• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.606-612
• /
• 2012

A highly efficient multi-mode balanced power amplifier(PA) structure is proposed for W-CDMA handset applications. The proposed PA has 2-stage amplifier configuration and the stage-bypass and load impedance switching techniques were applied to enhance power efficiency at medium power level as well as low output power level. Using the two techniques, four highly efficient power modes were realized. To demonstrate the usefulness of the proposed structure, a GaAs HBT balanced PA module was designed, fabricated, and measured.

• MALSORI
• /
• no.52
• /
• pp.145-160
• /
• 2004

In this paper, a new noise compensation method based on the eigenvoice framework in feature space is proposed to reduce the mismatch between training and testing environments. The difference between clean and noisy environments is represented by the linear combination of K eigenvectors that represent the variation among environments. In the proposed method, the performance improvement of speech recognition systems is largely affected by how to construct the noisy models and the bias vector set. In this paper, two methods, the one based on MAP adaptation method and the other using stereo DB, are proposed to construct the noisy models. In experiments using Aurora 2 DB, we obtained 44.86% relative improvement with eigen-environment method in comparison with baseline system. Especially, in clean condition training mode, our proposed method yielded 66.74% relative improvement, which is better performance than several methods previously proposed in Aurora project.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.370-377
• /
• 2017

This paper presents a simple noise margin (NM) model of MOS current mode logic (MCML) gates especially in CMOS processes where a large device mismatch deteriorates logic reliability. Trade-offs between speed and logic reliability are discussed, and a simple yet accurate NM equation to capture process-dependent degradation is proposed. The proposed NM equation is verified for 130-nm, 110-nm, 65-nm, and 40-nm CMOS processes and has errors less than 4% for all cases.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.4
• /
• pp.265-272
• /
• 2018

This paper proposes a new control method for the supercapacitor (SC) to compensate the pulsed load and to enhance the power quality of the DC microgrid. By coordinating the operating frequency, the SC is controlled to handle the surge current, while the low-frequency current component is dealt with by the remaining sources in the system. The operation mode of the SC unit is automatically changed based on the state of charge and DC bus voltage level. Meanwhile, the mismatch in the power demand is covered by the SC unit by regulating the DC bus voltage level. The effectiveness of the proposed method is verified experimentally by the prototype with two distributed generators and one SC unit.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.71-74
• /
• 1998

$Er^{3+}$ doped $NdF_{3}$ single crystalline thin films with smooth, microcrack-free, and high-crystalline quality were grown on $CaF_{2}(111)$ substrate at $500^{\circ}C$by molecular beem epitaxy(MBE). The relation-ship between subcell and supercell showing the reconstructed $3^{1/2} \times 3^{1/2}$ structure was studied by reflection high-energy electron diffraction(RHEED) investigation. The film surface and the growth mode were examined in studied by RHEED patterns and atomic force microscope(AFM) images ex situ. The crystallinity of film and the lattice mismatch between $NdF_{3}Er}^{3+}(0002)$ film and $CaF_{2}(111)$ substrate depending in the $Er^{3+}$ concentration were investigated by X-ray rocking curve analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.39-44
• /
• 1996

Matched field localization schemes often show a high sensitivity to acoustic variabilities due to mismatch between assumed and actual environments. In this paper, we focus on the effect of source motion or Doppler on matched field processing (MEP). to accomplish this, MFP is extended to treat a moving source problem with normal mode description of the sound field. the extension involves both the temporally nonstationary and spatially inhomogeneous nature of the sound field generated by a time-harmonic point source moving uniformly in a stratified oceanic waveguide. It is demonstrated that the impact of source motion can be significant to MEP although the velocity of a moving source is much smaller than the sound velocity of the oceanic waveguide. In addition, a criteria for minimizing the effect of Doppler on MFP is discussed.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.246-248
• /
• 2004

It has been well known that ductile fracture of steels is accelerated by triaxial stresses. The characteristics of ductile crack initiation in steels are evaluated quantitatively using two-parameters criterion based on equivalent plastic strain and stress triaxiality. This study provides the fundamental clarification of the effect of strength mismatching, which can elevate plastic constraint due to heterogeneous plastic straining, loading mode and loading rate on critical condition to initiate ductile crack from notch root using equivalent plastic strain and stress triaxiality based on the two-parameter criterion obtained on homogeneous specimens under static tension. The critical condition to initiate ductile crack from notch root for strength mismatched bend specimens under both static and dynamic loading would be almost the same as that for homogeneous tensile specimens with circumferential sharp notch under static loading.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.170-170
• /
• 1999

We studied Nb growth mode on Cu(100) surface by scanning tunneling microscopy (STM) at room temperature. Nb/Cu is immiscible at room temperature and thus is an ideal system for studying surface alloy formation. Initially deposited Nb atoms are incorporated subsurface on Cu(100). After annealing, they are preferentially found at step edges and appear as bright dots surrounded by dark rings. Ordering emerges from step edges as annealed. Ordered ({{{{ SQRT { 5} }$\times${{{{ SQRT { 5} }}}})R 26.6$^{\circ}$phase Nb structure is formed at $\theta$<0.2ML after annealing to 50$0^{\circ}C$. At higher coverage, $\theta$>0.25, annealing leads to p(2$\times$2) phase. due to large mismatch in lattice parameters, the domain is limited to a few tens of nm2. Growth kinetics of the system will be discussed.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.198-199
• /
• 2017

This paper proposed a new control method for supercapacitor (SC) to compensate the pulse load transient and enhance the power quality of dc microgrid. By coordinating the operation frequency, the supercapacitor is controlled to handle the surge current component while the low-frequency current component is dealt with by remaining sources in the system. Based on the state of charge and dc bus voltage level, the SC unit operation mode is automatically decided. Meanwhile, the dc bus voltage level indicates the power demand of the whole system; by regulating the dc bus voltage, the mismatch of power demand is covered by SC unit. The effectiveness of proposed method is verified by experiment prototype formed by two distributed generation and one supercapacitor unit.

• Smart Structures and Systems
• /
• v.5 no.6
• /
• pp.633-644
• /
• 2009

A simple method has been developed to detect the bonding condition of active fiber composites (AFC) adhered to the surface of a host structure. Large deformation actuating capability is one of important features of AFC. Edge delamination in adhesive layer due to large interfacial shear stress at the free edge is typically resulted from axial strain mismatch between bonded materials. AFC patch possesses very good flexibility and toughness. When an AFC patch is partially delaminated from host structure, there remains sensing capability in the debonded part. The debonding size can be determined through axial resonance measured by the interdigitated electrodes symmetrically aligned on opposite surfaces of the patch. The electrical impedance and modal response of the AFC patch in part adhered to an aluminum plate were investigated in a broad frequency range. Debonding ratio of the AFC patch is in inverse proportion to the resonant frequency of the fundamental mode. Feasibility of in-situ detecting the progressive delamination between AFC patch and host plate is demonstrated.