• 한국콘텐츠학회논문지
• /
• 제14권9호
• /
• pp.102-109
• /
• 2014

HEVC의 화면내 예측 부호화는 예측 모드를 기존 H.264/AVC에 비해서 최대 35개까지 확장함으로써 향상된 부호화 효율을 갖는다. 반면 화면내 부호화의 복잡도 또한 크게 증가하여 복잡도 감소를 위한 고속 부호화 기법이 요구된다. 본 논문에서는 HEVC의 참조모델인 HM에 화면내 고속 부호화를 위하여 채택된 RMD(Rough Mode Decision)에 추가적으로 복잡도 감소를 위하여 고속 화면내 예측 모드 결정 기법을 제시한다. 본 기법은 후보 모드를 결정하기 위한 RMD 과정에서의 탐색 모드 수와 선택된 후보 모드로부터 최종 모드를 결정하기 위한 탐색 모드 수를 제한하는 방법을 결합하여 모드 결정을 위한 복잡도를 감소한다. 본 제안 기법은 실험결과 HM 12.0에서 다양한 테스트시퀀스에서 HM 대비 1.0%의 비트 증가로 13.2%의 복잡도를 감소시킬 수 있었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권1호
• /
• pp.39-46
• /
• 2021

This study confirmed the usefulness of the copper filter according to the mode change by comparing and analyzing the energy change according to the application of the copper filter and the change in effective dose and image quality according to the distance to the subject in the DR(Digital Radiography) system. The average energy increased when the copper filter was applied and the reduction rate by 50% of mAs was increased as the thickness of the copper filter increased according to the application of the 10 kVp rule in AEC mode. The effective dose decreased as the thickness increased when the copper filter was applied in AEC(Automatic Exposure Control) mode and manual mode according to the application of the 10 kVp rule, and the decrease rate decreased with increasing 10 kVp increments. As a result of analyzing the dicom images for AEC mode and manual mode with Image J. the PSNR(Peak Signal to Noise Ratio) values were approximate values of less than 30 dB for each mode and for each copper filter thickness. When the copper filter was applied, the average energy increased, so when the 10 kVp rule was applied, the mAs for each mode could be reduced, and the effective dose could also be reduced. However, as the distance and tube voltage increased, the reduction rate of mAs decreased, and the quality of the image was found to decrease when the copper filter was applied, but there was no difference in quality of the image when the copper filter thickness increased.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1868-1871
• /
• 2007

This paper proposes a novel scheme to significantly reduce mode decision time by predicting optimal mode candidates. Unlike previous fast mode decision algorithms computing RDcost in a pre-defined mode order, the proposed scheme predicts optimal mode candidates and calculates their RDcosts first, increasing the possibility to satisfy early-exit conditions sooner, resulting in fast mode decision. This H.264 mode decision time reduction enables small computing power mobile devices to handle H.264 encoding effectively. Extensive simulations show that, when compared with JM10.2, AMD and LCIMS, the proposed scheme boosts H.264 encoding speed by up to 575% with a reasonable image quality degradation.

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.399-406
• /
• 2019

본 연구의 목적은 디지털 혈관 조영 촬영장치를 이용한 검사 시 X선관, 환자 테이블, 검출기 또는 환자 등의 기하학적 특성에 따라 실무자가 수시로 변화시켜 적용할 수 있는 매개변수에 대해 알아보고 이에 따른 환자 및 의료진의 방사선 피폭선량을 감소시키는 방안에 대해 알아보고자 하였다. 기하학적 특성들에 따라 각각 fluoroscopy mode와 Digital subtraction angiography로 촬영하고 유효 선량으로 환산한 값을 비교하였다. 연구결과 FPS mode에 따른 선량은 FPS mode를 낮게 설정할수록 선량이 30-40%까지 감소하였다. X선관 각도에 따른 선량은 AP View에서 가장 높게 측정되었고 머리 방향으로 각도가 들어갈수록 선량이 낮게 측정되었다. FOV가 확대될수록 선량이 1.2-1.6배 증가하였고 X선관과 테이블의 거리가 가까워질수록 약 10% 증가하였다. X선관과 평판형 검출기의 거리가 100 mm 멀어질수록 선량이 20-30% 증가하였다. 결론적으로 혈관 조영검사 시 다양한 기하학적 특성들은 실무자가 수시로 변화시켜 적용할 수 있는 매개변수이며 다양한 상황에서 적합한 기하학적 특성들을 고려하여 적용함으로써 적절한 선량 감소 효과를 기대할 수 있다.

• 한국ITS학회 논문지
• /
• 제22권6호
• /
• pp.49-65
• /
• 2023

최근 전세계적으로 환경에 대한 관심이 커지고, 국제사회가 '탄소중립'을 선언하면서 '탄소'를 고려한 다양한 수단선택모형 연구가 실시되고 있으나, 탄소에 대한 개인성향을 반영한 연구는 미비한 실정이다. 따라서, 본 연구에서는 탄소저감형 이동수단(전동킥보드 등)을 포함한 대중교통 서비스로 SPT(Sustainable Public Transit)라는 새로운 수단을 제시하고, 수도권 통근자를 대상으로 실시한 SP(Stated Preference)조사를 활용하여 요인분석을 통해 응답자의 탄소에 대한 개인성향을 분석한 후, 다항로짓모형을 활용하여 SPT에 대한 수단선택모형을 구축하였다. 분석 결과, SPT 잠재선호에 영향을 미치는 요인으로 성별, 소득, 개인성향('새로운경로 탐색에 대한 열정', '수단간 환승 선호', '탄소저감지식', '탄소저감실천') 변수가 유의한 것으로 나타났다. 따라서, 본 연구는 수단선택모형 구축시 수단의 속성변수로 탄소배출량을 선정하거나, 탄소저감과 관련한 개인성향 변수를 구축했다는 부분에서 의의가 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.216-221
• /
• 2002

In this paper, the transmitted noise reduction of smart panels of which passive piezoelectric shunt damping is used, is experimentally studied. Shunt damping experiments are based on the measured electrical impedance model. A passive shunt circuit composed of inductors, and a load resistor is devised to dissipate the maximum energy into the joule heat energy. For multi-mode shunt damping, the shunt circuit is redesigned by adding a blocking circuit. Also the optimal location of the piezoelectric patch is studied by FEM in order to cause the maximum admittance from the patch for each mode of aluminum plate. In results, the transmitted sound pressure level of panels is efficiently reduced for multi-modes

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.769-773
• /
• 2004

Conventional SVPWM method has null switching vectors. Null switching vectors cause high common-mode voltage in induction motor drive system. The newly developed common mode voltage reduction PWM technique don't use zero switching state for inverter control. It is realized by changing software without additional hardware. Simulation and experimental results show that proposed method are reduced common mode voltage more than conventional method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.384-388
• /
• 2004

High frequency common mode voltage produced by power inverters are a major cause of conducted EMI, creating motor ground currents, bearing currents and other harmful by products. This paper focuses on a new SVPWM method with random PWM injection to reduce conducted EMI noise. A New PWM technique associated with the common mode voltage can be significantly reducing and contributes to mitigate. The common mode voltage to $50\%$ in comparison with that for conventional SVPWM technique. Validation of the theory and reduction methods are then performed experiment ally based on an induction motor drive.