic preview function for determining high immersion 3D stereo view. And then we generate intuitively 3D stereoscopic contents of high-quality through a stereoscopic LCD monitor and a polarizing filter glasses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2545-2552
• /
• 2014

This study is aiming to suggest the effective thermal management system design technologies for the high voltage and capacity battery system of the electricity driven vehicles and introduce the theoretical designing methods. In order to investigate the effective operation of the battery system for the electricity driven vehicles, the heat generation model for Li-ion battery system using the chemical reaction while charging and discharging was suggested and the thermal loads of the heat sources (air or liquid) for cooling and heating were calculated using energy balance. Especially, the design methods for the cooling and heating of the battery system for maintaining the optimum operation temperature were investigated under heating, cooling and generated heat (during charging and discharging) conditions. The battery thermal management system for the effective battery operation of the electricity driven vehicles was suggested reasonably depending on the variation of the season and operation conditions. In addition, at the same conditions under summer season, the cooling method using the liquid and active cooling technique showed a relatively high capacity, while cooling method using the passive cooling technique showed a relatively low capacity.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.9
• /
• pp.904-917
• /
• 2010

Much research on ontology has been done during the last decade in order to represent knowledge and connect data semantically in AI and Semantic Web areas. However, ontologies might be represented and defined in different ways depending on knowledge and intention of users. It causes heterogeneity problem that the same concept can be differently expressed. This paper introduces a XOB (XMDR-based Ontology Builder) system based on XMDR to resolve the problem. XOB creates ontologies by reusing classes and relations defined in XMDR. XOB therefore is able to either solve or minimize the heterogeneity problem among ontologies. This paper introduces the conceptual model and overall architecture of the proposed system XOB. This paper defines the process, algorithm, ontology generation rule that is required to create ontologies by using concepts registered in XMDR. Our proposal supports higher standardization than the previous approaches, and it provides many advantages such as consistent concept usage, easy semantic exchange, and so on. Therefore, XOB enables high-quality ontology creation and reduces cost for ontology integration and system development.

• Nutrition Research and Practice
• /
• v.7 no.4
• /
• pp.249-255
• /
• 2013

In this study, the protective effects of EGCG on L-3,4-dihydroxyphenylalanine (L-DOPA)-induced oxidative cell death in catecholaminergic PC12 cells, the in vitro model of Parkinson's disease, were investigated. Treatment with L-DOPA at concentrations higher than $150{\mu}M$ caused cytotoxicity in PC12 cells, as determined using the 3-(4,5-dimetylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and flow cytometry detection. The apoptotic ratio was similar in cells treated with $100{\mu}M$ EGCG plus $150{\mu}M$ L-DOPA (5.02%) and the control (0.96%) (P > 0.05), and was lower than that of cells treated with L-DOPA only (32.24%, P < 0.05). The generation level of ROS (% of control) in cells treated with EGCG plus L-DOPA was lower than that in cells treated with L-DOPA only (123.90% vs 272.32%, P < 0.05). The optical density in production of TBARS in cells treated with L-DOPA only was higher than that in the control ($0.27{\pm}0.05$ vs $0.08{\pm}0.04$, P < 0.05), and in cells treated with EGCG only ($0.14{\pm}0.02$, P < 0.05), and EGCG plus L-DOPA ($0.13{\pm}0.02$, P < 0.05). The intracellular level of GSH in cells treated with EGCG plus L-DOPA was higher than that in cells treated with L-DOPA only ($233.25{\pm}16.44$ vs $119.23{\pm}10.25$, P < 0.05). These results suggest that EGCG protects against L-DOPA-induced oxidative apoptosis in PC12 cells, and might be a potent neuroprotective agent.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1263-1270
• /
• 2008

Recently, it is increasing the interest in previous web and web 2.0 which mean differentiation. The previous system is typical Static web based on client and server model, while web 2.0 mean next generation web which web change and evolve fundamentally. In this paper, I suggest that the module on RSS reader available under web 2.0 standards. A currently used RSS feed do correct the part distortion which ran be possible resolve the encoding problem of Hanguel and third-world language. The suggested module is implemented using Ajax. I developed the module for the use of effective contents on web 2.0 through the DragBox module based on the programming on mobility of Ajax and the design and implementation of automatic update module of RSS feed.

• Korean Journal of Remote Sensing
• /
• v.21 no.1
• /
• pp.73-81
• /
• 2005

We construct improved geocentric digital elevation model (DEM), estimate tidal dynamics and ice stream velocity over Sulzberger Ice Shelf, West Antarctica employing differential interferograms from 12 ERS tandem mission Synthetic Aperture Radar (SAR) images acquired in austral fall of 1996. Ice, Cloud, and land Elevation Satellite (ICESat) laser altimetry profiles acquired in the same season as the SAR scenes in 2004 are used as ground control points (GCPs) for Interferometric SAR (InSAR) DEM generation. 20 additional ICESat profiles acquired in 2003-2004 are then used to assess the accuracy of the DEM. The vertical accuracy of the OEM is estimated by comparing elevations with laser altimetry data from ICESat. The mean height difference between all ICESat data and DEM is -0.57m with a standard deviation of 5.88m. We demonstrate that ICESat elevations can be successfully used as GCPs to improve the accuracy of an InSAR derived DEM. In addition, the magnitude and the direction of tidal changes estimated from interferogram are compared with those predicted tidal differences from four ocean tide models. Tidal deformation measured in InSAR is -16.7cm and it agrees well within 3cm with predicted ones from tide models. Lastly, ice surface velocity is estimated by combining speckle matching technique and InSAR line-of-sight measurement. This study shows that the maximum speed and mean speed are 509 m/yr and 131 m/yr, respectively. Our results can be useful for the mass balance study in this area and sea level change.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.40-40
• /
• 2018

현실화된 기후변화로 인하여 강수패턴 및 강수량의 변화가 발생함에 따라 물 관리의 불확실성이 증가하고 있는 실정이며 또한 2014년부터 시작된 극심한 가뭄은 안정적인 용수공급에 많은 어려움을 주고 있다. 예로 보령댐의 경우 저수율이 2015년 19%, 2017년 8.3%로 역대 최저를 기록한 바 있고 2018년 3월 기준 운문댐과 밀양댐의 경우 저수율이 각각 11%(심각), 26.2%(경계)로 극심한 물부족에 시달리고 있다. 이러한 극심한 가뭄에 대응하기 위해서는 시설간 연계 운영, 급수체계 조정, 도수로 가동 등과 같은 구조적 대책과 더불어 저수용량에 따라 용수공급량을 감축하는 형태의 비구조적 대책의 일환인 용수공급 조정기준이 동시에 이루어져야 한다. 용수공급 조정기준은 국토교통부에서 주기적으로 발생하고 있는 가뭄에 대하여 대응하기 위해 만들어진 기준으로 다목적댐의 저수량을 기준으로 단계별(관심, 주의, 경계, 심각) 공급량을 감축하여 장기간 공급함으로써 국가재난을 사전에 예방하는 것을 목표로 하고 있다. 이러한 용수공급 조정기준을 수립하기 위해서는 최소 20년 이상의 과거 관측된 유입량 자료를 모의 발생하여 이수안전도 95%이상을 만족하는 단계별 용수공급 조정 기준선을 작성하게 된다. 하지만 신규 댐의 경우 관측된 유입량 자료가 전무함에 따라 용수공급 조정 기준을 수립하는데 어려움이 있다. 따라서 본 연구에서는 신뢰할 수 있는 유입량 자료를 생산하기 위해 첫 번째로 물리적 기반인 분포형 강우-유출 모형을 구축하고 검보정을 수행하였으며 이처럼 구축된 강우-유출모형을 이용하여 다수의 유입량 자료를 생산하였다. 두 번째로 SAMS 2007을 이용하여 유입량 자료를 모의 발생시켰으며 이를 저수지 운영에 활용하여 이수안전도 95%를 만족하는 용수공급 조정기준을 수립하였다. 본 연구의 결과는 극심한 가뭄에 대비하여 안정적인 용수공급 및 수자원 확보 등 이수적인 측면에서 크게 활용 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.525-525
• /
• 2015

국립기상과학원은 국가 물관리를 효율적으로 지원하기 위하여 TOPLATS(TOPmodel based Land-Atmosphere Transfer Scheme) 지면모델 기반을 활용한 전국 수문기상 분석 및 예측정보 생산체계를 구축하였다. TOPLATS 지면모델에서는 토양, 식생 등을 표현하기 위한 다양한 매개변수들이 사용되고 있으며, 그 중에서도 토양 속성과 관련 매개변수들은 토양수분, 증발산 등의 수문기상요소 생산에 큰 영향을 미치고 있어 현실적인 토양 특성에 대한 고려가 요구된다. 본 연구는 국립농업과학원의 토양도 정보를 이용하여 TOPLATS 지면모델에서 요구되는 토양 속성 및 관련 매개변수를 산정하고 이를 모델에 적용하고자 하였다. TOPLATS 모델에 사용되는 토양 매개변수는 총 22개 이며, 본 연구에서는 국립농업과학원에서 제공한 총 405개의 토양통에 대한 매개변수를 각각 산정하였다. TOPLATS 모델을 강제하기 위한 기상자료는 동네예보 분석자료, KLAPS(Korea Local Analysis and Prediction System) 분석자료, 입사 단 장파 복사량은 ASOS 관측자료를 기반으로 한 5km 해상도의 남한 격자자료이며, 2010~2013년 기간의 토양수분, 증발산량에 대한 검증 연구를 수행하였다. 본 연구의 결과는 기존의 11개 토양속성정보로 산출된 결과와 비교 분석하여 추후 제시할 예정이며, 본 연구에서 산출된 국내 토양 특성을 반영한 고해상도 수문기상정보는 향후 홍수 예측 및 가뭄 평가에 활용 할 수 있을 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• v.7 no.6
• /
• pp.589-599
• /
• 1999

This paper presents the development and applications of the software package JIFEX, a new finite element system which can be used for structural analysis and optimum design by the modern computer hardware and software technologies such as MS Windows95/NT and Pentium PC platforms. The complete system of JIFEX is programmed with $C/C^{++}$ language to make full use of advanced facilities of MS Windows95/NT. In the system, the finite element data pre-processing, based on the most popular CAD package AutoCAD (R13, R14), has been implemented, so that the finite element modeling could be integrated with geometric modeling of CAD. The system not only has interactive graphics facility for data post-processing, but also realizes the real-time computing visualization by means of the Dynamic Data Exchange (DDE) technique. Running on the Pentium computers, JIFEX can solve large-scale finite element analysis problems such as the ones with more than 60000 nodes in the finite element model.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.39-46
• /
• 2019

The competition for standardization in the enterprise environment starts with the data tier of the back-end and the standard enterprise middle tier is being stabilized by standardization as it is accepted as the Spring Framework. In addition, with the advent of new devices in an increasingly rapid cycle, securing compatibility with web and mobile services has become an important competitive advantage for web service companies. However, companies are unable to secure competent technical personnel appropriate for the rapidly changing environment of the information generation, and the curriculum of educational universities does not reflect the demand of new competency-oriented curriculum. Therefore, in this study, in order to acquire competency-oriented skills required for such an enterprise system platform environment and to develop a curriculum, the system using Spring Data JPA in the Spring Framework environment was implemented through documenting for each analysis and design step. It aims to provide a reference model for the full stack competency-based curriculum and capstone design curriculum that can be applied immediately in the enterprise environment.