• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.12-14
• /
• 2006

This paper presents a novel scene change detection method using intra prediction mode and edge direction in H.264/AVC. When scene change occurs, there are less temporal correlation between frames, most of macro-blocks encoded in intra mode. Using this property, the method calculates the percentage of intra mode blocks in each predictive frame in order to get candidates of scene change frame. To further find scene change, we obtain edge histogram of each candidates by using eight prediction direction of intra prediction mode in H.264/AVC. We detect scene change frames with $\iota^1$-norm of edge histograms. The experimental results show that the method is efficient and robust.

• Transactions of Materials Processing
• /
• v.19 no.4
• /
• pp.236-241
• /
• 2010

The frictional behavior of bare steel sheet highly depends on surface roughness. It was investigated that the change of surface roughness of bare steel sheet due to deformation for each forming mode. The flat type friction test was done to check the effect of surface roughness change on frictional characteristics of bare steel sheet. As increasing the deformation, the Ra value was increased at stretching forming mode and drawing forming mode, however the change of Pc showed different trends. The Pc was decreased as increasing stretch deformation but increased at compression deformation. At drawing forming mode, the friction coefficient was increased as deformation was increased after initial big drop with drawing oil. As deformation was increased, the friction coefficient was decreased with drawing oil at stretching forming mode. The results show that the deformation changes the surface roughness and frictional characteristics of steel sheet but the effect depends on the forming mode.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.930-937
• /
• 2013

In this paper, a motor control algorithm for performing a mode change without an integrated starter generator (ISG) is suggested for the automatic transmission-based hybrid electric vehicle (HEV). Dynamic models of the HEV powertrains such as engine, motor, and mode clutch are derived for the transient state during the mode change, and the HEV performance simulator is developed. Using the HEV performance bench tester, the characteristics of the mode clutch torque are measured and the motor torque required for the mode clutch synchronization is determined. Based on the dynamic models and the mode clutch torque, a motor torque control algorithm is presented for mode changes, and motor control without the ISG is investigated and compared with the existing ISG control.

• The Journal of the Korea Contents Association
• /
• v.6 no.9
• /
• pp.28-41
• /
• 2006

Recently, Baruah et.al. proposed an optimal Pfair scheduling algorithm in the hard real-time multiprocessor environments, and several variants of it were presented. All these algorithms assume the fixed unit quantum size, and this assumption has two problems in the mode change environments. If the quantum size is too large, it results in the scheduling failure due to the decreased processor utilization. If it is too small, it increases the frequency of scheduling points, and it incurs the task switching overheads. In this paper, we propose several methods that determine the maximum quantum size dynamically such that the task set can be scheduled in the mode change environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.18-26
• /
• 2001

In this paper, we propose an ATC(Automatic Transfer mode Controller) algorithm and an average-mode-change method for use in Gear shift PLL which can automatically change loop gain. The proposed ATC algorithm accurately detects proper timing or the mode change and has a very simpler structure - than the conventional lock detector algorithm often used in QPSK. And the proposed average mode change method can obtain low errors of estimated frequency offset by averaging the loop filter output of frequency component in shift register. These algorithms are also useful in designing ASIC, since these algorithms occupy small circuit area and are adaptable for high speed digital processing. We also present phase tracking performance of proposed Gear-shift PLL, which is composed of polarity decision PD, ATC and average mode change circuit, and analyze the results by examining constellation at each mode.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.1 s.22
• /
• pp.41-55
• /
• 2004

The purpose of this study is to investigate a causal relationship between the mode of production and change of rural society. While dominant theories of social change have stressed variation of contingencies and periodical contexts, this theoretical paper drives a new insight paralleling diverse theoretical arguments of each mode of production with rural and urban changes. Investigating the drifts of intellectual ideologies of the mode of production, we get through diverse paradigm shifts of the production accumulation and its trigger effects on rural change. More specifically, the present study investigates change of rural society by way of investigating such fluctuations of societal changes as ancient society, slavery society, feudal society, industrial society, post-industrial society, and information society. We find that transportation and communication technologies have had a key role in the changes, however, the effects of the technologies on social changes have been different between rural- and urban-society. While we take it for granted that flexible accumulation in post-industrial society and time-space compression and informatization in information society will reduce developmental gap between rural- and urban-society, we also found that there have been big differences of actual application of the technologies between theory and reality in each era of mode of production.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.150-156
• /
• 2015

In this paper, a marionette control system using wrist and finger gestures through an IMU sensor is studied. The signals from the sensor device are conditioned and recognized, then the commands are sent to the 8 motors of the marionette via Bluetooth (5 motors control the motion of the marionette, and 3 motors control the location of the marionette). It is revealed that the degree of freedom of fingers are not independent from each other, therefore, some gestures are hardly made. Gesture mode changes for difficult postures of the fingers in cases of a lack of finger DOF are proposed. Therefore, the gesture mode change switches the assignment of gesture as required. Experimental results show that gesture mode change is successful for appropriate postures of a marionette.

• Journal of Sensor Science and Technology
• /
• v.26 no.6
• /
• pp.402-407
• /
• 2017

Characteristics of various material surface plasmon resonance (SPR) chips were investigated in angular interrogation mode and intensity interrogation mode. Among five metals, silver (Ag), gold (Au), copper (Cu), chromium (Cr) and titanium (Ti), three metals, Ag, Au and Cu were paid attention to since their characteristics can be easily analyzed in angular interrogation mode by investigating the change of their reflectance curves according to refractive index change from 1.331 to 1.335. Most of SPR chips with various configurations showed the similar property in angular interrogation mode. The application of the SPR chip made of Ag, Au and Cu or their combinations depends on their reflectance properties. In intensity interrogation mode, the operation range may be limited since the variation of the intensity was not linearly related to refractive index change ranging from 1.331 to 1.335. However, the SPR chip containing high ratio of Ag may be applicable to high sensitive detection due to their sharp reflectance curves in intensity interrogation mode.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.79-81
• /
• 2001

논리적 정확성과 시간적 제약의 만족을 중요시하는 실시간 시스템은 시간이 경과함에 따라 그 기능이 다른 것들로 변화되는 mode change를 요구할 수도 있으며, 그 시간적 제약의 엄격함에 따라 경성 실시간 시스템과 연성 실시간 시스템으로 나눌 수 있다. 유닉스 계열의 운영체제를 확장한 운영체제인 Linux는 연성 실시간을 지원하도록 개발되었으며 이 Linux에 최소의 변경을 가해 경성 실시간을 지원하기 위한 RTLinux가 개발되었다. RTLinux 버전 2.0은 다중 프로세서 시스템을 지원할 수 있도록 재 설계되었지만, 다중 프로세서 환경에서 주어진 태스크들을 각 프로세서에서 정확하고 효율적으로 실행시키기 위한 구체적인 프로세서할당 및 스케줄링 기능은 제공되지 않고 있다. 이러한 사항들을 만족시키기 위해 본 논문에서는 다중 프로세서 환경에서 mode change되는 태스크들이 각각의 mode 범위 내에서 정확하고 효율적으로 실행될 수 있도록 프로세서를 할당하고 스케줄링하는 RTLinux스케줄러를 제시하고 구현하였다.

• Journal of radiological science and technology
• /
• v.44 no.1
• /
• pp.39-46
• /
• 2021

This study confirmed the usefulness of the copper filter according to the mode change by comparing and analyzing the energy change according to the application of the copper filter and the change in effective dose and image quality according to the distance to the subject in the DR(Digital Radiography) system. The average energy increased when the copper filter was applied and the reduction rate by 50% of mAs was increased as the thickness of the copper filter increased according to the application of the 10 kVp rule in AEC mode. The effective dose decreased as the thickness increased when the copper filter was applied in AEC(Automatic Exposure Control) mode and manual mode according to the application of the 10 kVp rule, and the decrease rate decreased with increasing 10 kVp increments. As a result of analyzing the dicom images for AEC mode and manual mode with Image J. the PSNR(Peak Signal to Noise Ratio) values were approximate values of less than 30 dB for each mode and for each copper filter thickness. When the copper filter was applied, the average energy increased, so when the 10 kVp rule was applied, the mAs for each mode could be reduced, and the effective dose could also be reduced. However, as the distance and tube voltage increased, the reduction rate of mAs decreased, and the quality of the image was found to decrease when the copper filter was applied, but there was no difference in quality of the image when the copper filter thickness increased.