• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.419-425
• /
• 1988

It would be very useful if the dynamic response of a vehicle over rough ground could be predicted at the early design stage. This became more promising with the recent progress in computer hardware and software technologies. In this study, a model of a passenger car has been developed for the analysis of its dynamic response. This model can be easily used for the other passenger cars with little modification. This passenger car was modeled to be composed of lumped masses, rigid bodies, and the suspension systems with nonlinear properties. Even though a commercial dynamic simulation program, ADAMS, was used in this study, the developed model is valid for any other simulation program. Finally, the validity of the developed model and the analysis result was verified by an experiment.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.317-327
• /
• 2012

This paper uses the sensibility engineering method to find the model of automobile most appealing to buyers in the $4^{th}$ and $5^{th}$ tier cities of China. Samples of class A & A0 cars were shown to 96 subjects in those cities to investigate their responses in relation to the concepts 'modern' and 'smart'. The result shows that even though men tend to be more sensitive to automobile models in general than women are, both genders showed similar responses to specific models when they were asked to identify a model 'magnificent', 'modern', 'lively', 'smart' or 'cute'. This implies that despite the gender differences in terms of aesthetic sensitivity, both men and women share similar taste in relation to the appearance of cars. Apart from aesthetics, however, men tend to pay a greater attention to the details of design and material used for the cars, while women tend to pay attention to higher priced and better looking cars.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.62-74
• /
• 2001

In this study, the prediction of performances and emissions of the gasoline engine of a light passenger car has been accomplished. The method of characteristics including friction, heat transfer, area change and entropy gradients was used to analyze the flow in the intake and exhaust systems. For in-cylinder calculation, the single-zone model was adopted for the periods of the intake, exhaust, compression and the expansion of the burnt gas and the 2-zone expansion model was applied to the period of combustion process. The simulation program was verified by comparison with the experimental values both for the naturally aspirated engine and the turbocharged engine showing good agreements. Using the simulation program, multi-valve system and turbocharging were examined as a means of increasing engine Performances.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.2
• /
• pp.227-237
• /
• 1998

A numerical simulation has been carried out for the automotive air conditioning system. The purpose of this simulation is to present the methods for simulating car air conditioning components, systems and cool-down performance by computerized mathematical model and to analyze the performance of A/C system. In analyzing the heat exchanger(evaporator and condenser), the finite volume model which has a merit in predicting the temperature field in detail because it can consider partial variation of thermal property and heat transfer coefficient is used. In analyzing the compressor, the polytropic approach which regards the actual compression process as a reversible polytropic process is employed. In analyzing vehicle passenger compartment, the thermal network is employed to simulate the car cool down process. This A/C system program can be used for analyzing a component performance when a component is alternated or designed and for analyzing the engine cooling system when A/C system is operated.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.14-19
• /
• 2017

The mortality rate of car-pedestrian accidents is quite high compared to the frequency of accident. Recently, governments and insurance companies tend to establish and implement new safety standards for pedestrian protection such as EURO-NCAP and K-NCAP. The performance for the pedestrian protection has been gradually improved, but it is still insufficient. Therefore, various studies for the pedestrian protection are being carried out. The car-pedestrian accident is simulated in order to study to the upper legform test of the EURO-NCAP protocol. A pedestrian dummy model is employed and the results are discussed.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.514-520
• /
• 2000

Numerical simulation is conducted to clarify the heat transfer and fluid flow characteristics of HVAC(Heating, Ventilating and Air-Conditioning) for Mugunghwa passenger car. The HVAC system is installed under the floor of carbody. This new HVAC system has a lot of merits in respect of the center of gravity of carbody, flow induced noise and reduction of condensation water etc. The standard k-epsilon turbulent model and SIMPLEC algorithm based on finite volume method are used to solve the physical HVAC model. To assure convergence, QUICK scheme for momentum equation and the first order upwind scheme for turbulent equations are used. From the results of simulation, the temperature and velocity magnitude are also distributed uniformly in the interior of car.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.283-288
• /
• 2006

This study developes the vibration model to estimate the vibration energy of damper/spring assembly(mainbase assembly) for car CD player, and this model is verified by experiment. From frequency response, response, we investigate the natural frequency and mode shape in the up/down direction. In order to determine the analysis frequency band, we investigate the excitation frequency from the vehicle test. As the characteristics of damper and spring is changed, we carry out the vibration test(transmissibility) and investigate the change of transmissibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.29-34
• /
• 2009

Diesel particulate filter (DPF) has been developed to optimize engine out emission, especially particulate matter (PM). One of the main important factors for developing the DPF is estimation of soot mass being accumulated inside the DPF. Evaluation of pressure drop over the DPF is a simple way to estimate the accumulated soot mass but its accuracy is known to be limited to certain vehicle operating conditions. The method to compensate drawback is adoption of integrating time history of the engine out PM and burning soot. Present study demonstrates current status of the soot estimation methods including the results from the engine test benches and vehicles.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.688-690
• /
• 2007

This letter presents a filter for a car navigation system integrating a low-grade inertial measurements unit (IMU) and a global positioning system receiver. The filter is designed according to the state variables to be estimated and the usable measurements. The usable measurements change from case to case, and the estimative state variables also change due to the measurements; therefore, multiple models must be used for real environmental maneuvers. In this letter, four models for land navigation are chosen and switched by rearranging the system matrix and resetting the error covariance matrices.

• Journal of Multimedia Information System
• /
• v.5 no.2
• /
• pp.111-114
• /
• 2018

Traffic accident analysis is important to reduce the occurrence of the accidents. In this paper, we analyze the traffic accident with Apriori algorithm to find out an association rule of traffic accident in Korea. We first design the traffic accident analysis model, and then collect the traffic accidents data. We preprocessed the collected data and derived some new variables and attributes for analyzing. Next, we analyze based on statistical method and Apriori algorithm. The result shows that many large-scale accident has occurred by vans in daytime. Medium-scale accident has occurred more in day than nighttime, and by cars more than vans. Small-scale accident has occurred more in night time than day time, however, the numbers were similar. Also, car-human accident is more occurred than car-car accident in small-scale accident.