• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.137-138
• /
• 2013

This paper proposes the single-phase double-conversion UPS(Uninterruptible Power Supply) with ESS(Energy Storage System). The Proposed system is operating in three modes, which are normal mode, battery mode, and bypass mode. Not only in black-out but also in peak load times, the system is operating in battery mode which is using the stored energy of the battery to manage the power effectively. The validity of proposed system could be verified by simulations and experiments.

• 비파괴검사학회지
• /
• 제29권2호
• /
• pp.93-97
• /
• 2009

자기변형 탐촉자는 유도초음파를 적용한 장거리 배관 검사 시에 유용하게 사용되는데 특히 그 신호패턴이 배열형 압전탐촉자를 사용한 유도초음파 신호보다 깨끗하고 단순하기 때문에 단일 결함에 의한 신호패턴을 해석할 수 있을 뿐만 아니라 결함 신호의 진행 상황을 분석함으로써 배관의 구조 건전성 감시(structural health monitoring)에도 사용되고 있다. 그러나 실제 현장 검사에서는 유도초음파의 방향성신호, 잔향효과, 모드변환, 구조물 등에 의한 의사 신호 또는 거짓 신호가 나타나기 때문에 결함 평가 시에 주의를 요한다. 본 연구에서는 실제 상황을 모의한 장거리배관 mock-up에서 발생하는 모드변환 신호를 실험적으로 검증하고 해석하였다. 자기변형 스트립 탐촉자에서 발생한 비틀림진동 T(0,1) 모드와 휨진동 F(1,3) 모드 또는 종진동 L(0,2) 모드 간에 모드변환이 발생함을 확인하였고 이러한 모드변환이 발생하는 원인을 스트립 탐촉자 및 검사대상체의 전자기적 재료 특성 및 구조 측면에서 해석하였다.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.42-48
• /
• 1994

In this paper, a low power and high speed flash Analog-to-Digital Converter using current-mode concept is proposed. Current-mode approach offers a number of advantages over conventional voltage-mode approach, such as lower power consumption small chip area improved accuracy etc. Rescently this concept was applied to algorithmic A/D Converter. But, its conversion speed is limited to medium speed. Consequently this converter is not applicable to the high speed signal processing system. This ADC is fabricated in 1.2um double metal CMOS standard process. This ADC's conversion time is measured to be 7MHz, and power consumption is 2.0mW, and differential nonlinearity is less than 1.14LSB and total harmonic distortion is -50dB. The active area of analog chip is about 350 x 550u$m^2$. The proposed ADC seems suitable for a single chip design of digital signal processing system required high conversion speed, high resolution small chip area and low power consumption.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.166-172
• /
• 1995

A novel passive TE/TM polarization mode converter is fabricated by using poled polymer waveguides. The optic axis of the poling induced waveguide is slowly rotated by using a slowly varying structure of poling electrodes. Thus the polarization conversion is achieved as the guided mode propagates through the waveguide. The proposed device is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. For the rotation length of 1 mm, the TE polarization of the guided mode is successfully converted to the TM polarization with negligible loss. Based on the simulation results, we fabricated the polarization converter which is tested by using 1.3 $\mu$m laser diode. TE to TM mode conversion is observed with a polarization extinction ratio higher than 30 dB, and the excess loss is less than 1 dB. The polarization conversion is relatively insensitive to wavelength since the device contains no periodic structures. These devices are easier to fabricate than others containing periodic structures.

• Journal of Power Electronics
• /
• 제9권4호
• /
• pp.575-581
• /
• 2009

In this paper two modes of operating a wound rotor induction machine as a generator at sub-and super-synchronous speeds in wind energy conversion systems are investigated. In the first mode, known as double fed induction generator (DFIG), the rotor circuit is fed from the ac mains via a controlled rectifier and a forced commutated inverter. Adjusting the applied rotor voltage magnitude and phase leads to machine operation as a generator at sub-synchronous speeds. In the second mode, the machine is operated in a slip recovery scheme where the slip energy is fed back to the ac mains via a rectifier and line commutated inverter. This mode is described as double output induction generator (DOIG) leading to increase the efficiency of the wind-to electrical energy conversion system. Simulated results of both modes are presented. Experimental verification of the simulated results are presented for the DOIG mode of operation, showing larger amount of power captured and better power factor when compared to conventional induction generators.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.117-123
• /
• 2003

In a bi-fuel engine using gasoline and LPG fuel, with the current ignition timing for gasoline being used, the effective performance could not be taken in LPG fuel supply mode. The ignition timing in LPG fuel mode must be advanced much more than that of gasoline mode for the compensation of its lower flame speed, due to engine torque drop. This study aims to develop the control system for ignition spark timing conversion which is composed of hardwares and control algorithm for gasoline/LPG engine. We propose the control system which can advance the ignition spark timing in LPG fuel mode more than used in gasoline fuel mode. The advance of ignition timing is achieved by change of the ignition dwell time of coil igniter. The engine torque and F/E(Fuel-Economy) in LPG fuel mode are measured to evaluate the difference of engine performance between before and alter changing ignition spark timings. The engine torque and F/E are increased respectively, which proves the developed control system is effective so much for gasoline and LPG bi-fuel engine.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.408-412
• /
• 2018

이 논문에서는 40nm CMOS 공정을 이용하여 제작된 26GHz 가변 이득 증폭기에 대한 연구를 수행하였다. 79GHz를 사용하는 자동차 레이더의 경우 주파수 특성상 회로 전체를 79GHz로 설계 및 매칭 하기 보다는 Down conversion 하여 낮은 주파수대역으로 구동하거나 Up conversion 전에 낮은 주파수 대역을 이용하는 것이 설계 및 구동에 유리하다. 실제적으로 TTD(True Time Delay)를 통해 시간지연을 이용하는 Phased Array System 의 경우에도 현재 기술로는 낮은 주파수로 Down conversion하는 것이 오차를 줄이고 실제적 시간지연을 구현하는데 좋다. 79GHz 주파수의 1/3인 26GHz 주파수 대역에서 동작하는 VGA(Variable Gain Amplifier)에 대하여 설계하였고 1-stage의 cascode amplifier 형태로 구성된 회로에서 VDD : 1V, Bias 0.95V, S11은 < -9.8dB(Mea. High gain mode), S22 <-3.6dB(Mea. High gain mode), Gain : 2.69dB(Mea. High gain mode), P1dB : -15 dBm (Mea. High gain mode) 로 설계되었다. Low gain mode 에서는 S11은 < -3.3dB(Mea. Low gain mode), S22 < -8.6dB(Mea. Low gain mode), Gain : 0dB(Mea. Low gain mode), P1dB : -21 dBm (Mea. Low gain mode)로 설계되었다.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.253-266
• /
• 2023

The time-reversal method is employed to improve the ability of pipeline defect detection, and a new approach of identifying the pipeline defect depth is proposed in this research. When the L(0,2) mode ultrasonic guided wave excited through a lead zirconate titinate (PZT) transduce array propagates along the pipeline with a defect, it will interact with the defect and be partially converted to flexural F(n, m) modes and longitudinal L(0,1) mode. Using a receiving PZT array attached axisymmetrically around the pipeline, the L(0,2) reflection signal as well as the mode conversion signals at the defect are obtained. An appropriate rectangle window is used to intercept the L(0,2) reflection signal and the mode conversion signals from the obtained direct detection signals. The intercepted signals are time reversed and re-excited in the pipeline again, result in the guided wave energy focusing on the pipeline defect, the L(0,2) reflection and the L(0,1) mode conversion signals being enhanced to a higher level, especially for the small defect in the early crack stage. Besides the L(0,2) reflection signal, the L(0,1) mode conversion signal also contains useful pipeline defect information. It is possible to identify the pipeline defect depth by monitoring the variation trend of L(0,2) and L(0,1) reflection coefficients. The finite element method (FEM) simulation and experiment results are given in the paper, the enhancement of pipeline defect reflection signals by time-reversal method is obvious, and the way to identify pipeline defect depth is demonstrated to be effective.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.296-307
• /
• 2010

This paper deals with the energy transmission ratio of the elastic waves transmitting through a solid wall. Based on the displacement of the reflected and transmitted waves relative to the incident waves, the energy transmission ratio of the wave was obtained by multiplying the vibration velocity and stresses. Numerical calculation provided with the transmission ratio and refraction angle corresponding to the incidence angle, and it showed the mode conversion from the incident longitudinal wave to the transmitted transverse wave in particular incidence angle range. The paper established a procedure to find the incidence angle of the maximum energy transmission ratio and confirmed it by experiment.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.201-207
• /
• 2013

This paper propose seamless transfer operation between grid-connected and stand-alone mode in the three-phase inverter for microgrid. The inverter operates grid-connected mode and stand-alone mode. Grid-connected mode is the inverter connected to grid and stand-alone mode is to deliver energy to the load from inverter at grid fault. When conversion from gird-connected to stand-alone mode, the inverter changes current control to voltage control. When grid restored, the inverter system is conversion from stand-alone to grid-connected mode. In this case, load phase and grid phase are different. Therefore, synchronization is essential. Thus Seamless transfer operation stand-alone to grid-connected mode. In this paper, propose sealmless transfer operation between grid-connceted and stand-alome mode, and this method is verified through simulation and experiment.