• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.28-37
• /
• 2017

Purpose: This paper proposes a procedure that may infer and identify interaction failures in a module. Methods: In design FMEA, we defined an interaction model between components and proposed a method for selecting a single component by using the standard specification classification table and four methods for choosing the related components. We also introduced the function tree for function and requirement characteristic analysis and proposed utilization of standard stress lists and 1st and 2nd stress analysis tables to determine the effect the stress analysis has on interactions. Finally, the interaction mechanism diagram was proposed and used to infer the failure mechanism. Process FMEA also established procedures in a similar way. Results: We established a procedure for predicting the failure mode due to interaction between components based on Company A's multi-step FMEA procedure. Conclusion: By applying the proposed interaction FMEA procedure to the development model, we were able to confirm the effect of the new derivation on the failure mode of interaction, which was not predicted by the existing FMEA.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.20-27
• /
• 1996

Ice loads can determined by many factors like ice properies and dimension, velocity and type of structures. The magnitude of ice load varies with the failure mode which can be predicted by failure maps if the aspect ratio and strain rate are known. To reduce the ice force, various types of structure have been investigated and it is now known that the identor shape plays an important role in reducing ice load on Arctic offshoe structures. The conical and wedge structures are good applied examples in the Arctic region. In this study, ice forces on single wedge indentors are investigated for crushing failure mode. The ice loads on wedged indentors are compared with those on cylindrical structures. Also the concept of "ice annual"is introduced to verify the ice loads to multi and single wedge structures.tructures.

• 대한치과기공학회지
• /
• 제30권2호
• /
• pp.79-86
• /
• 2008

The purpose of this study was to investigate the effect retention element formed by metal surface treatment method on the bond strength of indirect composite resin and metal. The metal specimens were cast from Ni-Cr alloy($Rexillium^{(R)}$ III). They were divided into 5 groups by applied retention element: $50{\mu}m$ aluminium oxide sandblasting group, $250{\mu}m$ aluminium oxide sandblasting group, 0.2mm retention crystal group, 10% $H_{2}SO_{4}$ solution etching group, $110{\mu}m$ $Rocatec^{TM}$ Plus system group. Total 50 metal specimens were veneered with Sinfony indirect composite resin system. Specimens were tested for shear bond strength on an Instron universal testing machine and fracture mode of fractured specimens were analyzed by SEM and EDS. 1. 0.2 mm retention crystals were most effective in improving the resin-metal shear bond strength (p<0.05). 2. Sandblasting by $250{\mu}m$ aluminium oxide were more effective than sandblasting by $50{\mu}m$ aluminium oxide in improving the resin-metal shear bond strength(p<0.05). 3. Fracture mode of resin-metal fractured surface were cohesive failure mode in 0.2mm retention crystal, mixed failure mode in sandblasted specimens, etched specimens and the specimens sandblasted with $110{\mu}m$ $Rocatec^{TM}$ Plus system.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.73-77
• /
• 2004

Failure predictions of composite single-lap bonded joints were performed considering both of composite adherend failure and bondline failure. An elastic-perfectly plastic model of adhesive and a delamination failure criterion are used. The failure prediction results such as failure mode and strength have very good agreements with the test results of joint specimens with various bonding methods and parameters. The influence of variations in the effective strength (that is, adhesion performance) and plastic behavior of adhesive on the failure characteristics of composite bonded joints are investigated numerically. The numerical results show that optimal joint strength is archived when adhesive and delamination failure occur in the same time.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.81-84
• /
• 2001

In the power system of a satellite, solar array and a battery have directly impact on the life time of the satellite, and their stable operation is decided by whether their states are in the steady state operation or not. In this study, solar array capacity and battery characteristics of proposed communication satellite are designed and simulation is conducted according to the operation mode. Each operation mode is classified as the normal and worst case modes, respectively. The normal mode is analyzed under daylight and the eclipse with the EHT burn, and the worst case modes which have solar cell circuit failure, and battery cell failure are analyzed too.

• Structural Monitoring and Maintenance
• /
• 제8권4호
• /
• pp.345-360
• /
• 2021

This paper presents an analytical approach to calculate the buckling load of the cylindrical ring structures subjected to both hydrostatic and hydrodynamic pressures. Based on the conservative law of energy and Timoshenko beam theory, a theoretical formula, which can be used to evaluate the critical pressure of buckling, is first derived for the simplified cylindrical ring structures. It is assumed that the hydrodynamic pressure can be treated as an equivalent hydrostatic pressure as a cosine function along the perimeter while the thickness ratio is limited to 0.2. Note that this paper limits the deformed shape of the cylindrical ring structures to an elliptical shape. The proposed analytical solutions are then compared with the numerical simulations. The critical pressure is evaluated in this study considering two possible failure modes: ultimate failure and buckling failure. The results show that the proposed analytical solutions can correctly predict the critical pressure for both failure modes. However, it is not recommended to be used when the hydrostatic pressure is low or medium (less than 80% of the critical pressure) as the analytical solutions underestimate the critical pressure especially when the ultimate failure mode occurs. This implies that the proposed solutions can still be used properly when the subsea vehicles are located in the deep parts of the ocean where the hydrostatic pressure is high. The finding will further help improve the geometric design of subsea vehicles against both hydrostatic and hydrodynamic pressures to enhance its strength and stability when it moves underwater. It will also help to control the speed of the subsea vehicles especially they move close to the sea bottom to prevent a catastrophic failure.

• 한국산학기술학회논문지
• /
• 제19권8호
• /
• pp.64-70
• /
• 2018

무기 체계(or 구성품) 개발은 한정된 개발기간과 비용 등의 제한으로 시험 횟수가 많지 않아, 고장관련 축적된 데이터의 규모도 적다. 그러나 운용 중 발생한 고장 및 정비내역은 많은 부분 전산 데이터로 관리하고 있기 때문에 이를 활용한 무기 체계(or 구성품)의 고장원인 분석은 가능하다. 다만 다양한 무기체계의 고장 및 정비내역 작성 규격이 각 군 별, 업체별 상이하고, 고장 원인의 구체적 내역은 비정형 텍스트 데이터로 기술되어 있기 때문에 이를 분석하는데 어려움이 있었다. 그러나 오늘날 빅데이터 처리 기술과 기계학습(Machine Learning) 알고리즘의 발전, HW연산 능력의 개선과 맞물려, 상기와 같은 비정형 데이터를 처리 할 수 있는 여러 가지 방법들이 시도 되고 있으며, 주요한 연구 분야로 활발히 연구되고 있다. 본 논문에서는 국방 무기 체계(or 구성품)의 고장/정비 관련 비정형 데이터를 기계학습 기법 중 하나인 doc2vec을 적용하여 고장사례 분석 방안에 대하여 제시한다.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.667-675
• /
• 2004

본 논문은 CFRP 격자 보강재로 보강한 콘크리트 슬래브의 파괴형태와 보강설계기준에 대한 연구이다. 실험 연구에서 채택한 시험변수로는 CFRP 격자 보강재의 양, 보강 모르타르의 깊이, 앵커핀의 유무, 압축부 보강 등이다. 연구에 의하면 CFRP 격자 섬유 보강량에 따라 파괴형태가 다르게 나타났는데 낮은 보강수준에서는 FRP 격자의 인장 파단파괴를 보였고 보통의 보강정도에서는 격자층 계면전단파괴가 발생하였다. 높은 보강량을 가진 슬래브에서는 사인장전단파괴 형태를 나타냈다. 보강 효과는 FRP 격자 보강재의 양이 증가할수록 증대하였으나 취성 전단파괴에 의해 연성은 감소되었다. 따라서 FRP 격자 보강량을 제한함으로써 갑자기 하중 지지력을 상실하는 전단파괴를 피할 수 있다. 파괴형태 중 CFRP 파단파괴가 바람직한데 그 이유는 섬유파단 후에도 극한상태에서 보강 전 슬래브의 하중지지력과 연성을 가지고 있기 때문이다. 마지막으로 본 논문은 CFRP 격자섬유보강설계기준과 과정을 제시하고 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권3호
• /
• pp.55-63
• /
• 2015

콘크리트용 후설치 세트앵커는 콘크리트가 경화된 후에 설치되는 앵커이며 시공 장비의 발달과 시공의 유연성 및 용이성으로 사용량이 증가하고 있는 실정이다. 전단하중을 받는 앵커는 강재 파괴, 콘크리트 파열파괴, 콘크리트 프라이아웃 파괴 등의 대표적인 파괴모드를 보인다. 본 연구에서는 매입깊이, 연단거리 및 콘크리트 강도를 변수로 한 세트앵커의 실험 및 유한요소 해석 결과를 통하여 콘크리트에 매입된 저하중용 후설치 세트앵커의 전단 파괴거동에 미치는 영향을 규명하는 것을 그 목적으로 한다. 매입깊이 변수의 실험 결과 매입깊이가 얕을수록 콘크리트 강도의 영향이 큰 것으로 나타났다. 연단거리 변수의 실험 결과 동일한 파괴모드를 보이면서 콘크리트 강도의 영향이 크지 않은 것으로 나타났다. 강재 파괴가 발생한 실험 결과를 비교해 보았을 때 콘크리트 강도가 클수록 변위가 상대적으로 더 작게 나타났다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.607-612
• /
• 2005

Check valves playa vital role in the operation and protection of nuclear power plants. Check valves failure in nuclear power plants often lead to a plant transient or trip. An overview of the failure history of check valves needs to identify key area where resources can be best applied to further improve their reliability, and provide cost effective means for failure reduction. The analysis of historical failure data gives information on the populations of various types of check valves, the systems they are installed in, failure modes, effects, methods of detection, and the mechanisms of the failures. The results presented are based on information derived from operating records, nuclear industry reports, manufacturer supplied information. A majority of check valve failures are caused by improper application. Failure modes are identified for swing and lift check valves. Failures involving improper seating and valve disc stuck comprised the largest percentage of failures.