• International Journal of Aeronautical and Space Sciences
• /
• v.2 no.1
• /
• pp.103-109
• /
• 2001

Productivity enhancement program of wind tunnel testing has begun at Korea Aerospace Research Institute Low Speed Wind Tunnel (KARI LSWT). A previous test record of a canard airplane model was adopted to examine the current status of wind tunnel testing efficiency. The time consumed to perform testing activities from the model preparation to data collection was broken down and the results were compared with those of the recent Boeing low speed test result. The efforts to improve the wind tunnel productivity consisted of the installation of mini crane underneath of test section, fabricating lift device for image fairings, model configuration changing rigs and the modifications of external balance system. Time reductions for changing strut interface platform and installation of image fairings. These effects showed more than 70% improvement over the previous test time. Integration of the new and modified systems will improve productivity of wind tunnel testing in KARI LSWT.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.1
• /
• pp.1-8
• /
• 2016

After 2017 years, BWMS units must be installed in the existing ship as well as the new ship by the ballast water management convention. Software tools that can help automatically searching for BWMS installation space to avoid pipes and equipment in the engine room of the existing ship will be very useful in the BWMS layout design. In this study, voxel representation of scanned data is generated first to search space efficiently. Simplified voxel models of each unit are prepared to be located in the engine room space as well. Distance between connected models is calculated through the arrangement direction and position of each model. Sums of distance between connected models are compared for the optimal configuration. It is assumed that the sum of distance between connected models depicts the pipe usage. The proposed method can save the time needed for BWMS installation design and allows optimal configuration of BWMS units.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.4
• /
• pp.458-464
• /
• 2008

The structural health monitoring has been gaining more importance in civil engineering areas such as earthquake and wind engineering. The use of health monitoring system can also provide tools for the validation of structural analytical model. However, only few structures such as historical buildings and some important long bridges have been instrumented with structural monitoring system due to high cost of installation, long and complicated installation of system wires. In this paper, the structural monitoring system based on cheap and wireless monitoring system is investigated. The use of advanced technology of micro-electro-mechanical system(MEMS) and wireless communication can reduce system cost and simplify the installation. Further the application of wireless MEMS system can provide enhanced system functionality and due to low noise densities. Identification results are compared to ones using data measured from traditional accelerometers and results indicate that the system identification using wireless MEMS system estimates system parameters accurately.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.80-86
• /
• 2001

This paper describes the harmonic analysis method of industrial power systems using PTW(Power Tools for Window). Voltage/current distortion levels and filter at steady state are calculated by harmonic load flow. Special features of its input processes PTW is utilized in order to facilitate creation of new simulation cares. Harmonics at transient state, the filter and the load variation, are analysed to diagnosis the power quality in actual industrial plant model.

• Journal of the Korean Society of Costume
• /
• v.54 no.5
• /
• pp.1-12
• /
• 2004

This Study has examined characteristics of the popular culture of the contemporary fashion show by each element as follows The fashion show place expanded its area when It moved its center because of not only the use of ordinary and public friendly place but also adjacent places post-modernism thought. The installation stage was produced by organic combination with the stage using object: The technology for the stage has produced dynamic variability and variety enough to expand the stage. The dramatic element of production technique was introduced to the fashion show to shorten gap with ordinary life and transfer a theme by facial expressions, gesture and pose. etc of a model In addition. its performance element combines other genre freely to be one time and viewers' participating type technique. At the minimalism element, clothing functions moderately as main factor of the fashion show: Technical elements are added to emphasize future Images. At sound tracks and sound effects, the show's overall atmosphere has been revived to remake various genre of music and improve images. At the fashion model, objective appearance boundary is collapsed to expand model concept and make tools of their own. The fashion show has external values of active movement of associated industry as well as economic boost enough to produce jobs, and internal values to provide aesthetic rest and satisfactions to let the ones. who are isolated from recreation values and the society, establish friendly relations with the society

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.81-86
• /
• 2006

Routing signal lines in PCB, line shapes would be straight or bent. time-domain and frequency-domain evaluation of the signal property and interference are archived by precise Modeling of differential signal line. Some of CAD tools can extract equivalent circuit model parameters. but it takes a long time and heavy loads. This paper introduces a basic RLC equivalent circuit model parameter extraction technique for bent differential structures using genetic algorithm by this technique, we can model equivalent circuit of bent differential structures more faster.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.2
• /
• pp.13-20
• /
• 2013

Construction industry has become a larger and highly competitive industry. A successful construction project cannot be achieved only by efficient and fast construction techniques but also reasonable material cost and adequate transferring time of materials to installation. The steel industry in East Asia has become the mainstream in overall steel industries in over the world during the middle of the 21st century. China, Japan and Korea has been the main exportation countries. However, even though the international economic failure, China has increased the exportation amount and became an only exporting country which must be considered a serious problem regarding competitiveness in the international steel exportation industry. Thus, this study analyses the factors affecting the supply and demand amount of reinforced bars in the domestic field and moreover suggesting a unit cost prediction model using the System Dynamics simulation methodology, one of powerful prediction tools using cause-effect relationships. It is expected that this study contributes to the domestic steel industry growth in competitiveness in the international industry. In addition, the methodology used in this paper presents the frameworks for appropriate tools for market trend analysis and prediction of other markets.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.251-254
• /
• 2001

Internal and external forces may be applied on the power cable in the both process of transportation and installation. Even though the EHV power cables have the structure of metal sheath and plastic jacket etc. to minimize these negative influences, the unusual forces result in the unexpected deformation of the cable. Compressing moulded XLPE model cable sheets were prepared and locally dented with round-edge and square-edge tools. All data were analyzed employing Weibull distribution. The breakdown strength of dented molded specimens showed lower values than the normal ones by 10-60%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.60-67
• /
• 2007

In this paper, a simulation method of the internal winding fault is proposed to calculate winding current and electromagnetic force in a distribution power transformer by suing FEM program. The model of the transformer is a single phase, 60[Hz], 1[MVA], 22.9[kV]/220[V], cable-type winding. The short-circuit current and electromagnetic force are calculated by FEM(Finite Element Method) program(Flux2D) and the results we verified with theoretical formula and PSPICE program. The simulation results are fairly good agreement with the other verified methods within 5[%] error rate. The turn-to-turn short-circuit current is 500 times of the rated current and the electromagnetic force is about $20{\sim}200times$. The method presented in this study may serve as one of the useful tools in the electromagnetic force analysis of the transformer winding behavior under the short circuit condition for design of the structure.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.117-137
• /
• 2008

Using the service innovation system model, the development of Korean online game industry is analyzed. The model proposed by Gallouj (2002) is modified in order to reflect IT service characteristics such as network externalities. Success factors and innovations patterns of Korean online game industry are examined. First, at the early stage of her growth, Korean online game industry was not supported or coordinated by any Government policies unlike DRAM, CDMA or TFT-LCD. Many parts of technical and service innovations were unintentionally initiated by online game developing ventures without predeterminde strategies. Second, the online game industry is basically a service industry so that users' needs and technical and service characteristics are intertwined to produce innovation. The innovation system of the online game industry is quite different from conventional product technological innovation systems in a sense that there are no blueprints for innovation as well as major players in the system. Third, Government's policies for promotion of IT industry such as the broadband infrastructure installation policy, the hi-tech venture promotion policy and the military exemption policy contributed greatly to development of the online game industry. However, these policy tools were not intended for online game industry but in the end gave a great impact on the service innovation system of the online game industry.