• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.400-406
• /
• 1998

We investigated the preparation and guided-mode properties of $Ti:LiNbO_3$ waveguides which were fabricated by Ti in-diffusion. The diffusion method to reduce the Li out-diffusion was proposed. The optical guided-mode and propagation loss based on butt-coupling pigtailed with PMF-input were measured. How to improve the polishing grade of waveguide endfaces is newly proposed in this paper. To show the mode propagations, the BPM simulations of channel waveguide are described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1370-1375
• /
• 2001

Substructure coupling or component mode synthesis may be employed in the solution of dynamic problems for structure. The model is partitioned into several subdomains. and a generalized Craig-Bampton representation is derived. In this paper the mode sets(normal modes. constraint modes) have been employed for model reduction. A generalized model reduction procedure has been described. Those reduction methods which adapt constraint modes have been described in detail. As examples. a flexible structure and a 10 DOF damped system are analyzed. Comparison with a conventional reduction method based on a complete model has been made via eigenpairs and dynamic responses.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3314-3318
• /
• 2021

This paper presents a mode-matching analysis of the electromagnetic coupling between open cable trays in an indoor structure when an electric-line current is generated as an electromagnetic source. We validated the mode-matching method by comparing the mode-matching results with those computed from a commercial electromagnetic simulator and then investigated the strength of the electric-field coupled in a victim cable tray while varying the distances between cable trays and architectural surfaces. The results of this study provide geometrical information on the placement of open cable trays to avoid electromagnetic interference problems.

• 대한전자공학회논문지
• /
• 제23권1호
• /
• pp.27-35
• /
• 1986

The optical wave interactions in a sinusoidally corrugated dielectric waveguide are analyzed for the oblique incidence case. The coupled mode equations which govern the interactions are derived by the singular perturbation method for the TE-TE mode coupling. The results are compared with those of normal mode analysis by Wagatsuma et al. and total field analysis by Stegeman et al. Phase mismatching effects on the diffraction efficiency are also investigated.

• 한국전자통신학회논문지
• /
• 제12권3호
• /
• pp.445-450
• /
• 2017

본 논문에서는 CPW 선로를 기반으로 한 수직 결합 구조를 이용한 반전력의 방향성 결합기가 설계 및 제작되었다. CPW 수직 결합 구조의 우수 모드는 유전체 기판 두께의 반을 갖는 일반적인 CPW 선로로 해석될 수 있으며, 기수 모드는 CBCPW 선로로 해석될 수 있다. 반전력 방향성 결합기는 유전율 2.55, 기판 두께 0.76mm의 테프론 기판 상에 중심주파수 2.45 GHz, 대역폭 61.6%로 설계되었으며, 제작된 반전력 방향성 결합기는 중심주파수 2.45 GHz, 대역폭 66.1%를 가졌고, 중심주파수에서 반사손실과 격리도는 각각 19.52 dB와 19.47 dB를 가졌다.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.13-21
• /
• 1992

본 연구에서는 구조-음향모드 연성계수를 이용하여 심각한 소음문제가 발생하 는 경우의 효과적인 소음저감 방안을 제시하고, 제작된 차실모델에 대한 소음저감 시 뮬레이션을 수행한 후 그 결과를 실험치와 비교함으로써 수립된 소음저감 방안의 신뢰 도와 유용성을 확인하였다.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.599-605
• /
• 2003

이중모드 비대칭 canonical 구조 필터는 일반적으로 위성 중계기의 입력 멀티플렉서에 주로 사용된다. 본 논문에서는 비대칭형 canonical 필터의 용이한 합성 방법에 대하여 언급하였다. 비대칭형 canonical 필터의 결합행렬은 대칭형 canonical 필터의 결합 행렬로부터 평면 회전(plane rotation)과 같은 similarity transformation을 이용하여 구하였다. 비대칭형 canonical 필터의 결합 행렬을 구하기 위한 similarity transformation 과정에 있어서 회전 순서, 피벗(pivot), 회전각을 제시하였다. 본 논문에서 제시한 방법을 이용하여 8차 및 10차 비대칭 canonical filter의 결합 행렬을 추출하였으며, 비대칭형 canonical 필터의 주파수 응답 특성은 대칭형 canonical 필터의 주파수 응답 특성과 동일한 특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.40-42
• /
• 2004

This paper describes a method to find an optimal driving condition of vibratory gyroscope. Mechanical coupling between driving and sensing mode degrades the performance of vibratory gyroscope. When the resonant frequencies of driving and sensing parts are fixed, frequency and amplitude of driving source affect mechanical coupling. Thus, they should be optimally tuned. To investigate the influence of driving source on mechanical coupling, we measured frequency response and displacement of driving and sensing mode using laser vibromenter. The measured frequency response and displacement show that the gyroscope has minimum mechanical coupling when the frequency of driving source is set to the intermediate value of driving and sensing part resonant frequency. Measurement also shows that the mechanical coupling increases abruptly at a certain driving voltage as the voltage increases.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.637-644
• /
• 2019

Wireless power transfer (WPT) technology with various transfer mechanisms such as inductive coupling, magnetic resonance and capacitive coupling is being widely researched. Until now, power transfer efficiency (PTE) and power transfer capability (PTC) have been the primary concerns for designing and developing WPT systems. Therefore, a lot of studies have been documented to improve PTE and PTC. However, power consumption in the standby mode, also defined as the no-load mode, has been rarely studied. Recently, since the number of WPT products has been gradually increasing, it is necessary to develop techniques for reducing the standby power consumption of WPT systems. This paper investigates the standby power consumption of commercial WPT products. Moreover, a standby power reduction technique for WPT systems via magnetic resonance coupling (MRC) with a parallel resonance type resonator is proposed. To achieve a further standby power reduction, the voltage control of an AC/DC travel adapter is also adopted. The operational principles and characteristics are described and verified with simulation and experimental results. The proposed method greatly reduces the standby power consumption of a WPT system via MRC from 2.03 W to 0.19 W.

• Journal of the Optical Society of Korea
• /
• 제7권2호
• /
• pp.53-58
• /
• 2003

We report the formation of inner cladding modes in the optical fiber having an inner cladding structure. The inner cladding layer located between the core- and the cladding- layers of a conventional fiber might have, so called, inner cladding mode(s). The brief history of the inner cladding fiber and the spectral properties of the inner cladding mode are presented. By utilizing fiber gratings, the spectral properties of the inner cladding mode formed in Dispersion Compensating Fiber (DCF) are discussed. It was observed that one resonant peak of a long-period fiber grating was not sensitive to the variation on the cladding surface. With a fiber Bragg grating, a small group of unusual resonant Peaks was observed between the main Bragg Peak and the series of usual Peaks resulted from the mode coupling to counter-propagating cladding modes. Within the DCF by using fiber gratings, it is noted, at least one mode can be coupled to the inner cladding mode and a few outer cladding modes are severely affected by the inner cladding of the fiber.