• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.60-65
• /
• 2013

Now days, the demands of new type hull lines and optimum design in relation with the EEDI (Energy Efficiency Design Index) regulation and eco-friendly high efficiency vessel design are mandatory clauses in Euro financial crises era. Therefore, in correlation with the above, we tried to find the optimum results and revealed the alterations of supporting structure for liftable car deck latch on PCTC. Generally, PCTC (Pure Car & Truck Carrier) design has been performed by 2 pillar space model F. E analysis without vehicle loads on liftable car deck to evaluate the structural adaptability. So, we applied mentioned vehicle loads on pillar and side transverse web on model to compare with not applied model and performed the ultimate strength analysis of improved design for the safety evaluation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.15-23
• /
• 2011

Driving directly in front of the driver of a vehicle driving in front of the vehicle and it is commonly known is affected. Responding to the car in front of the driver and the vehicle in front, and these follow the model is known as Three-Car-Following Model. Platoon vehicles to follow behind the driver's visibility is affected by the a tinted vehicle, and Parameters of the model is estimated to be affected also. In this study, in Three-Car-Followng Model parameters were estimated. and the parameter values differ about whether and how analysis was performed by the level of Visible Light Transmission Percentage. RTK GPS receiving data through field experiment analyzed based on sensitivity of three car by Visible Light Transmission Percentage and ${\gamma}$. And With statistical verification of driving directly in front of the driver in front of the vehicle and that the moving vehicle is influenced also confirmed. Also Visible Light Transmission Percentage is lowered, the vehicle in front of the driver's behavior showed sensitive reactions. In the further need to research for influence analysis of traffic flow capacity by the level of VLT.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.173-177
• /
• 2021

In this study, the torsional rigidity and durability of the stabilizer models with the hollow axis of light and large sized cars were compared and investigated each other. Model 1 was applied with the moment more than three times as much as model 2, but the maximum deformation of model 1 was seen to be about 2.6 times larger than that of model 2. Commonly, models 1 and 2 are seen to get the most stress at the neck of stabilizer bar link. Also, the maximum stress of model 1 was about 2.9 times larger than that of model 2. Model 1 at large car showed more than 20 times more deformed energy than model 2 at small car. Overall, it could be examined that the deformation energy of the bracket part on the side where the moment fixing the stabilizer bar was applied was greater than that of the stabilizer. It is thought that the analysis results in this study can be helped at the design of its convergent research as a durable component of the stabilizer at a light or large sized car.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.115-117
• /
• 2014

Recently, interesting of U-city with ubiquitous computing technologies has increased and u-city services can improve people's quality of life. Among the u-city services, traffice service is actively developed in our lives. In this paper, we propose the business model and business model process in u-car tracking service. To propose the research purpose, we examined the prior business model and investigated u-car tracking information. And also, we draw scenario and used it to identify business model. To efficiently understand proposed business model, we built business model process of u-car tracking service. The results of study, we proposed business model and business model process with stakeholder, benefiter and value model. This study concludes with implications of the study results as well as limitations and future research directions.

• Journal of Engineering Education Research
• /
• v.9 no.3
• /
• pp.5-21
• /
• 2006

The engineer's creativity is becoming more important as high value-added products are required. In this paper, a new curriculum model for creative engineering education has been developed. This study proposes the method of applying Chem-E-Car to the chemical engineering education for students to develop creativity. The Chem-E-Car is used as a given problem to students for developing safety study, teamwork, communication skill and creativity. The PBL(problem based Learning) is used in the class. The problem in this case is to make the Chem-E-Car, a shoebox sized car powered only by chemical reactions. Four types of Chem-E-Car such as turbine, rocket, voltaic cell and fuel cell are developed through out this program. The fuel cell powered Chem-E-Car is emphasized to students as new problems with constraints. This paper shows how the students solved the problems with creativity.

• Korean System Dynamics Review
• /
• v.14 no.3
• /
• pp.25-49
• /
• 2013

As global competition for green car, that is environmentally friendly car, is getting tougher, the governments and the related industries are putting their core efforts in its diffusion. However, the green car sales are disappointing so far. To overcome the gridlock, it is necessary to develop concrete analytical framework to understand the diffusion process. Based on causal loop analysis from the previous work, we have identified main variables and relationships of them in the diffusion process and developed a stock-flow diagram and mathematical formula for the main components. The model would be applied for further quantitative simulation on the diffusion process of green car and other innovative goods as well. Also, we have suggested constructive insights for the policy makers and for the related industries. First, it is important to increase consumers' willingness to consider through marketing and word of mouth to accelerate the diffusion process. Second, in the perspective of the industry, the market share of green car should be increased at the earliest possible stage and this could be done by enhancing each components of green car attractiveness(e.g. price, driving range, social infra). Third, companies should develop a balanced investment between consumer and technology sector through a flexible financial policy. Fourth, the government continuously has the role of investing in the related R&D and social infra building. We expect the green car diffusion model and related formula from the research can provide meaningful tools to analyze the diffusion process of other new and innovative goods based on its deep researched literature review.

• Management & Information Systems Review
• /
• v.15
• /
• pp.187-222
• /
• 2004

The existing fixed telematics facilities for car were restricting of efficiency, utilization, communication, possibility, so it become disconnected with reality in the domestic and foreign market within thy near future, like as the case of 'car-phone'. It is too difficult to make a various business model on the restrict basis. To solve these problems, We suggested Tablet PC system as a new mobile telematics platform. The telematics platform based on the Tablet PC realize the perfect office, because it shows an excellent portability, high power and extension, various input equipment, and environment of communication in the car. To realize this concreteness, it needs a proper marketing strategy for a new business model. For this purpose, We analyzed the structure of industry, selected a proper target market, and established the strategy of marketing. Additionally, We proposed new business models ; particularly Portal site, Car-Home network, Car Software Tuning, and T-Vaccine(Intelligent Car Inspection System). These are made possible by the only Tablet PC platform.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.1
• /
• pp.92-100
• /
• 2003

Using a quarter car model, an analytic method for performance estimation of a vehicle suspension system with respect to frequency response, RMS response and performance index is presented. From frequency response function, compromization of response performance to the whole frequency range is verified and from RMS response and performance index, sensitivity of ride md handling characteristics are examined. Using a full car model, sweet area(stable ride area) are determined and performance sensitivity is estimated according to the change of feedback gains. In order to esimate the output sensitivity, response we is displayed using a 3-dimensional contour plot. Design data n suggested for optimal design parameter esimation, which maximize the performance of the given suspension system.

• Journal of Power System Engineering
• /
• v.19 no.2
• /
• pp.70-77
• /
• 2015

Nowadays, car manufacturers applied many high strength steels such AHSS or UHSS to car bodies for weight lightening. Therefore, a variety of applied steel sheet to car bodies increased and the needs of simulation to evaluate weldability also increased in order to reduce the cost and time. In this study, resistance spot welding simulations for DP 780 Steel with 1.0 and 1.4 mm thickness were conducted with respect to lobe curve. 2 regression models to estimate tensile shear strength were suggested and they were second order polynomial regression model and optimized second order regression model. The performance of these models was evaluated in terms of the coefficient of determinant and average error rate.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.123-128
• /
• 2007

To predict the fire and smoke hazards of rail car with a evacuation model is essential for achieving life safety of all passengers in the event of fire. Currently, more than 30 different evacuation models are available and expected increasing demand in high population density areas as a metro train station. This paper includes brief history of evacuation models and review some key factors of design egress scenario, these are pre-movement time, egress route, location of fire, overturned carriage, and configuration of rail car. Applying the egress model for rail passenger car, users need to confirm the model's ability of physiological, psychological responses effecting to pre-movement time of individual or crowd unit, representation of complexity of carriage layout, and evaluation of effects of smoke.